Approved Business Logo
Login

Approved Business uses its own and third parties’ cookies in order to improve your experience and our services. These cookies provide a better performance, enhanced features and enable certain functionalities. You can obtain more information and learn how to change the configuration of your browser, including how to block some cookies, in our Privacy Policy. However, you should know that blocking some types of cookies may impact your experience on the site and limit the services we are able to offer.

08 June 2009 | HW Andersen Products Ltd

Ethylene Oxide sterilisation breaks the four hour barrier

Ethylene Oxide (EtO) has been used as a sterilant for nearly eighty years now. It has stood the test of time as a very effective sterilant, being good both at killing a wide range of pathogens and at sterilising the most complex shapes.

It continues to be a major technology for the sterilisation of medical devices world wide. Indeed, if you look at the back of packages containing devices for use in surgery some 70% contain the statement “Sterile EO”.

The majority of medical devices sterilised by EtO are designed for single use. The insight of Dr Andersen in the 1960''s was to deliver the EtO directly to the heart of the load, in a glass ampoule. This allowed sterilisation to be achieved without any of the compressed gas cylinders, steam lines or compressed air required by traditional, large EtO chambers. It also allowed sterilisation to be achieved with a small fraction of the EtO used by other technologies. In short EtO sterilisation became accessible to hospitals and clinics. They could do their own EtO gas sterilisation in their own facility, opening a whole new world for re-sterilisation of medical devices.

The challenge for EtO as a technology remained the time required for a sterilisation cycle. Even in the Andersen chambers a cycle would typically be run overnight. There was also the requirement for aeration before devices could be used on a patient. It is a feature of EtO that it is absorbed by many materials, particularly soft plastic, and this may need to elute before a device can be re-used.

The latest EtO steriliser from Andersen Products is the Series 4. This delivers the benchmark 10-6 sterility assurance level in 3½ hours. Furthermore, as this cabinet runs at 50ºC the items can be left in the cabinet for a further hour to drive off residual EtO. The result is that EtO sterilisation now delivers all items sterilised and ready for use in 4½ hours. This highly efficient steriliser gives users the ability to use the most effective sterilant and reuse their delicate and expensive equipment again the same day.

Other Press Releases from HW Andersen Products Ltd

27/4/2023 - Anprolene AN75 The only FDA-cleared, room-temperature gas sterilizer.
08/4/2022 - Anprolene AN75 The only FDA-cleared, room-temperature gas sterilizer. Recommended for all medical providers.
15/12/2020 - Andersen Sterilizers First Ethylene Oxide (EO) Gas Sterilization System cleared by FDA 510(k) for Terminal Sterilization of Duodenoscopes and Colonoscopes Haw River, NC−Andersen Sterilizers, international manufacturer of high-efficiency, flexible chamber, low temperature gas sterilizers, today announced 510(k) clearance by the U.S.
15/9/2009 - Ethylene Oxide − the future of gas sterilisation So far, 99% of the global use of EtO has been in the manufacture of Ethylene Glycol, an intermediate in the production of anti-freeze and Polyester.