Flowstar (UK) Ltd

Sizes:1/2" to 2"

Connections:BSP Male Inlet x BSP Female Outlet
Materials:Bronze body, Chrome Alloy spring
Disk:Stainless, Aflas or EPDM
Joints & Seals:

Medium:Air, Vapours, Gases, Liquids and Steam (depending upon the model)

Set Pressure:0.35 to 24 Barg (depending upon the size)
Temperature:-20 to +224 degC Max (depending upon the disk)

Sizes:1/2" x 3/4" to 2" x 3"
Connections:BSP Female Inlet x BSP Female Outlet
Materials:Bronze body, Chrome Vanadium spring
Disc:Stainless, Aflas or EPDM
Joints & Seals:

Medium:Air, Vapours, Gases, Liquids and Steam
Set Pressure:0.35 to 32 Barg (depending upon the size)
Temperature:-29 to +220 degC Max (depending upon the disk)

This spring operated liquid relief valve has a cartridge type assembly which can be withdrawn from the body without disturbing the spring setting and hence relieving pressure. This allows the seating surfaces to be cleaned without the need to reset the valve. Typically for use on positive displacement pumps, for relief or bypass duties. The spring cartridge assembly can be supplied separately for use as an integral pump bypass relief valve. The spindle is fitted with an ‘O’ ring to protect the spring particularly on corrosive duties.

Sizes:15NB, 20NB, 25NB, 32NB, 40NB, 50NB, 65NB, 80NB
Connections:Male BSP Inlet x Female BSP Outlet
Materials:Body: Gunmetal or Stainless Steel
Disk:Metal to Metal (all sizes) or Viton (15NB to 50NB)
Joints & Seals:'O'-Rings: Nitrile
Medium:Compressed Air, Gases, Water, Oil and Steam
Set Pressure:0.35 to 24 Barg for sizes 15NB upto 50NB, and 0.35 to 13.79 Barg for 65NB to 80NB
Temperature:200 degC Max

Sizes:1/2" (DN15), 3/4" (DN20), 1" (DN25), 1.1/4" (DN32), 1.1/2" (DN40), 2" (DN50)
Connections:Male BSPT Inlet x Open Discharge Outlet
Materials:Gunmetal or Stainless Steel
Disk:

Joints & Seals:

Medium:Liquids, gases and steam
Set Pressure:Is factory set to open at a vacuum pressure of 50mBar
Temperature:195 degC Max

Sizes:1/2", 3/4", 1", 1.1/4", 1.1/2", 2"
Connections:BSPP male, cone and nut to DIN 11851, flanged DIN or ANSI
Materials:Stainless Steel (90.2)
Disk:Viton
Joints & Seals:FPM
Medium:Non-toxic Steam and Gases
Set Pressure:Vacuum: -0.01 to -0.9 BarG, Set Pressure: 0.1 to 3 BarG
Temperature:-60 to +150degC (90.2)

Design:
Notes:
The Brass (90.3) version of this valve is no longer available.

Sizes:15mm to 150mm
Connections:Screwed BSPP Female (upto 50mm), Screwed NPT Female (upto 50mm) or Flanged (All Sizes)
Materials:Cast Iron, Carbon Steel, Bronze & Stainless Steel
Disc:
Joints & Seals:
Medium:Steam, Water, Air & Gases
Inlet Pressure (Max):35 Barg (Cold)
Outlet Pressure Range:0.3 to 12.5 Barg (Standard Top) or 25 Barg (High Pressure Top)
Cv Range:
Temperature:220 degC (Max
Approvals:
Notes:(a) Pressure Control: plus or minus 1% (b) Full bore and Low Flow Trims (c) Minimum Pressure Drop: 1.5 Barg

Contains a diaphragm, piston rings, a pilot valve assembly, the main valve and seat, a main valve spring and a set of joints.

