Self aligning UC Series flange mount shaft bearings from Elesa
17 December 2015
Elesa’s new UC range of self-aligning flange bearings offer easy installation for rotating shafts on equipment such as conveyor systems, where their tolerant fit and protected bearings enable quick, simple assembly or replacement.
Natural shaft alignment up to ±2.5 degrees off centre, together with a re-lubrication facility via a traditional grease nipple, ensures that Elesa flange bearings have a long service life, keeping the shaft turning and the goods moving.
The UC range comes in square flanged, side flanged or surface mounting formats with through shaft or end capped bearings. Housings are in glass reinforced polyamide with stainless steel bushings and washers holding high quality chrome steel bearings, all with ISO 3228 compliant dimensional tolerances to ensure a consistent fit.
Standard sizes fit 25 and 30mm shafts while custom special variants include AISI 440C stainless steel bearings, imperial sizes, non-standard shaft sizes and brackets in anti-bacterial material, also polypropylene based (PP) technopolymer, packing rings and Viton® oil seal for food or high demand environments.
Other Press Releases By This Company
- 02/10/2024 - Elesa UK and the Washing Machine Project collaborate for a better future
- 03/09/2024 - Furniture
- 29/08/2024 - Innovative Collaboration Between Elesa and Metallic Elephant Sets New Standards in Hot Foil Press Technology
- 11/07/2024 - ELESA Wins Good Design® Award for Innovative M.2000-SWM
- 06/06/2024 - Elesa introduces the awarded TCC system: strength, durability, and versatility in tubular clamp connectors
- 09/04/2024 - New ELESA Vacuum Suction Cups for automation
- 07/03/2024 - ADI Design Index: selected the ELESA M.2000-SWM “Handle with monostable switch and LED indicator light”
- 08/02/2024 - Elesa Presents Visual Flow Indicators with Integrated Measurement Capabilities
- 04/01/2024 - Elesa Expands Further into ATEX-Compliant Hydraulic Components
- 09/11/2023 - Elesa Joins Forces with Experts in Material Handling, Jenco.
- 03/10/2023 - Hygienic design standard components: A new meaning to "Hygiene"
- 07/09/2023 - Vibration damping levelling feet and Super-technopolymer ball joint
- 27/04/2023 - Self-Sanitisation with Elesa Machine Components
- 03/11/2022 - ELESA protection elements - Quick and effective solutions
- 09/08/2022 - M.2000-SWM handle With electrical safety switch and LED indicator light
- 21/06/2022 - High quality ELESA magnets
- 20/06/2022 - Level bubbles
- 20/06/2022 - New MPI-R10-RF Magnetic measuring system with data transmission via radio frequency Length or angle modes
- 20/06/2022 - Modular roller tracks
- 14/06/2022 - Beauty in Engineering Solutions
- 14/06/2022 - EVH. Tubular handles oval cross section
- 14/06/2022 - Elesa solution for high temperatures
- 21/12/2021 - Elesa quality handles for commercial catering equipment
- 20/12/2021 - New industrial magnets added to Elesa range
- 02/12/2021 - New Elesa SFX series hydraulic anti-splash breather caps, plus dipstick
- 23/11/2021 - Elesa interlocked hinge protects packaging equipment
- 03/11/2021 - New Elesa connecting clamps in technopolymer for tubular frames and mountings
- 28/10/2021 - Elesa standard machine components at the Advanced Engineering Exhibition, 3-4 Nov at the NEC – stand G10
- 30/09/2021 - Elesa digital position indicators meet the time challenge for Packaging machine manufacturers
- 23/09/2021 - New Elesa stainless steel hinges in AISI 304 grade
- 03/09/2021 - New Elesa IP65 interlock handles in stainless steel and aluminium, with electronic and pneumatic pushbuttons
- 13/08/2021 - Elesa standard elements for packaging machines at the 2021 PPMA Show – Stand No. E01
