Company details for:

Gromtec Europe

Submit press release

(0)

020 ...

10A, Ballywaltrim Business Park,
Bray,
Wicklow,
Dublin,
Leinster,
A98 DR64,
Ireland

Quick Links:

Products / Services

GTAG7-SP Split 2 Part Air-Guard

GTAG7-SP 2 part brush and gasket sealed cable grommet provides industry leading sealing performance and safety. The innovative removable brush cartridge allows visual access to the floor void while providing a protective frame to pass cables through.

GTAG10 AIr-Guard Retro Fit

The GTAG10 grommet is a 2 piece unit designed to be installed over an existing cabled or piped openings up to 127mm in diameter. The unit is made from V0 flame retardant ABS resin and each half features a curved brush and lower gasket layer. When installed the centripetal bristle design and gasket combine to form a tight air seal. To facilitate installation in addition to fixing screws the back of the ABS outer rim is fitted with a heavy duty peel and stick adhesive foam. The GTAG10 is easy to install and seals unsightly openings forming a seal around cables eliminating air loss or drafts.

GTAG1 Intergral Air-Guard

Sealing cabling openings in a raised floor is proven to improve air flow performance and reduce air conditioning running costs. The award winning GTAG1 Air-Guard features an overlapping brush system with 2 opposing bristle lengths which combine to provide an effective air seal around cables passing through the protective sleeve. The unit is relatively narrow which facilitiates the use of shorter bristles which maintain their horizontal alignment and will not wilt over time. Note, long and heavy bristles (over 125mm ) are prone to wilting over time thereby creating an air gap opening in the grommet. The GTAG1 also features a removable edge section. This can be useful if the unit is installed at the edge of a floor panel. 2 units can also be installed face to face to form a larger cable way.

GT002RB − 76mm

The GT002RB is designed with a built in double skinned rubber gasket to provide an air tight seal around cables which pass through the protective grommet.
The GT002RB cable grommet is designed to provide a simple, effective and economical solution to sealing small cable openings in data centre raised floors and cabinets. Made from flame retardant materials the GT001RB will form a tight seal around cables and cable conduit. This is especially important in installations where the void under the raised floor is designed for the delivery of cooling conditioned air. The gasket also prevents debris from entering the floor void and the grommet sleeve protects cables from the possible sharp edges of the cut metal panel surface. Other areas of use include ceilings, furniture and wall systems.

GTV33 Edge Grommet − 75mm Edge Cut

The GTV33 grommet is designed to fit into a 75mm x 75mm V shaped edge of floor panel cut out. Such a cut out allows for the removal of the floor panel without having to disconnect cables.

TRIAD ICE Chamfer Air Grille

Triad are acknowledged as the leading manufacturer of High Plume air grilles which provide controlled cooled air in a 360 degee pattern over the full height of the server cabinet. Triad panels with their “usable air dispersion” design create a virtual “Air Ceiling” that does not require pressurization, unlike fully roofed cold aisle constructions. Using air in a proper “dispersion” pattern creates a stratification boundary layer at around 2.1 metres (7 feet) that prevents hot air from re-entry and keeps cold air from disrupting the hot air return.

GTAD8 Circular Air Grille

Made from high impact flame retardant material the Air-Stream Circular Grille delivers controllable conditioned air in an efficient air plume. The grille is virtually maintenance free and the three locking clamps hold the grill firmly in place yet allow for its easy removal if required. The Air-Stream’s integrated air damper is simple to adjust for the optimum ambient setting.

GT065GA Floor Grommet − 169mm

GT044 Air-Block − 100mm x 100mm Cut Out

The GT044 cable grommet is designed as a small, neat and strong cable grommet solution. The 2 part grommet features a gasket seal which forms a tight air seal around cables and prevents dirt from entering the floor void. The grommet requires a simple 100mm square cut out. Its 2 part design with no outer housing means the unit could be installed in the edge of a floor panel without cables being “trapped” within the grommet or floor panel. This allows the panel to be removed without necessarily having to unplug cables. The built in locking arms hold the grommet firmly in position but also allow it to be easily removed when required.

GT036 Air-Block®

The GT036 is a very strong and neat cable grommet, designed to air seal a cable opening with up to 5no. 25mm diameter cables passing through it.
To install and achieve a great air seal:
Cut a floor opening 110mm x 200mm
Open grommet and “Snap” together around the cables
Position unit into the floor cut out opening
Engage the quick action clamping arms and that’s it!

