3P Instruments
mixSorb S Series
Breakthrough Curve Analyser
- In-situ sample preparation up to 400 °C
- Fully automated control via PC by using mixSorb Manager
- Up to 4 high precision mass flow controllers
-
Key Features
- Determination of breakthrough curves
- Investigation of co-adsorption and displacement
- Determination of sorption selectivity
- Estimation of applicability of synthesized materials in technical processes
- Dynamic adsorption and desorption experiments
- Determination of single- and multi-component adsorption data
- Investigation of kinetic performance of novel materials
- In-situ sample preparation up to 400 °C
- Fully automated control via PC by using mixSorb Manager
- Automated regulation of the adsorber pressure up to 8 bar
- Up to 4 high precision mass flow controllers
- Automated built-in gas and gas/vapor mixing
- Measurement of inlet and outlet gas composition
- Tempering of sample cell by thermostat automatically
- Monitoring of pressure drop along the sample cell
- Built-in Thermo Conductivity Detector (TCD); optional gas analysis via interfaced Mass Spectrometer
- Safety guard sensor for flammable gases for automatic shut down
- Enhanced Safety by intelligent illuminated workspace
-
Techniques
Vapour Adsorption
Mixed Adsorption of Gases
Breakthrough Curves
-
models
Model S
S eco S ambient SHP eco SHP
Pressure range 0.1 – 8 bar
0.1 – 8 bar 0.1 bar – ambient 0.1 – 35 bar 0.1 – 68 bar
No. of MFCs 2 – 4
Required inlet pressure 15 bar
15 bar 15 bar 85 bar 85 bar
No. of Evaporators Up to 2
Pressure control Yes
Yes No Yes Yes
Simulation Software Incl.
Optional Incl. Optional Incl.
Gas sensor Yes
No Yes No Yes
TCD Incl. 13 factory calibrations
Incl. 1 factory calibration Incl. 13 factory calibrations Incl. 1 factory calibration Incl. 13 factory calibrations
Sample bed temperature sensors Up to 4
Sample loading < 0.1 cm³ – 5 cm³, customized adsorbers on requests
Temperature range heating mantle Ambient – 400 °C
Temperature range circulator bath -20 °C – 90 °C
Not sure if it’s the right instrument?
No worries, send us a sample and we will test it for you
Send a sample-
Outstanding service
I have been using Meritics for a number of years and they always provide outstanding service and support.
They have a rapid response turnarounds and are very knowledgeable of the techniques and products they provide.LeanneB-375
-
Good service, very helpful
We use Meritics for the PM service and installation of all our FlowCams . Megan has been coming to our site for a number of years. She is very efficient in her work, but most of all Megan is very helpful. We have had issues with one of instruments after the install and Megan did her utmost to try and solve it while on site, even though it wasn’t solved Megan has been in contact with the supplier of the instrument to try and solve this problem for us.
SophieH-2201
-
Job done in a friendly manner
Booking engineer visits is always easy. David Lowe, Meritics engineer is always very friendly.
ThierryN
-
Service/calibration visit
Excellent service, arrived on time, polite, friendly and informative.
NathamM-270
-
5 Stars
Excellent service from an excellent company. Would recommend them to anyone.
BarryH-480
-
Good Service
David, our service engineer as usual was good at communicating and setting up the recent service appointment, he arrived on time, did the service promptly and informed me of any problems. Friendly and helpful
TomA-446
-
Superb and prompt service
I have used this company through the laboratory I work for frequently. We specialise in soil analysis, and Meritics were chosen as they have extensive knowledge of the instruments we use. We have several laser particle diffraction analysers with a service contract, and service is always very prompt and meticulous….
JamesG-2483
-
Good experience over two years
Meritics have covered the annual servicing of our Multisizer 4e instrument since we purchased it from them just over two years ago. The application scientist who performed the servicing was friendly, knowledgeable, and extremely helpful, happily answering a barrage of questions about how best to use and maintain the instrument. All my interactions with Meritics staff have been positive. I would happily recommend them.
RajG-62
-
Fully committed to customer service
Service second to none, both units serviced and all questions answers by engineer while on site.
RichardA-786
-
Highly recommend Meritics for equipment purchases and aftercare services
After owning one of our instruments for over 8 Years which was purchased from Meritics, it suffered its first breakdown. Upon contacting Meritics, I was instantly put through to an engineer who was very helpful. Upon inspection of the manual, it was decided that it would be more cost effective to have a Meritics engineer visit. The Meritics staff were very communicative and kept me up to date.
-
Excellent Service
Lovely, friendly and extremely helpful. David and his team are always on call with advise and are very easy to work with and are always happy to help.
NaomiT-64
-
Service of lab equipment
Excellent service. Friendly and professional service was provided in a timely manner to the expected standard.
NathanM-270
-
Excellent
Excellent communication. Updates given well in advance. Very polite staff and engineers.
NathanM-270
-
Multisizer 4e install at pharmaceutical company
2 people helped with the install of a Multisizer 4e. They were both very professional and friendly, answering any questions that I had. The installation was quick and the attention to good documentation practice was exceptional.
Chloel-9
-
Service of Beckman Coulter instruments
Always a pleasure to welcome the Meritics service engineer, who is knowledgeable, personable and extremely competent.
NeilT-394
-
Professional
Friendly and collaborative staff, provided a very good service.
SamK-403
-
Professional, Customer-oriented, fast service
We had issues with one of the aperture tubes provided by Meritics on a Friday afternoon, while very pressed for a review deadline. Meritics handled our inquiries very fast and professionally and helped us out by shipping us their spare tube to use in the mean time free of charge, while we waited for our new tube to arrive. Communication was very pleasant.
VeerleB
-
Very helpful and prompt
I emailed for some technical help and also to get some spares and both the engineer (David) and purchasing (Sophie) were very prompt to respond and helpful. We do have a service contract but I appreciated being able to email the engineer directly.
AlexH-474
-
Excellent Service
Used Meritics to conduct particle size distribution by laser diffraction. Service as last time, is very quick, well priced and professional.
I would highly recommend
GavinR-101
-
Excellent and Friendly Service
Always a pleasure to deal with the people at Meritics Ltd. They understand the importance of our work and the fact that our research projects have deadlines that need to be met. Consequently, problems are dealt with very quickly and professionally and they are willing to go that one step further to make sure their supply chain problems don’t become our problems. Thank you to the team for their support. It is greatly appreciated.
JanetH-255