- 06/08/2021 - New Elesa linear actuators for Robotics and Machine Tools
- 26/07/2021 - Elesa toggle clamps with extended lever solve the reach problem
- 12/07/2021 - New Elesa Ball Transfer Units, Roller Tracks and Conveyor Balls
- 16/06/2021 - New Elesa SAN industrial components incorporate silver ions for sanitisation against microbes, bacteria and fungi
- 15/06/2021 - Elesa extend their ESD range into castors and wheels for sensitive and hazardous areas
- 02/06/2021 - Elesa standard component manufacturing goes Green with hydroelectric and other 100% renewable power
- 18/05/2021 - Elesa MPI-R10 linear and angular magnetic measuring system – simple, accurate, reliable
- 22/04/2021 - Elesa Visual Flow Indicators - now with Flow Meter sensor
- 13/04/2021 - Elesa new CFMX hinges in high strength Supertechnopolymer
- 10/03/2021 - Elesa angled handles inclined to make things easier for many industries
- 12/02/2021 - Elesa flexible coolant hoses support many applications
- 08/02/2021 - Elesa launch new ranges of protective caps and plugs
- 21/01/2021 - Elesa launch high performance Misati pneumatic clamps for automation and robotics applications
- 20/01/2021 - Elesa establish a quality manufacturing process for industrial components and address the issue of quality in today’s industrial marketplace
- 14/01/2021 - Elesa launch high performance Misati pneumatic clamps for automation and robotics applications
- 01/12/2020 - Support for the Packaging Industry – Elesa standard components make life easier with new brochure
- 13/11/2020 - Elesa announce new wire rope arrival to vibration damper family
- 14/10/2020 - Elesa standard industrial elements support the welding equipment industry
- 12/10/2020 - Elesa standard components for machine enclosures and guards
- 16/09/2020 - Elesa new FH Modular Coolant Hose system
- 14/09/2020 - Elesa supports the Waste Management Industry with specialist standard components
- 05/08/2020 - Elesa support COVID security with screen mounting clamps for shops and industrial safety
- 03/08/2020 - New Elesa pneumatic fastening clamps speed manufacturing processes
- 15/07/2020 - Elesa High Performing Components address the needs of Process Control Industries
- 02/07/2020 - Elesa standard Ergostyle® components for the Office Equipment industry
- 04/06/2020 - Elesa – Metal and Visually Detectable components for food and pharmaceutical production lines
- 14/05/2020 - Elesa Industrial Magnets – a new take on many options for positioning, clamping and retention
- 05/05/2020 - Elesa ESD components – attractive to the spraying and powder coating industry
- 04/05/2020 - Lighting industry components - Elesa focuses on standard mounting elements
- 06/04/2020 - Elesa expand high-performing SAN (sanitary) components range for hygiene environments
- 23/03/2020 - Elesa standard components for Audio Visual Equipment
- 04/03/2020 - Elesa – New Expanded Catalogue and E-Commerce website
- 25/02/2020 - Elesa High Performing components for textile industries
- 05/02/2020 - Elesa announces production industry service focus on the Furniture Industry
- 13/01/2020 - Elesa at Southern Manufacturing & Electronics 2020
- 19/12/2019 - External hinges from Elesa – enclosure doors to equipment safety cut-off
- 09/12/2019 - Elesa open the door for Newgate Secure Access Solutions
- 03/12/2019 - Stainless steel from Elesa – synonymous with quality - catalogue supplement
- 12/11/2019 - Expanding machine element range from Elesa - new catalogue supplement
- 24/10/2019 - WestRock Linkx Systems and Elesa reduce packaging machine change over times – reduce errors - giving repeatable savings
- 14/10/2019 - Elesa Indicators – a story of quality