Air-Shield Blanking System

Tear and Fit 10u blanking panel sheets
Made from light weight flame retardant material
Anti-Static treated
Easy to shape around odd sizes
Low cost
Push/Pull grip fasteners − 200 supplied per box of 500u
An air and dirt seal foam gasket in fitted to the cable mouth
Cable opening is adjustable to suit cable size
Supplied in handy box size of 500u

Printed Blanking Panel

Attractive patterned printed blanking panels.
Light in weigth
Easy to adapt 10 u sheets
Flame Retardant
Anti Static
Forms effective blanking shield − eliminate bypass air
Low cost − fast return on investment
Re-usable
Recyclable
200 clips with every 500u pack
Attractive printed geometric print
CUSTOM Single colour Print Options − Logos, Branding, etc.
White blanking panels also available

GTAF400 Air-BloXX Kit

Sealing large openings in a computer room raised floor has always been a bit of a problem. The Air-BloXX Kit is designed to seal an opening up to 400mm x 400mm.( Larger Kits are available) The special Class O Fire rated foam is “kiss cut” into 25mm square sections which allows the material to be easily shaping around cable penetrations.

Air-Skirt

The Air-Skirt is an easy to install brush seal. The h shaded profile carrier is fitted with peel and stick double sided tape and 2/3 screw fixing holes. A 900mm long brush section with a dense 75mm long bristles is fitted into the aluminium profile. ( Custom profile lengths and bristle lengths can be made to order ) The Air-Skirt is designed to seal the air gap at the base of a computer rack. The profile can be supplied in a brushed aluminium or a painted finish either black or white. For narrower cabinets the profile can be cut or we can custom make parts to meet your exact requirements.

GTAG3RD Reducer Plate

Does your data hall have large unsealed cut outs in floor panels and only a relatively small number of cables passing through the opening?
The resulting open space greatly reduces the cooling efficiency of your data centre. The GTAG3RD reducer plate is designed to work with the GTAG3 Air-Guard,® Brushed Grommet. Quickly retro seal large floor openings, even when already cabled, and also protect cables from sharp panel edges as the pass through the floor panel. Just peel and stick the reducer plate to the raised floor surface. The GTAG3 Air-Guard is then fitted to the surface of the reducer to form a brushed air seal around the cables.

SOLC5 Stainless Steel Lid Grommet

Based on the GTLC5 cable grommet, the SOLC5 replaces the plastic movable top lid with a heavy duty brushed stainless steel lid.

GT-AL5 Aluminium Grommet

Stainless Steel IP66 Floor outlet

The outlet comprises of a top section, back box and power socket.
Standard Stainless Top sections −
KSE0/23/72 − no socket enclosed, KSE4/23/72 with 13amp socket, KSE5/23/72 with 5amp socket
Back Boxes −
KGE/170/23 Screed Back Box, KGETF/170/23 Raised floor back box
When not in use the outlet sits flush with the surrounding floor finish.
Typical installation areas − Airports, Car Showrooms, Department Stores, Shopping Centre Concourse Areas, Decking and Terrace Areas.

Brass IP Single Gang Floor Outlet

Typical installation areas include Airports, Car Showrooms, Department Stores, Shopping Centre Concourse Areas, Decking and Terrace Areas.

Brass IP Rated Outlet with Security Lid

IP66 watertight single gang socket outlet with security lid lock mechanism
Typical installation areas include − Airports, Car Showrooms, Shopping Centres, Super Markets, Concourse Areas and Outdoor Terrace/Deck areas.

Chameleon

A bright design in more ways than one.
The new eLink™ Chameleon Above Desk Unit (ADU) is a breakthrough in power and networking aesthetics. It comes supplied as standard with 2 x UK BS1363 power outlets each protected with 5A CBE combined switch and circuit breakers, 2 x high output USB charging ports and two accessory ports in the legs which allow the insertion of a keystone RJ45 Cat6, HDMI or data USB. Power in-feed is 800mm black PVC cable to GST18/3 male plug. Switch to eLink™ Chameleon and feel the power.

OMEGA Linear Desk Top Module

OMEGA − Flush Mounted Power and Data Module
This no nonsense flush mounted desk top unit provides immediate access to power and data. Typical installations include − “Hot Desk”, Library and Office Desking.

Horizontal Powerdock

The Powerlogic Horizontal Powerdock is designed to meet the demands of both work stations and meeting room tables. The units can be made to order or is available in standard power and data configurations.

Oval Chrome Desk Cable Grommet

The top flange of this attractive executive grommet slides open to present a generous cable slot. Once the cables are fitted just slide the 2 parts of the grommet together to form a neat brushed cable opening and install the grommet into the 80mm diameter desk top cut out.

