Company details for:
GPS Perimeter Systems
(0)
0160...
14 Low Farm Place,
Moulton Park Industrial Estate,
Northampton,
Northamptonshire,
NN3 6HY,
United Kingdom
Quick Links:
Products / Services
DPS - Extremely Stable, High Security System
DPS is a dual technology system that uses a combination of GPS/PPS and RFC detection systems.
This creates an extremely stable, high security system, suitable for the most demanding applications.
This creates an extremely stable, high security system, suitable for the most demanding applications.
GPS Plus - Discreet Perimeter Protection
GPS Plus is a buried line differential pressure system suitable for the discreet perimeter protection of commercial, domestic, industrial, military or other high risk areas.
PPS - An Evolution of the GPS Buried Tube System
Buried Point ID Perimeter System.
PPS (Positional Perimeter System) is an evolution of the traditional GPS buried tube system, based on the monitoring of pressure differentials.
PPS (Positional Perimeter System) is an evolution of the traditional GPS buried tube system, based on the monitoring of pressure differentials.
RFC Chain - Sensitive to Movement
The RFC (Radio Frequency Cables) uses two buried cables (one a transmitter, the other a receiver) to create an electromagnetic field that is sensitive to movement within the protected area.
CPS Plus - Perimeter Intruder Detection
The CPS Plus is a passive, perimeter intruder detection system, suitable for both internal and external applications.
It is normally used on existing, external fences such as chain link and welded mesh. It can also be used on top of, or in the structure of walls (wood, brick, stone etc.).
It is normally used on existing, external fences such as chain link and welded mesh. It can also be used on top of, or in the structure of walls (wood, brick, stone etc.).
Miles − Fibre Optic Detection System
The detection system is based on a single mode fibre optic cable that is made sensitive to various disturbances created during an attack on a particular structure. It has the highest level of detection while at the same time has a very low false alarm rate. It is completely immune to electromagnetic interference generated by fast transients of current /voltage or atmospheric phenomena (lightning).
SIOUX - Perimeter Intrusion Detection System
The Sioux-Master and Sioux-Slave sensors are interconnected using pre-assembled cables and connectors. The various lengths of these cables allow different spacing between sensors for different types of fence structure.
Groups of Master sensors with associated slaves (6 per Master) are fitted to the fence and connected as a serial chain back to a Control Unit, which can monitor two separate chains (or Lines) with up to 10 Master sensors and associated Slave sensors per line.
Groups of Master sensors with associated slaves (6 per Master) are fitted to the fence and connected as a serial chain back to a Control Unit, which can monitor two separate chains (or Lines) with up to 10 Master sensors and associated Slave sensors per line.
SNAKE − Fibre Optic Cable Detection System
SNAKE is a perimeter protection system that uses fibre optic cable as the detection medium, suitable for internal and external applications.
It uses opto-phonic technology to detect all typical attempts to climb, cut or break through a fence and for internal applications it can indicate attempts to break through or penetrate a wall.
The advantages that fibre optic technology bring to fence mounted perimeter detection systems are, among many, accurate detection, the ability to cover long distances without the need for intermediate power supplies and in particular the complete immunity to high frequency interference from high voltage lines or atmospheric disturbances.
It uses opto-phonic technology to detect all typical attempts to climb, cut or break through a fence and for internal applications it can indicate attempts to break through or penetrate a wall.
The advantages that fibre optic technology bring to fence mounted perimeter detection systems are, among many, accurate detection, the ability to cover long distances without the need for intermediate power supplies and in particular the complete immunity to high frequency interference from high voltage lines or atmospheric disturbances.
ERMO482X-PRO - Digital Microwave Detector
ERMO482X Pro − Digital Microwave, up to 500m range.
The ERMO482X Pro is a bi-static, digital microwave detector for high security, external applications, now with IP PoE capability.
It comprises a transmitter and receiver which, when mounted facing each other, create a protection zone, the dimensions of which vary according to the chosen antenna, the distance between the two units and the selected system sensitivity.
The ERMO482X Pro is a bi-static, digital microwave detector for high security, external applications, now with IP PoE capability.
It comprises a transmitter and receiver which, when mounted facing each other, create a protection zone, the dimensions of which vary according to the chosen antenna, the distance between the two units and the selected system sensitivity.
ERMO / CORAL - Microwave Barrier Systems
These barriers generate a microwave frequency beam that passes between a transmitter and a receiver.
When the receiver detects any interference in the beam an alarm output is given. This output can be processed in analogue form or in digital form.
When the receiver detects any interference in the beam an alarm output is given. This output can be processed in analogue form or in digital form.
MMD - Rapid Deployment Microwave Barrier
The battery boxes can provide power for two heads at the same time, where multiple heads are needed to provide the level of protection required. Each box has a built in battery charger so that the internal battery can be re-charged when convenient.
