Company details for:
Hoyles Electronic Developments Ltd
(103)
Sandwash Close,
Rainford Industrial Estate,
Rainford,
St. Helens,
Merseyside,
WA11 8LY,
United Kingdom
Quick Links:
Products
Exitguard Door Alarm 100 Series - Keyswitch
Deter the misuse of emergency exit doors with the discrete Green Exitguard. The ideal solution for security of fire exit doors. An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has been breached
Exitguard Door Alarm 100 Series - Keyswitch
Deter the misuse of emergency exit doors with the discrete Red Exitguard. The ideal solution for security of fire exit doors. An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has been breached
Exitguard Door Alarm 200 Series - Keypad
The Exitguard 200 series is Keypad operated and available in three vesions. Exitguard is the ideal solution for security of fire exit doors. An integral high power sounder is activated when the door is opened to warn those in the vicinity that security has been breached.
EX204 is battery powered - Use where a separate supply of power is not available and the protected door is opened infrequently. Depending on usage the 6 x AA batteries supplied can last up to 3 years. The Exitguard will continue to function for at least two weeks after a battery fault indication.
EX205 is 12vdc powered - Use where the protected door may be opened frequently or the integral sounder may need to sound for long periods. There is a logic output signal, volt free relay contacts for separately signalling ON/OFF status/alarm conditions at remote points and can also be used as part of a system. (Power supply available separatley)
This version cannot be powered from batteries.
EX206 is 240vac mains powered - Use where the protected door may be opened frequently or the sounder may need to sound for long periods. There is a logic output signal, a volt free relay contact for alarm condition. This version is also supplied with 6 x AA alkaline batteries for standby. The batteries will not power the alarm relay.
EX204 is battery powered - Use where a separate supply of power is not available and the protected door is opened infrequently. Depending on usage the 6 x AA batteries supplied can last up to 3 years. The Exitguard will continue to function for at least two weeks after a battery fault indication.
EX205 is 12vdc powered - Use where the protected door may be opened frequently or the integral sounder may need to sound for long periods. There is a logic output signal, volt free relay contacts for separately signalling ON/OFF status/alarm conditions at remote points and can also be used as part of a system. (Power supply available separatley)
This version cannot be powered from batteries.
EX206 is 240vac mains powered - Use where the protected door may be opened frequently or the sounder may need to sound for long periods. There is a logic output signal, a volt free relay contact for alarm condition. This version is also supplied with 6 x AA alkaline batteries for standby. The batteries will not power the alarm relay.
Multiguard 6 Way Indicator
The MULTIGUARD is a general purpose six zone annunciator with global silence and reset. The enclosure design is such that virtually any system size can be met by stacking units together.
DorWatcher Door Held Open Alarm
Sometimes referred to as a door screecher, the DorWatcher is an alarm unit used to prevent doors being left open for extended periods of time.
Typically used to alarm kitchen doors in student accommodation, the alarm is activated if the kitchen door remains open for more than 1 minute prompting people in the vicinity to close the door thereby preventing smoke from cooking drifting into corridors and causing fire alarm activations.
Once activated the alarm is automatically reset as soon as the door is closed.
Typically used to alarm kitchen doors in student accommodation, the alarm is activated if the kitchen door remains open for more than 1 minute prompting people in the vicinity to close the door thereby preventing smoke from cooking drifting into corridors and causing fire alarm activations.
Once activated the alarm is automatically reset as soon as the door is closed.
Zoneguard Grade 3 Zone Omit EN50131-3:2009 Env. Class II
ZONEGUARD ZG800 is a Grade 3 EN50131 zone omit unit that fits between intruder detection devices and a control panel to allow the devices to be securely and safely omitted and reinstated without generating false alarms.
ChatterBox Talking Alarm Module Voice Sounder
The ChatterBox Talking Alarm Module is a self contained audio module with loud speaker. Typical uses include a voice sounder for an intruder alarm, building welcome messages, general alarm messages.
Please note if you choose to record messages yourself the format of any sound file used in the Chatterbox MUST meet the specification detailed in the installation instructions. Failure to comply with the required format may cause damage to the unit and will not be covered by warranty.