- 27/09/2019 - Elesa – standard elements at the Advanced Engineering Exhibition, NEC, 30-31 October, Stand No. A2
- 06/09/2019 - Elesa at PPMA Exhibition, 1-3 October @ NEC, Stand No. E03
- 22/08/2019 - Elesa unique Ergostyle® design – a market responsive approach
- 08/08/2019 - Elesa RE series castors and wheels offer broad range of types and materials for industrial purposes
- 29/07/2019 - Elesa levelling feet match industrial applications and aggressive environments
- 17/07/2019 - Elesa ZCR and ZCL modular transmission elements – racks and spur gears
- 19/06/2019 - ELECOLOR® machine tool components
- 29/05/2019 - Elesa save Aquaflame time and money – and ease production issues
- 09/05/2019 - Elesa roller tracks make moving the load easy
- 24/04/2019 - Elesa clamps facilitate sensor and equipment mounting systems
- 04/04/2019 - Elesa hygienic knobs and handles
- 14/03/2019 - Elesa hygiene levelling feet now EHEDG Certified
- 05/03/2019 - Protecting Personnel and Equipment – latches from Elesa
- 08/02/2019 - Heavy Duty clamping – effective force from Elesa
- 25/01/2019 - Elesa announce standard machine components for 2019
- 08/01/2019 - Elesa at Southern Manufacturing Exhibition, FIVE, Farnborough, 5th – 7th February 2019, Stand No.: F250
- 20/12/2018 - Elesa non-contact magnetic measuring system speeds machinery processes – adds precision
- 19/12/2018 - Elesa Soft-Touch components – comfort and control
- 28/11/2018 - Soft Polyurethane Wheeled Castors from Elesa
- 12/11/2018 - New Standard Components – modular Racks and Spur gears from Elesa
- 26/10/2018 - Elesa level monitoring accessories and labelling provision simplify Hydraulic systems
- 02/10/2018 - Elesa LMHD levelling feet – meeting hygiene standards, cleaning quickly and efficiently
- 18/09/2018 - Elesa interlocked hinge gets it all wrapped up with TRAKRAP
- 11/09/2018 - Elesa at the Advanced Engineering Exhibition, NEC Birmingham, 31st October – 1st November 2018 Stand No. A16
- 28/08/2018 - Elesa electrical machine safety products
- 16/08/2018 - Elesa – speedy snap locks – where light weight and speed matter
- 10/08/2018 - Elesa at PPMA Exhibition, Birmingham, NEC, 25th – 27th September, Stand No. E02
- 02/08/2018 - Elesa ESD components enhance electronics handling equipment
- 16/07/2018 - Elesa – New Product Supplement
- 04/07/2018 - Elesa Profile Compatible mounting components for aluminium frame machine screens and guards
- 22/06/2018 - New Elesa Profile Compatible Handles for industrial aluminium frames
- 18/06/2018 - Elesa handwheels “go anywhere – Jack”
- 29/05/2018 - Elesa stainless steel industrial components for exceptionally robust service
- 04/05/2018 - Elesa high quality chrome on engineering plastic rivals stainless steel for standard components in hygiene applications
- 24/04/2018 - Elesa strong industrial retaining magnets keep it all together
- 06/04/2018 - Elesa IP65 latches for specialist cabinet locking systems
- 27/03/2018 - ATEX compliant standard components for hydraulic systems – from Elesa
- 16/03/2018 - When colour is a value – choose Elesa
- 12/02/2018 - Elesa at MACH Exhibition, Birmingham, NEC - 9th – 13th April 2018, Hall 6, Stand No. 72
- 22/01/2018 - Elesa machine safety components – hinges, handles and handwheels
- 22/12/2017 - Elesa Ergostyle® brings comfort and style to standard machine elements
- 06/12/2017 - Vibration-damping mounting elements from Elesa
- 27/11/2017 - When colour is a value
- 07/11/2017 - CLEAN line clamping knobs and pull handles from Elesa
- 30/10/2017 - Elesa ELEROLL – Roller and Ball Track Transfer Units
- 17/10/2017 - SAN handles from Elesa provide antimicrobial protection
- 05/10/2017 - Elesa at the Advanced Engineering Exhibition, NEC, 1st – 2nd November, Stand No: A16