The microwave receiver head is connected to a special type of battery box, called the MMD-Master, which includes a radio transmitter. This radio transmitter sends alarm and status information to a control unit, MMD-CU, fitted with a compatible radio receiver. The radio receiver can accept signals from remote units over a distance of about 1km in open areas.
The microwave receiver head is connected to a special type of battery box, called the MMD-Master, which includes a radio transmitter. This radio transmitter sends alarm and status information to a control unit, MMD-CU, fitted with a compatible radio receiver. The radio receiver can accept signals from remote units over a distance of about 1km in open areas.
Murena - Doppler Microwave
12/24m Doppler Microwave with Unique Range Cut-off.
Murena is a volumetric microwave sensor, using the Doppler effect and digital signal processing, for external protection, now with IP PoE capability.
This unit has a very high signal/noise ratio, especially for very low frequencies, which relate to slow movements across the protection field. In this way there is a drastic reduction in the sensitivity differences between longitudinal movement and transverse movements through the protection field, characteristic in most Doppler effect sensors.
The on-board microprocessor, using appropriate algorithms can measure the distance and the mass of the object moving in the detection field, analysing all the received data using “Fuzzy” logic.
Murena is a volumetric microwave sensor, using the Doppler effect and digital signal processing, for external protection, now with IP PoE capability.
This unit has a very high signal/noise ratio, especially for very low frequencies, which relate to slow movements across the protection field. In this way there is a drastic reduction in the sensitivity differences between longitudinal movement and transverse movements through the protection field, characteristic in most Doppler effect sensors.
The on-board microprocessor, using appropriate algorithms can measure the distance and the mass of the object moving in the detection field, analysing all the received data using “Fuzzy” logic.
MICRO-RAY - Detection Barrier
MICRO-RAY is a detection barrier with linear microwave rays developed by CIAS laboratories, based on a deep knowledge of microwave technology and signal analysis, coupled with long experience of real-world perimeter requirements.
The idea was born from the need for an alternative to infrared rays, which are normally used to protect very narrow corridors, but which by their nature have many limits that can negatively affect performance.
Infrared beams are especially vulnerable to climatic conditions such as temperature, glare, solar reflections, fog, and need frequent maintenance such as cleaning of the cover.
The idea was born from the need for an alternative to infrared rays, which are normally used to protect very narrow corridors, but which by their nature have many limits that can negatively affect performance.
Infrared beams are especially vulnerable to climatic conditions such as temperature, glare, solar reflections, fog, and need frequent maintenance such as cleaning of the cover.
iB-Rack - Universal Cabling System
The IB-System-R is a universal cabling system able to collect all the alarm and maintenance signals from the field and to bring them back to any central control system that can accept on/off signals as an input.
SCS - Security Management System
Fully Integrated Security Management System
The SCS (Supervision and Control System) is for the supervision and control of complete systems, using an extremely simple interface with the most advanced data presentation technology.
The SCS system integrates the management of:
Intruder control units
Fire control units
Access control systems
Video surveillance and recording systems
Building management systems
Perimeter Security systems
The SCS (Supervision and Control System) is for the supervision and control of complete systems, using an extremely simple interface with the most advanced data presentation technology.
The SCS system integrates the management of:
Intruder control units
Fire control units
Access control systems
Video surveillance and recording systems
Building management systems
Perimeter Security systems
About us
GPS Perimeter Systems Ltd are experienced specialists in perimeter intrusion detection systems, including buried detection, fence security, and microwave barriers.
For over 40 years’ we have made it our mission to find the right product to suit your needs, offer impartial advice and liaise with the only the best organisations to help with installation and on-going maintenance.
GPS Perimeter Systems work closely with leading manufacturers GPS Standard spa and Cias Elettronicia. Customers can therefore shop with confidence when purchasing their system from us.
Buried Detection Systems
- Invisible once installed
- Ideal for irregular shaped sites
- Don’t require a wall or fence
- Work under many surfaces including grass, gravel, asphalt and paving
- Follow the shape and contours of irregular boundaries
Fence Systems − Fence Mounted & Taut Wire
- Easily installed and discreet
- Follow the shape and contours of irregular fence lines
- Usually require a specific physical barrier such as a wall or fence
- Taut wire systems form their own physical barrier
- Work on many types of structures including chain link & welded mesh
Free Standing − Microwave Detection System
- Cost effective security over long straight perimeters
- Used in ‘line of sight’ applications
- Do not require a specific barrier
- Work in various weather conditions
- Ideal for the protection of roofs and walls
- Suit different applications such as microwave & infrared barriers
Optical Fibre Systems
- Vibration sensitive detection systems using special optical fibre cables
- Can be installed on fences, pipelines or buried
- Can use newly installed or existing fibres for cost effective protection for long perimeters and pipes
Integrated Alarm Data Collection
- For access to the sensor data from a central point without the need to go to each individual sensor
- Ideal as a central interface to third party monitoring systems such as CCTV surveillance equipment
Images