Sizes:2.1/2", 3", 4"
Connections:Tri-Clamp (ASME BPE or DIN 32676), Male Union (DIN 11851 / 11864-1), Varivent flange (DIN 11864-2), Flanged PN16 or ANSI 150 R/F or Screwed to ISO 228.
Materials:Stainless Steel 316L or 304
Disk:EPDM, PTFE (FDA), AF100 or viton
Joints & Seals:Diaphragm: EPDM, PTFE (FDA), AF100 or viton
Medium:Steam, Gases and Liquids
Set Pressure Range:0.2 to 13.2 Barg

Valpres 76 series ISO Direct Mount split body 2 piece full bore ball valve. With a Stainless Steel ball and stem, P.T.F.E. seats and P.T.F.E. / Graphoil / FKM seals. Antistatic and Firesafe to BS6755 Part 2, API spec. 6FA and ISO 10497. ATEX II 2GD T3 approved. End connections flanged and drilled PN16 / PN40 / ANSI 150.

Valbia 85 series electric actuator. With a Techno-polymer housing. IP67 protection. With manual override and visual position indication. 2 x limit switches fitted for remote open and closed position indication. With an electronic torque limiter. With an internal anti-condensation heater. With PG11 electrical connections.

Valbia 82 series pneumatic actuator. Sized based on a minimum pilot air supply pressure of 5.5 Bar g. Rack and pinion design, Hard Anodised Aluminium body, Blue coated end caps, visual position indication. With bi-directional open/close travel stops. Suitable for a maximum air supply pressure of 8 Bar g. ATEX II 2GD T6 approved.

Sizes:1/2" to 2"
Connections:Female BSPP x Tri-Clamp
Materials:316L Stainless Steel
Design:Will mate-Up with ferrules to BS4825, ISO & DN32676 standards
Notes:Other sizes and thread types available on request

The Floguard range of CAT 3 double check valves protects against the risk of backflow and back-siphonage contaminations to Category 3 / Class 3 contamination risks. They incorporate a test point for monitoring the correct functioning of the downstream check valve.

We have an interesting article relating to Backflow Prevention in the Technical section on our website.

Sizes:
DN15, DN20, DN25, DN40, DN50, DN65, DN80, DN100
Connections:Wafer
Materials:Body & Plates: Bronze, Stainless Steel, Hastelloy
Seat:Metal, Viton or PTFE
Working Pressure:Upto 100 Barg (depending upon the model)
Temperature:Upto 593 degC (depending upon the materials)
Design:Complies fully with BS7438 and EN 558.2 face to face
Notes:Fully UK manufactured product

The Valfonta Model 248 Steam / Water Jet Ejector is used for mixing liquid and solid products with a liquid (normally water) or steam. Excellent reliability as there arent any moving parts.

Typical applications include the manufacture of chemical products, paper, soap, tanning-works, beer and alcohol, sugars, spining mills, dye-works, bleaching, mines and bilge pumps on ships.

These Flanged Liquid Turbine Flow Meters can be used with liquids such as water, light oils, solvents and low viscosity chemicals.
Sizes:1/2" to 8"
Connections:ANSI or PN flanged
Pressures:Max subject to the flange rating / 0.5 Barg pressure drop at max flow
Flow Range:1 to 18000 Litres / Minute (depending upon the size)
Materials:Stainless Steel Rotor & Body (see datasheet)
Accuracy:+/- 0.5% Linearity / +/- 0.1% Repeatability
Temperature:Standard -30 degC to 110 degC / High Temp -30 degC to 232 degC
Notes:ATEX approved. Individual calibration certificates

Sizes:1", 2", 3", 4", 6", 8"
Connections:Flanged PN or ANSI
Materials:Aluminium cast alloy
Filtration Efficiency:99.9% of particle size > 2 μm (Others available)
Joints & Seals:

Medium:Gas
Maximum Operating Pressure:16 Barg
Temperature:-20 degC to +70 degC (-40 degC available)
Approvals:

Notes:DIN 3386, DVGW Code of Practice G 498 and DIN 30690-1

Sizes:1/2" (DN15), 3/4" (DN20), 1" (DN25), 1.1/4" (DN32), 1.1/2" (DN40), 2" (DN50)
Connections:Female BSP Inlet x Female BSP Outlet
Materials:Red Bronze Body / Bonnet: Brass upto DN32 then from DN40 Cast Iron
Disk:
Joints & Seals:Diaphragm: NBR, Seals: NBR
Medium:Seawater
Inlet Pressure (Max):25 Barg
Outlet Pressure Range:1.5 to 6 Barg
Cv Range:
Temperature:75 degC Max
Approvals:PED 97/23/CE category I
Notes:(a) Built in gauge ports (b) Minimum pressure drop between inlet and outlet: 1 Barg

Aluminium Bronze Ball Valves from several leading manufacturers. Please contact us with your requirements.

