Company details for:

Automated Cable Solutions Ltd

Submit press release

(1)

Unit 5,
Home Farm business units,
Riverside,
Dartford,
Kent,
DA4 0AE,
United Kingdom

Quick Links:

Products

Cut & Strip Machine - Carpenter Model 970

The New Carpenter Model 970 Cut & Strip Machine

The Model 970 cut & strip machine can process a multitude of different wires and cables from 0.032-10mm2 or 32-8 AWG cross section. With a new user friendly control panel, Fully programmable for full or partial strip on both ends, with a 999 memory program storage, USB connection, cable processing library, password Protect, multistrip function etc, It comes complete with a full set of guide tubes up to 8.0mm diameter and UK power lead.

Options:

Radius Blades Available
For cables up to 10.50mm diameter, Additional 9, 10, 11mm diameter guides tube can be purchased.
Connection to the Model 59 prefeeder

Nuova Gamma T20SC Stripper Crimper

Nuova Gamma T20SC stripper crimper
This stripper crimper is available in a two ton version crimping press.
It accepts most crimping applicators with the 3 clip fixing base plate,
Nuova Gamma, AMP, Tyco, Molex, Mecal, OTG, Formgate, Schleuniger etc
Within the software of the machine it has 4 set or production modes
1/Strip only
2/Crimp only (with foot pedal)
3/Strip & crimp
4/Transfer crimp position

CM25-1 Fully Guarded System

This machine has the option of setting the machine to be used with or without the safety guard.
It has a 6mm stroke closure without the guard and a 14mm stroke closure with the safety guard.

CM25-6 No Guarding System

This option has no safety guard and only has a 6mm stroke, to allow the close access to the crimping area.

PP3 Stripper Crimper

This is the New PP3+ Stripper Crimper.
Available as left or right hand versions and in the new blue colour, available with the new air feed applicators, all old existing PP3 tools will also fit this machine, exclusive from Automated Cable Solutions Ltd.

PP3+ Pneumatic Crimping Tools

These are now available in the new air feed option:
Left side feed
Right side feed
Rear feed
The old mechanical style tools are also available and also fit the new style PP3+ machine

EKO60EM

Electric Loose Piece Crimping Machine.
Supplied with 10 die sets for various terminals

EKO06M

Pneumatic Loose Piece Crimping Machine.
Supplied with 1off red, blue, yellow die set for insulated terminals

EKO50L

Pneumatic Loose Piece Crimping Machine.

Supplied with 10 die sets for various hexagon and indent terminals

JAM CPR-ZERO WP - Cut Strip and Terminate Machine

JAM CPR-ZERO WP - Cut Strip and Soldering Machine

PTH50 Manual Pull Tester

Touch Screen unit, with cable and terminal clamps, with the facility to download the results to PC for printing.

ACS Electronic Cutting Machine

This new MCCM100 electric cutting machine is able to cut a wide range of materials, with material diameters up to 8.5mm and a cutting width of 100mm.

Digital Microscope

THIS COMPACT UNIT IS PERFECT FOR VIEWING A MULTITUDE OF PRODUCTS ESPECIALLY STRIPPED CABLES, CRIMPED TERMINALS AND PCB'S.

KEYTAST SPC Data Transfer Unit

Allows the data to be sent to PC and viewed through Microsoft Excel.

Crimp Force Monitoring

The CFM1000 Crimp force monitoring unit is now available, with the option of fitting these units to most crimping presses on the market.
Nuova Gamma
Mecal
Molex
Schleuniger
Wirmec

Model 54A Bench Mount Dereeler

This is designed to assist in the dereeling of cable or wire reels for entrance into a measure & cut or Measure, cut & strip machine.
This benchtop Dereeler will accommodate a large variety of cable drum reel sizes, and is easily clamped to a bench or counter top. The material spool is positioned in place and engaged on both sides by large cones, this enables the reels to rotate freely into the cable cutting and stripping machines.

Model 56A Bench Top Prefeeder

This is a powerful Bench Top on demand prefeed / Dereeler designed to provide your electric bench top wire processing machine with a constant and undisturbed supply of wire from either a wire spool or Barrel.
This unit features a powerful belt feed material transport, infinitely adjustable speed control, and a pulley accumulation system that virtually eliminates any material overrun.
The Model 56A comes complete with its own Dereeler Stand, making it an excellent compliment for electric bench top wire processing equipment.

Model 58B Floor Standing Prefeeder

This is designed to assist large cable reels in the dereeling of the material before entering a bench top cut and strip machine.
This prefeeder has a powerful belt feed wire transport system, which eliminates the strain of pulling material from heavy spools, thus improving the accuracy of your cut and strip equipment.
This unit comes standard with an accumulator weight kit to aid in the delivery of large diameter or solid core cables.