- 28/09/2017 - Elesa tubular handle with integral safety switch
- 21/09/2017 - Electrostatic Discharge protective standard machine elements from Elesa
- 04/09/2017 - Bridge handle front fastening kit from Elesa
- 29/08/2017 - Elesa at PPMA Exhibition, NEC, 26th - 28th September, Stand No: E02
- 21/08/2017 - Elesa at SPE Offshore Europe Exhibition, Aberdeen, 5th – 8th September, Stand No: 3A200
- 15/08/2017 - Machine safety components from Elesa
- 31/07/2017 - Elesa clamping lever handles and knobs include UL “V0”
- 11/07/2017 - quarter-turn latches, locks and bridge handles
- 15/06/2017 - New Elesa retained clamping screws for equipment assembly
- 08/06/2017 - New ATEX hydraulic accessories from Elesa
- 02/06/2017 - New high quality plastic hinges from Elesa
- 19/05/2017 - Elesa breather caps and level indicators hit the mark for Sarum Hydraulics Micropac hand pumps
- 12/05/2017 - New chrome plated elements from Elesa – lobe knobs, adjustable handles, latches and finger handles
- 08/05/2017 - Developments in standard machine elements – incorporating high performing lines
- 25/04/2017 - New Plastic hinges and mounting adjustment devices
- 21/04/2017 - Profile Compatible interlock hinges, panel support clamps, hinges, corner brackets and handles for Safety Workstations from Elesa
- 31/03/2017 - New Latch clamps from Elesa
- 17/03/2017 - Elesa – high performing Stainless Steel Standard Components
- 03/03/2017 - New Elesa DVB and DVC vibration damping elements
- 16/02/2017 - Elesa IP65 security products – locking T handles, Swing handles and quarter-turn locks
- 01/02/2017 - Elesa High Performing Soft-Touch operating elements and clamping components
- 24/01/2017 - New Elesa standard industrial components catalogue
- 19/01/2017 - Bull’s eye spirit levels from Elesa
- 09/12/2016 - Electronic Enclosures - Hardware Solutions from Elesa
- 28/11/2016 - Magnets from Elesa – temporary fixings for instruments to signage
- 11/11/2016 - Vibration damping from Elesa – inside and out
- 28/10/2016 - New Elesa MLP side handles with finger protection
- 14/10/2016 - New Elesa support clamps for machine guard panels and wire mesh
- 06/10/2016 - New Elesa HVF in line visual flow indicators
- 21/09/2016 - New Circular Toothed Clamping Plates from Elesa
- 30/08/2016 - Elesa VCT-LP series retained lobe knobs
- 12/08/2016 - Elesa GFL lobe nut for equipment adjustment
- 13/07/2016 - New Product Stainless steel 3 lobe clamping knobs from Elesa
- 21/06/2016 - New recessed pull handle with integral latch/lock from Elesa
- 08/06/2016 - New TMB series magnetic plugs from Elesa
- 19/05/2016 - Elesa announce new LV.FO series high stability equipment mounting feet
- 06/05/2016 - New Catalogue
- 21/04/2016 - New 90° stability handles from Elesa
- 07/04/2016 - New Elesa catalogue – industrial castors and wheels
- 31/03/2016 - New Elesa CMUF 270° adjustable friction hinge
- 18/03/2016 - Elesa Standard Machining Service saves time, eliminates waste, cuts costs
- 07/03/2016 - New Elesa catalogue brings together industrial handles for special applications
- 26/02/2016 - New IP65 flush fit compression T bar latch from Elesa
- 18/02/2016 - New lifting lock pins from Elesa
- 08/01/2016 - New Elesa MO series Horizontal Toggle Clamps with anti-release trigger
- 09/12/2015 - Elesa Bridge Pull Handle with integrated micro switch for remote operation
- 26/11/2015 - Anti-microbial, flexible EBP Bridge Handles from Elesa
- 12/11/2015 - Innovative Pneumatic Switch Bridge Handle from Elesa
- 11/11/2015 - Elesa twin wheel castor – low height high load capacity
- 05/11/2015 - Elesa TLR tensile compensated hook clamp is vibration resistant
