AudioJoG Pro 8 now in Stainless Steel
08 August 2022
Cable testing solutions provider CableJoG have re-launched their already successful AudiojoG Pro 8 in a Stainless Steel enclosure.
![AudiojoG Pro 8, CablejoG](/files/articleimages/33236.jpg)
There are 2 rows of 9 LED's corresponding to each of the possible connector pins and one for the screen (or ground) connection. As each pin is activated, the LED's indicate all connections associated with that pin,so that short, open and crossed circuits can be easily found. The LED's also show the possibility of high resistance or leakage connections. 2 LED's indicate a good digital network connection, either Straight through, or Crossed over.
Connectors
3, 4 & 5 Pole XLR Male & Female
6.35mm Jack, stereo or mono
3.5mm Jack, stereo or mono
2.5mm Jack, stereo or mono
2,4 & 8 Pole Speakon
MINI DIN 4 Pole
DIN 3, 5 (180o) & 8 Pole
RCA Phono
BNC50/75W / HD SDI
RJ45, Ethercon
USB A & B
Mini & Micro USB
4mm Red & Black
Memory
There are 6 LED's indicating the state of the MEMORY.
If the MEMORY LED is on, then AudioJoG Pro 8 automatically scans all the connections and compares against information held with just one press of the test button.
MEMORY works in single and double ended test modes..
INTERMITTENT fault detection uses the memory to continuously test the cable until a fault is found.
Test Modes
Double ended - both ends of the cable under test are plugged into the AudioJoG Pro 8
Single ended - one end of the cable under test is plugged into AudioJoG Pro 8 the other into another AudioJoG Pro 8 or any other compatible AudioJoG tester.
Specification,Double {Single} ended
Continuity and Short Circuits, less than 255K {75K} ohms
OpenCircuits (end to end and between connected pins), greater than 255K {75K} ohms
Lessthan 2 {5} second test time
Sturdy METAL BOX construction
L203mm W 150mm D 50mm
Uses 9v PP3 battery (notsupplied)