Latest Articles
Articles 17161 to 17170 | Page 1717 of 2416
18 April 2013
-
Hamamatsu Linear CMOS Image Sensor with Active Pixel Sensor Technology and Direct UV Sensitivity
Hamamatsu Photonics are proud to introduce the S11638 CMOS linear image sensor with APS (Active Pixel Sensor) technology.
-
Hamamatsu Photonics 2D InGaAs Image Sensor
Hamamatsu Photonics introduces the G11097-0707S, a brand new 128 x 128 pixel two dimensional InGaAs image sensor, that compliments the existing range of high performance linear and area image sensors.
17 April 2013
-
Cloud External Case from Notice Board Company
Notice Board Company introduce the Cloud external notice board, perfect for external use.
-
New smart loop powered Dual Relay Alarm / Switching Unit from Status
Status Instruments has launched SEM1636, a new ‘Smart’ (4 to 20) mA loop powered switching / alarm unit. Designed to monitor a (4 to 20) mA loop, the SEM 1636 provides two independent change over trip contacts set to trip at any point within the (4 to 20) mA range.
-
Status launch Temperature Slidewire Switching Unit
The SEM1633 provides an accurate alarm / switching function when used with RTD or Slidewire sensors. The flexible design allows the use of any resistive sensor within the range of (10 to 10000) Ω. Including Pt100, 500, 1000, Ni or Cu sensors as well as slide wire sensors up to 100KΩ.
-
New ATEX approved RTD Slidewire Transmitter from Status
Status Instruments has launched an ATEX / IECEx approved rail mounted ‘smart’ transmitter which converts a signal from RTD, slidewire or thermocouple sensors into an industry standard (4 to 20) mA loop powered output.
-
New DIN Isolator from Status scales input to process value
Status Instruments has launched SEM 1600VI, a new cost effective ‘smart’ powered DIN rail isolator/conditioner that has a built in capability to scale and linearise the input signal to a process value.
16 April 2013
-
New adaptable Signal Conditioner from Status
Status Instruments has launched a new flexibly designed signal conditioner. The SEM1600T accepts resistance or mV signals from RTD, slide wire or thermocouple sensors and converts them to a user selected current or voltage output.
-
Go Wireless for easy temperature monitoring
The advent of wireless technology has brought many benefits to the process control industry and in many applications offers a more practical solution than the hard-wired alternative, according to Ian Pullin, managing director of Status Instruments. The company has recently launched a wireless temperature monitoring system.
-
Status Instruments new SEM1750 – do the maths
Status Instruments has launched one of the most advanced but user friendly Dual Channel Signal Conditioners of its type on the market.
Articles 17161 to 17170 | Page 1717 of 2416