- 15/10/2015 - Elesa Stop Lock retains position under vibration conditions
- 14/09/2015 - Elesa Torque Amplifier Collar doubles clamping force
- 08/09/2015 - New Elesa catalogue – Accessories for Hydraulic Systems
- 24/08/2015 - Elesa’s new VTT three-lobe handwheel for frequently cleaned environments
- 14/08/2015 - New Quick Catalogue from Elesa speeds product reference for standard machine elements
- 29/07/2015 - Elesa at PPMA 29 Sept – 1 Oct @ NEC Stand No A16
- 17/07/2015 - Quick assembly IP65 ¼ turn locking latches from Elesa
- 18/06/2015 - The new cost-reduced Q series levelling feet from Elesa
- 11/06/2015 - Elesa GN series connecting rods and clamping system for equipment mounting
- 19/05/2015 - Elesa Ball Lock Pins – positive fixing made quickly and safely
- 07/05/2015 - New Lobe and Diamond cut Knurled Knobs from Elesa for position indicators
- 16/04/2015 - Elesa LMR non-slip levelling feet take custom shafts
- 01/04/2015 - New Elesa spoked handwheels for food, pharmaceutical and medical industries
- 01/04/2015 - New spoked handwheels from Elesa for food, pharmaceutical and medical industries
- 16/03/2015 - New Elesa Catalogue
- 20/02/2015 - New Product- Elesa Flush Pull Handles with snap-in assembly and integral locks
- 12/02/2015 - Graduated ring control mechanism from Elesa
- 09/02/2015 - New Product - New polyamide handles from Elesa
- 12/12/2014 - New Latch Clamps from Elesa with safety locks
- 26/11/2014 - Versatile New IP65/67 Direct Drive Electronic Position Indicator from Elesa
- 07/11/2014 - New clamping levers from Elesa UK provide quick, easy clamping forces up to 8 kN
- 27/10/2014 - Elesa Panel Support Clamp judged PPMA “Most Innovative Auxiliary Equipment”
- 13/10/2014 - New Elesa Tubular Handle with high electrical insulation properties
- 17/09/2014 - New Modular Roller Tracks from Elesa
- 15/08/2014 - Elesa SLCK kit turns column level indicators electronic
- 28/07/2014 - New MP series Folding Handles from Elesa
- 23/07/2014 - New IP65 Quarter-Turn, Quick-Fit Latches from Elesa
- 10/07/2014 - New IP65 Quarter Turn Quick Fit Latches from Elesa
- 30/06/2014 - New Light Duty Levelling Feet from Elesa
- 24/06/2014 - New BMS Detent Catch and Finger Pull from Elesa
- 24/06/2014 - New Elesa Tubular Handles with adjustable mounts
- 24/06/2014 - New IP65 Stainless Steel Compression Lever Latch from Elesa
- 24/06/2014 - New Elesa Lock Pins in Stainless and Steel
- 24/06/2014 - New Push-Push Indexing Plungers from Elesa
- 24/06/2014 - Flush Pull Handles with snap-in assembly from Elesa
- 24/06/2014 - New Stainless Steel Eccentric Cam Clamping Levers from Elesa
- 06/03/2014 - New Clamping Device for Round Shafts from Elesa
- 20/02/2014 - Extended range of industrial castors and wheels from Elesa UK
- 07/02/2014 - Flanged Mini Indexing Plungers from Elesa
- 09/01/2014 - New Shoulder Screws from Elesa with Collar
- 12/12/2013 - Diamond Cut Knurled Knobs from Elesa
- 05/12/2013 - New Finger Pull Handles From Elesa
- 29/10/2013 - Elesa Stainless Steel Handwheels for specialist applications
- 08/10/2013 - Magnet range from Elesa - permanent fixing for industry
- 01/10/2013 - Locks, latches & hinges - enclosure solutions from Elesa
- 16/09/2013 - Elesa components for Vibration Damping
- 30/08/2013 - New Slotted Stainless Steel Control Knobs from ELESA
- 09/08/2013 - Elesa expands corrosion resistant Stainless Steel standard component range
- 26/07/2013 - GN 924 Hand Wheel from Elesa - a modern, attractive 2 spoke solution
- 12/07/2013 - New Lever Indexing Plunger from Elesa has 'super' Technopolymer construction
- 03/07/2013 - Solid Aluminium Handwheel range from Elesa
- 12/06/2013 - New Panel Support Clamp from Elesa
- 31/05/2013 - Frame Tube Joiners and End Caps from ELESA