ZX205 Cutting Stripping & Terminate Machine

This new crimp to crimp - 4 station machine can offer Servo presses up to 6mmsq, Conveyor & CFM as standard, with sealing and soldering as options, it will accept all standard 40mm stroke applicators, so no additional tooling required if you already have your Mini Applicators on stock.

Carpenter Model 78A Wire Stripping Machine

Carpenter's new Model 78A Pneumatic Wire Stripper provides a fast and accurate way to strip a broad range of Wires and Cables. This compact wire stripper features calibrated adjustments for Wire Diameter, Strip Length and Partial strip, making operation and change-over Simple and Fast. Using the flexibility of our unique V Stripping Blades the Model 78A can easily strip wires ranging from 10 to 30 AWG / 0.05 - 5.26mm.

Carpenter Model 70D-S Rotary Wire Stripping Machine

The Carpenter Model 70D Single Swing Blade Rotary Wire Stripper comes equipped with a Single Blade Face Plate designed for end stripping a wide range of insulation types. The machine’s rotary blade action provides a clean square strip that leaves the inner conductor strands neatly twisted.With adjustable blade depth, strip length and interchangeable wire guides, changeover from one wire to another is simple. The Model 70D Single Blade Rotary Wire Stripper is a production machine that offers optimum efficiency at low cost

Carpenter Model 70D-T Rotary Wire Stripping Machine

The Carpenter Model 70D Twin Swing Blade Rotary Wire Stripper comes equipped with a Twin Blade Face Plate which is designed to strip difficult insulation such as thin walled, Shielded, Coax, Teflon, Kynar etc..
The machine’s face plate & rotary blade action provides a clean square strip that leaves the inner conductor strands neatly twisted, with adjustable blade depth, strip length and interchangeable wire guides, changeover from one wire to another is simple.
The Model 70D Twin Blade Rotary Wire Stripper is a production machine that offers optimum efficiency at low cost

Carpenter Model 77E Jacket Stripping Machine

The Model 77E Pneumatic Cable Stripper can easily strip difficult extruded type insulations such as those found on High Voltage, Welding, Multi-Conductor and Battery Cables. This unit utilizes a Scale Style Strip Length Adjustment, plus a Micrometer Control for Blade Depth settings.

Carpenter Model 31 Cable & Tubing Cutter

The New Model 31 Manual Lever Cutter is a powerful and versatile bench mount unit designed to quickly and accurately cut to length a wide range of difficult to cut materials. This unit can easily handle Round Material up to 1.250” in diameter and Flat Material up to 4.00” in width. With heavy duty construction and our unique blade design even the hardest to cut materials can be easily processed with clean accurate results. The Model 31 is equipped with a 3 position adjustable handle giving this unit great flexibility, and ease of operation.

About us

Automated Cable Solutions are UK Distributors for Carpenter Manufacturing. Established in 2008, we aim to suit all of your cable preparation requirements by offering a top quality range of Cutting and Stripping Machines, Crimping presses and Mini Applictators.

For over ten years, we as a company have supplied high quality products and solutions to the cable processing equipment industry, working with a number of clients to ensure that they receive outstanding service from our dedicated team of specialists, who take great pride in their ability to discover new and innovative solutions that benefit commercial and industrial applications.

Here at Automated Cable Solutions, we offer a wide range of products that are flexible and reliable at all times. Some of these include;

Cable Coiling - END 500 Single Cable Coiler

Cable Cutting Machines - Designed to measure and provide clean, squar and accurate cuts to length.

Cable Prefeeders - designed to assist in the dereeling of cable or wire reels and provide a constant supply of wire.

Cable Stackers - Semi-Passive Stacker for connection to wire processing machine.

Coax Stripping Machines - Easily strips off coax or triaxial cable.

Crimping Press Machines - The crimping presses can be used for loose pieces and chain link or banolier terminals.

Cut and Strip Machines - These machines incorporate the use of High Torque Stepper Motors, a Precision Ball Screw Blade Mechanism, and User Friendly Electronic Control.

Hand Tools - full range of Knipex or Rennsteig hand tools.

Jacket Stripping Machines - Easily strips off difficult extruded type insulations found on High Voltage, Welding, Multi-Conductor and Battery Cables.

Mini Applicators - Mini Applicators can be designed for almost any chain link or banolier ternimal on the market.

Pull Testers (Cable & Wire) - Automated Cable Solutions supply Wire and Crimp pull testers up to 20K Newtons for tensile testing cable and wire being pulled from all terminal crimp types.

Magnet Wire Stripping Machines - designed to efficiently strip miniature coils and fine magnet wire, strip Film Type Insulation from large gauge wire leaving a clean strip with a square shoulder.