Please note if you choose to record messages yourself the format of any sound file used in the Chatterbox MUST meet the specification detailed in the installation instructions. Failure to comply with the required format may cause damage to the unit and will not be covered by warranty.
Keyguard Emergency Access Key Box
Keyguard is a unique plastic emergency key box into which a clear non hazardous plastic window is fitted. Designed to retain a key or access control card the Keyguard is a modern and safe alternative to the traditional break glass key box.
A recess enables quick removal of the plastic window in an emergency to retrieve the key. The window is designed in such a way that it cannot be refitted after removal. Widely used by fire exit doors, in computer rooms, for master key storage and other situations where a key or card needs to be kept safe and secure.
Three versions available.
A recess enables quick removal of the plastic window in an emergency to retrieve the key. The window is designed in such a way that it cannot be refitted after removal. Widely used by fire exit doors, in computer rooms, for master key storage and other situations where a key or card needs to be kept safe and secure.
Three versions available.
Secure-a-Link Wireless Relay Transmitter / Receiver System
The Secure-a-Link system consists of two identical transceiver units, which are paired together, each requiring a local 12VDC power supply. The units can transmit up to 200ft in free space.
The system is designed to take a clean contact input and transmit this wirelessly to another point, giving a clean contact output, without the need for hardwiring between the two points.
Two way communication between the units is provided so that signals can be sent in either or both directions and once paired, the units only communicate within their pair, so multiple pairs of units can be used within the same area without interference.
The system is designed to take a clean contact input and transmit this wirelessly to another point, giving a clean contact output, without the need for hardwiring between the two points.
Two way communication between the units is provided so that signals can be sent in either or both directions and once paired, the units only communicate within their pair, so multiple pairs of units can be used within the same area without interference.
Multi Function Bathroom Controller
Hoyles Shared Bathroom Solution is an effective way to utilise building space. Sharing one bathroom between 2 rooms can save an entire bathroom worth of floor space plus the cost of the sanitary ware. As well as the obvious money saving benefits the Shared Bathroom Solution provides secure door control, preventing the bathroom being used as a passageway and total privacy for its users. An incorporated advanced assistance alarm automatically releases a door if help is called for and prevents users from hogging the bathroom.
Door Interlock Systems
This sophisticated door interlock controller allows 2, 3 or 4 doors to be interlocked to restrict or control entry to and from areas that need to be secured against two or more doors being open simultaneously.
Two fundamental operational modes are available:
Mode 1 Keep all doors closed but unlocked, when a door is opened all other doors are locked.
Mode 2 Keep all doors closed and locked, unlock a door upon request.
The system comprehensively caters for use with any kind of door lock and any kind of door even including powered doors, roller shutters, traffic bollards etc..
Two fundamental operational modes are available:
Mode 1 Keep all doors closed but unlocked, when a door is opened all other doors are locked.
Mode 2 Keep all doors closed and locked, unlock a door upon request.
The system comprehensively caters for use with any kind of door lock and any kind of door even including powered doors, roller shutters, traffic bollards etc..
Stop ''n'' Search Random Employee Search Selector
Stop n Search offers a solution for sites with a need for random staff searches.
Searching all staff can be time consuming and disruptive, and whilst random searches do eliminate many of the problems, the frequency of such searches can result in allegations of discrimination and victimisation.
Searching all staff can be time consuming and disruptive, and whilst random searches do eliminate many of the problems, the frequency of such searches can result in allegations of discrimination and victimisation.
Transistorised Double Pole Relay Module
General purpose transistor driven interface relay. This device accepts a variety of input conditions (Voltage, Logic, Closed Circuit and Open Circuit) for interfacing various signals via voltage free DPCO contacts.
Self adhesive backed for easy mounting. Four mounting holes provided for more permanent fixing. Screw terminals for easy connection
Self adhesive backed for easy mounting. Four mounting holes provided for more permanent fixing. Screw terminals for easy connection
Entryguard Engaged Wait Enter Kit
The ENTRYGUARD is a fully featured Engaged Wait Enter privacy controller with additional features for visitor access control, reception call and emergency call. It is powered by 230vac mains electricity and is supplied with a visitor call button with LEDs to indicate room status and to indicate that entry is permitted. Typical uses are consulting rooms, meeting rooms and interview rooms.