- 16/05/2013 - IP67 Safety Switch & Hinge freom Elesa
- 29/04/2013 - Round and Square Height Levelling End Caps from ELESA
- 12/04/2013 - New Column Level Indicators from Elesa with Oil and Glycol capabilities
- 27/03/2013 - Light to heavy duty industrial Castors from Elesa
- 20/03/2013 - Rubber wheeled Castors from Elesa
- 06/02/2013 - Machine Guarding components & systems from Elesa
- 12/11/2012 - Elesa launches new Vulcanised Rubber Wheeled Castors
- 25/10/2012 - New Levelling Feet with ground fixing from Elesa
- 23/10/2012 - New Detent Position Hinges from Elesa know their place
- 28/09/2012 - New Indexing Plungers with clamp plus added safety function from Elesa
- 06/09/2012 - Elesa at PPMA 2012, Hall 5, Stand E70
- 05/09/2012 - New Retracted Rest Spring Plungers from Elesa offer safety & security in one
- 03/09/2012 - New clamping components enhance Elesa's adjustable mounting system
- 27/07/2012 - Elesa launches new clamping Hand Knobs
- 13/07/2012 - Elesa UK introduce Lobe Knobs with cushioned bolt
- 28/06/2012 - Elesa launch semi-split set collar clamping assemblies
- 20/06/2012 - Comprehensive hinging from Elesa
- 06/06/2012 - Elesa IP67 Hinge provides safety switch protection for operators
- 14/05/2012 - Elesa launch new Mini Indexing Plungers
- 24/04/2012 - GN425.5 corrosion resistant folding handles from Elesa
- 12/04/2012 - New GN702 Stop Locks from Elesa keep things in place
- 26/03/2012 - Elesa Cam Action Indexing Plungers enable positioning at the flick of a finger
- 15/03/2012 - New Quick Release Set Collars from Elesa
- 05/03/2012 - 2000+ new products feature in new Elesa catalogue
- 17/02/2012 - Elesa has the solution if you're feeling cranky
- 31/01/2012 - 2, 3 and 4 arm Handwheels from Elesa
- 05/01/2012 - Fixed and Revolving - Elesa Handles the Lot!
- 04/01/2012 - Elesa's Handwheel Safety Feature - Fold Away Handles
- 08/12/2011 - Elesa Lever Handles - Simple Leverage For Everyday Clamping
- 28/11/2011 - The Ubiquitous Wing Nut - An Elesa favourite
- 09/11/2011 - Corrosion Resistant Fork Rod Ends from Elesa
- 25/10/2011 - Spring Latches - New Standard Components From Elesa
- 19/10/2011 - Elesa's smart new GN315 Push Button Snap Locks
- 06/10/2011 - Elesa indexing spring plungers with safety rest position and security key operation
- 20/09/2011 - Adjustable MRT Handles suit clamping in tight spaces
- 12/09/2011 - Corrosion-Resistant Grab Handle with safety lock from Elesa
- 06/09/2011 - Woodworking Equipment - Standard Components from Elesa
- 02/08/2011 - IP65 Anti-Rotation Latch from Elesa
- 28/07/2011 - Gracefully Aesthetic Arch-Shaped Pull Handles from Elesa
- 27/06/2011 - Elesa has standard components for printing and paper processing machines
- 13/06/2011 - Elesa's new Latch/Handle and Cabinet Control Rod System
- 08/06/2011 - Elesa low maintenance Spherical Rod Ends for Control Actuation
- 18/05/2011 - New Elesa Re-Programmable Lock Latches
- 28/04/2011 - Cool Hand Elesa
- 13/04/2011 - ELESA SPHERICAL ROD ENDS KEEP LINKAGES MOVING – ACCURATELY!
- 29/03/2011 - Vibration damping elements from Elesa
- 09/03/2011 - Elesa's new softly-softly industrial castor
- 09/03/2011 - Packaging machines get standard components from Elesa
- 09/03/2011 - Security focused off-road hydraulic solutions from Elesa (UK) Ltd
- 09/03/2011 - Self custom float level indicators from Elesa
- 09/03/2011 - Components for Postural Seating and Therapeutic Equipment
- 09/03/2011 - Selection of castors for industrial situations
- 08/03/2011 - New FJT fork rod ends from Elesa suit food and pharmaceutical machinery
- 14/01/2011 - Metal working industry gets standard components from Elesa
- 13/12/2010 - Elesa launch self custom float level indicators