Executive Desk Cable Grommet

Fits a 63mm diameter desk top cut out this metal grommet is available in a wide range of finishes.The grommet has a single U shaped cable opening offering a 20mm x 20mm free cable area.

About us

Established in 1993, Gromtec Europe are a Dublin-based company specialising in cable grommets for a variety of applications.

Our extensive product range consists of brush grommets, metal grommets, raised access floor tile lifters, floor grommets, Air-BloXX foam gasket seals, Air Shield blanking panels, screen monitor arms, air vent grilles, watertight socket outlets, Air-Wall, Air-Block gasket seal grommets, desk and floor outlets, desktop cable grommets, fire stop cable transit ducts, cable and wire management solutions and numerous others that are available to view online.

Our Products Include:

Desk Cable Grommets

Desk cable grommets are essential accessories for organising and managing cables on desks efficiently. These discreet openings allow cables to pass through desks seamlessly, reducing clutter and preventing tangling. With various sizes and designs available, desk cable grommets offer both functionality and aesthetic appeal to any workspace.

Floor Cable Grommets

Floor cable grommets are indispensable for maintaining a tidy and hazard-free environment in offices or homes with extensive cable requirements. Designed to seamlessly integrate into flooring surfaces, these grommets provide a safe passage for cables while minimising tripping hazards and preserving the sleek appearance of the space.

Brush Grommets

Brush grommets are innovative cable management solutions designed to neatly route cables through openings while maintaining a clean and professional appearance. Featuring a flexible brush-like structure, they effectively seal around cables, preventing dust and debris from entering while allowing smooth movement of wires.

Air-Block Gasket Seal Grommets

Air-Block gasket seal grommets are specialised cable management accessories designed to provide an airtight seal around cables passing through openings in surfaces such as walls or floors. By preventing air leakage, they help maintain optimal climate control within a space, contributing to energy efficiency and comfort.

Air-BloXX Foam Gasket Seals

Air-BloXX foam gasket seals are effective solutions for sealing gaps and preventing air leakage around cables passing through walls, floors, or other surfaces. The foam material creates a tight seal, enhancing energy efficiency and climate control in buildings while also reducing noise transmission.

Air-Block Gasket Grommets

Air-Block gasket grommets are engineered to seal cable cutouts tightly, preventing air leakage and maintaining optimal environmental conditions in buildings. These grommets feature a durable gasket material that forms a reliable barrier against drafts, contributing to energy efficiency and comfort.

Metal Grommets

Metal grommets are robust and versatile accessories commonly used for reinforcing and protecting holes in various materials, such as fabric, leather, or plastic. Their durable construction ensures long-lasting performance, making them ideal for applications ranging from clothing and accessories to industrial settings where strength and reliability are paramount.

Waterproof Floor Boxes

Waterproof floor boxes are essential components in environments where electrical outlets need protection from moisture and water exposure. Designed to withstand harsh conditions, these boxes provide a safe and secure housing for power outlets, ensuring uninterrupted functionality even in damp or outdoor areas.

Desktop Cable Grommets

Desktop cable grommets are practical solutions for managing cables on work surfaces, keeping them organised and tangle-free. These discreet accessories fit seamlessly into the surface of desks or tables, providing convenient access for routing cables while maintaining a neat appearance.

In Desk Power

In desk power units offer convenient access to electrical outlets directly from the desktop, providing a streamlined solution for powering devices without cluttering the workspace. These units are typically installed flush with the desk surface, allowing easy plug-in for laptops, chargers, and other electronic devices while maintaining a sleek and professional appearance.

Under Desk Power

Under desk power units are discreet solutions for bringing power outlets directly beneath the desk surface, ensuring easy access while maintaining a clutter-free workspace. These units are installed securely underneath the desk, providing convenient plug-in points for charging devices or powering accessories without sacrificing aesthetic appeal.

Here at Gromtec, we are proud to be one of the first European cable grommet manufacturers, establishing ourselves as a reliable, trustworthy source of high quality products that are utilised across a broad range of sectors. Our award-winning products, such as the Air-Guard and Air-Block ranges, are widely recognised throughout the industry and often praised by customers who are fully satisfied with their service from start to finish. We employ a team of knowledgeable and experienced grommet specialists and continue to expand our services.

We are a family-run business offering exceptional customer service as well as competitive pricing on our products. We offer a very large range of products and services that are available to view online and pride ourselves on our ability to meet the demands of our customers on a regular basis.

Some of our main services include grommet design and manufacture, hole cutting, cold and hot aisle containment aisles, PDU design for racks and desks, customised floor box design and manufacture, IP rated floor outlet design and manufacture and many more.

View Website

Images

Request a Quote

Visit website