Aidalarm Battery Powered Disabled Toilet Alarm Kit
This battery powered kit meets the requirements for emergency signalling systems for disabled persons. It is fully compliant with BS8300 and the Disability Discrimination Act. Everything is provided in the kit (except cable and fixings) to deliver an effective, fully compliant, simple to install and simple to use system. Operation To generate a call the user simply pulls the pull cord. The controller is powered by 6 AA Alkaline batteries which should last more than 12 months in normal use. The system provides a low battery warning. When the call is generated an audible and visual warning is given at both the toilet area and at the Aidalarm controller which can, if required, be located away from the toilet possibly in a reception area. The call can be muted at the controller by pressing the button at the centre of the four LEDs. This will cause the Aidalarm to bleep every 40 seconds as a warning of non attendance to reception. The audible indications at the toilet area will bleep every five seconds to re-assure the caller. The system can only be reset at (or near) the point of call using the Reset Button. The system is entirely battery powered and as such avoids any conflict with Part P building regulations.
Dado Panic and Affray Switch Strip
DaDo Panic Strip is a switch strip en-cased in a high-durability housing for use as a panic or affray alarm. Ideal where people may need to signal for help or assistance, it can be operated along its entire length.
The DaDo Panic Strip comprises of four main components, the switch strip, tamper-resistant top cover, aluminum mounting rail and a choice of end-caps.
The switch itself is a normally open switch and has flying leads on both ends for connection. We recommend the use of our Redimon monitor unit which will monitor panic strip for both alarms and faults and provide relay outputs for both conditions.
The DaDo Panic Strip comprises of four main components, the switch strip, tamper-resistant top cover, aluminum mounting rail and a choice of end-caps.
The switch itself is a normally open switch and has flying leads on both ends for connection. We recommend the use of our Redimon monitor unit which will monitor panic strip for both alarms and faults and provide relay outputs for both conditions.
GEMINI Battery Powered Fire Alarm
The GX20e is a battery powered manual fire alarm housed in a robust steel enclosure. It is ideal for small buildings where a single standalone system is sufficient, however the system can be expanded by linking up to four units together. It is not possible to install additional individual call points or sounders. The GX20e does NOT take smoke or heat detectors. For larger systems where callpoints and sounders must be interconnected or there is a requirement for smoke detectors we would recommend our GX32 system.
Ideal for Doctors surgeries, Building sites, Heavy industrial use, Temporary buildings, Outdoor events, Marquees and Portable buildings.
Ideal for Doctors surgeries, Building sites, Heavy industrial use, Temporary buildings, Outdoor events, Marquees and Portable buildings.
HobWatcher Automatic Hob Isolator System
HobWatcher provides an effective means of ensuring electric hobs cannot be left on while unattended. The HobWatcher will switch off power to the hob after a preset time if no user is present. HobWatcher is virtually transparent to the user requiring minimal intervention.
HobWatcher helps protect vulnerable kitchen users, including students and the elderly, from the dangers of kitchen fires.
HobWatcher helps protect vulnerable kitchen users, including students and the elderly, from the dangers of kitchen fires.
MayDay - Lone Worker Alarm
The MAYDAY LONEWORKER safety system is designed to raise an alarm if a lone worker becomes incapacitated. Once the Mayday is armed, the primary countdown timer 20 - 60 minutes is started and indication is given by countdown LED's. At the end of the primary period the secondary timer 2 - 10 minutes starts and an audible and visual warning is given to prompt the lone worker to acknowledge there presence by pressing the OK button. As the timer approaches time out, the indications become more urgent. If the lone worker fails to respond the Mayday signals for assistance.
Exit Way Guidance
The Exiti provides a simple but effective Exit Way Guidance system. Each unit is battery powered and stand alone. Installation takes minutes with no wiring involved. Easy to retrofit - a great suplement to traditional emergency escape lighting.
Call Button with Reassurance LEDs & Sounder
A wall mounted Call button in white ABS complete with a single gang mounting box. This is a non-latching unit with N/O contacts. The LEDs (available in RED, BLUE, GREEN or YELLOW) and sounder have separate terminals for acknowledge purposes. The LED and sounder current limit resistor is provided for 12 vdc operation. The button contacts are rated at 50mA @ 12vdc. N/O press to close.
