IP54 Wall Mounted Panels

Harland Simon UPS continue to manufacture a range of IP54 Wall Mounted Panels, which are used widely in Industrial/Utility applications and designed to take various AC UPS''s we offer (Eaton, Riello, Emerson...)

Depending on the project, the IP rating requirements will vary and may be higher than the typical IP20. Our cubicles are IP54 as standard. The IP54 protection enables the AC UPS to be fitted in harsh environments. The specification below is for our Wall Mounted type which fit a combination of UPS, Battery Packs or Loose Batteries, depending on load and autonomy. Standard Product Features Finish RAL7035 (light grey) Battery Type As per UPS fitted or high quality 10 year design life, loose, VRLA Panel is fitted with AC UPS Side Mounted Filters Side Mounted Cooling Fan Earth Stud Solid Door Input and Output Isolator Base Mounted Connection Terminals Manual Bypass Switch Indication Lamps Optional VFC Alarms Mains fail, low battery, bypass, fault, fan fail (alarm card for UPS) Comms Connection RS232 (as per UPS) Input Volts 110VAC or 240VAC, 50Hz, 1 phase (as per UPS) Output Volts 110VAC or 240VAC, 50Hz, 1 phase (as per UPS) Connection Hardwired top/bottom gland plate. As a manufacturer, we are flexible in our approach and so by working with the customer we can provide a solution to meet almost any application. We also manufacture Floor Standing IP54 Enclosures suitable for high power applications.