The Budenberg 269 BFMIRA Patent Can Piercing Vacuum Gauge is a high specification vacuum gauge specifically designed for the estimation of the intensity of vacuum in a food can. Using an ordinary vacuum gauge fitted with a piercer is usually very inaccurate and does not allow for the dilution of the head space vacuum by entry of air at atmospheric pressure from the gauge. Ordinary vacuum gauges therefore always give a lower reading than the vacuum which existed in the head space before the can was pierced, and if the head space is small the error is compounded. This gauge was developed by the British Food Manufacturing Industries Research Association and it overcomes the disabilities in an ingenious manner. A circular calculator can be provided with the instrument to carry out the calculations in units of ins Hg, cm Hg and Kpa. We have an interesting article relating to Pressure Gauge Selection in the Technical section on this website.

Overflow stop valves are a mechanical regulating system. The damping system prevents chattering at low flow rates. Suitable for installation as relief valves in the refrigerant cycles of industrial refrigerating plants.

Sizes:3/4"
Connections:Flanged & Butt Weld
Materials:Steel or Stainless Steel
Medium:Glycol-based cold brine refrigerant EN 378 p. 1, e.g. NH3, R134a, R290 (propane), R507, blends with refrigerator oil, neutral, gas and liquid media, glycol-based cold brine
Set Pressure:2 to 8 Barg
Temperature:-60 to +150 degC Max
Design:
Notes:

Excess flow valves have been designed to prevent pressure accumulation in the space between the rupture disk discharge and the second safety device. Since rupture discs are differential pressure devices, avoiding pressure accumulation is essential to ensure correct disc opening at the desired bursting point. Excess flow valves are usually used when rupture discs are used together with a safety valve or when installed on multiple rupture discs in series. Excess flow valves close when exposed to the rupture disc discharge flow. Excess flow valves are available in ¼” or ½” versions and can be supplied with T connectors, nipples and pressure gauges upon request. All Rupture Discs accessories are made of stainless steel.

A low cost, ‘entry level’ sight flow indicator with either a high sensitivity spinner operating from 0.7 l/m (water). The nitrile seals and nylon spinner give excellent chemical resistance which is further enhanced in the stainless steel version by the use of borosilicate glass as standard. These compact sight flow indicators are used extensively in plant protection applications to show coolant or lubrication flow to pumps, compressors, and engines. As an added advantage the series 400’s can be used in any orientation.
Rhodes Sight Glasses are fully UK manufactured with castings from the UK, unlike many of the competitors using components from the far east.

The G4 piloted operated pressure reducing valve provides extremely accurate levels of pressure regulation for steam, air, and industrial gas applications. The highly sensitive pilot valve provides a constant outlet pressure, irrespective of erratic inlet pressure or system demand.

Features

Low cost maintenance - Lightweight design provides easy handling whilst interchangeable components ensure standard parts are easily replaced.
Testing / Quality - All products are factory tested and fully certified.
Self-Draining - All products are designed to ensure that condensate drains away from all seating areas.
Low leakage - Standard seating design ensures minimum leakage of less than 1 scfh at 90% of set pressure.
Internal Parts - Internal parts are stainless steel as standard. Non-standard materials available upon request.
Connections - All valves are supplied with full form flanges to meet individual requirements. Other connections are available upon request.
Non Standard Applications - There are numerous options available for special applications. Exotic materials such as Hastelloy, Monel and various plastics can be offered to suit the most hazardous of environments. Special coatings can also be applied for extreme service. For low temperature duties, internal parts can be PTFE coated to prevent seizure.

Sizes:1/4", 3/8", 1/2"
Connections:Tri-Clamp (ASME BPE or DIN 32676), Male Union (DIN 11851 / 11864-1), Varivent flange (DIN 11864-2), Flanged PN16 or ANSI 150 R/F or Screwed to ISO 228.
Materials:Stainless Steel 316L or 304
Disk:EPDM, PTFE (FDA), AF100 or viton
Joints & Seals:Diaphragm: EPDM, PTFE (FDA), AF100 or viton
Medium:Steam, Gases and Liquids
Set Pressure Range:0.004 to 0.98 Barg