They should NOT be used for switch feeds to door strikes or mag locks etc.
They should NOT be used for switch feeds to door strikes or mag locks etc.
Mushroom Headed Momentary Action Button
Mushroom headed button with momentary action. Supplied with normally closed and normally open contacts.
Specification
Led Current - N/A
Switch Contacts - 1 x N/O 1 x N/C both 500mA @30vdc
Sounder Current - N/A
Visual Indication - N/A
Integral Sounder Level - N/A
Tamper - N/A
Material - 316 Grade Stainless Steel
Dimensions - 86 x 86 x 2mm - Facia
47mm galvanised back box supplied
Surface mounted using part no. S0610-50 listed below
Weight - 0.34kg
IP Rating - IP65 front side contact area
Approvals - CE and RoHs compliant
Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below
Specification
Led Current - N/A
Switch Contacts - 1 x N/O 1 x N/C both 500mA @30vdc
Sounder Current - N/A
Visual Indication - N/A
Integral Sounder Level - N/A
Tamper - N/A
Material - 316 Grade Stainless Steel
Dimensions - 86 x 86 x 2mm - Facia
47mm galvanised back box supplied
Surface mounted using part no. S0610-50 listed below
Weight - 0.34kg
IP Rating - IP65 front side contact area
Approvals - CE and RoHs compliant
Weather gasket Code: WG1 is available for the rear of the plate if required
Anti tamper screws available, see related products below
Press to Exit Button Stainless Steel
Flush fitting stainless steel call point with a vandal resistant button, engraved Press to Exit . This is a single pole non-latching unit with change over contacts.
Suitable for use with access control and door interlock systems
Suitable for use with access control and door interlock systems
Sanipull 3m Anti Ligature Hygenic Pull Cord
Sanipull is a hygenic true anti-ligature REPLACEMENT cord set suitable for use with virtually any pull cord switch.
The smooth finished cord can be easily wiped clean. The cord has holes in it at regular intervals designed to break apart at the weak zones when a force of 13Kg + or - 1Kg is applied.
3m cord provided with universal fitting and two bangles and is compatible with most pull cord switches. Sanipull is manufactured from vinyl. To clean using non-caustic alcohol based sanitiser / gel.
Install as recommended in the Healthcare Technical Manual (HTM Section 0803)
Once fitted the S300CLAM is not designed to be tampered with, if the cord needs to be replaced or moved, then a new clam should be used..
Please remember that for nurse call pulls, to comply with legislation you must have 1 bangle 100mm from the floor and another bangle 800mm - 1000mm from the floor.
The smooth finished cord can be easily wiped clean. The cord has holes in it at regular intervals designed to break apart at the weak zones when a force of 13Kg + or - 1Kg is applied.
3m cord provided with universal fitting and two bangles and is compatible with most pull cord switches. Sanipull is manufactured from vinyl. To clean using non-caustic alcohol based sanitiser / gel.
Install as recommended in the Healthcare Technical Manual (HTM Section 0803)
Once fitted the S300CLAM is not designed to be tampered with, if the cord needs to be replaced or moved, then a new clam should be used..
Please remember that for nurse call pulls, to comply with legislation you must have 1 bangle 100mm from the floor and another bangle 800mm - 1000mm from the floor.
Wireless Disabled Toilet Alarm
This wireless kit has a mains powered controller and battery powered ancillary items. Meeting the requirements for emergency signalling systems for disabled persons and is fully compliant with BS8300 and the Disability Discrimination Act. Everything is provided in the kit and all required batteries are supplied, delivering an effective, fully compliant, simple to install and simple to use system.
Battery status is monitored by the controller. When the batteries require replacing, the controller will indicate a fault. When fault is indicated replace all batteries within the system. The system should be tested monthly and we recommend that all batteries are replaced every twelve months.
Battery status is monitored by the controller. When the batteries require replacing, the controller will indicate a fault. When fault is indicated replace all batteries within the system. The system should be tested monthly and we recommend that all batteries are replaced every twelve months.
About us
Hoyles Electronic Developments Ltd - Celebrating 45 years in the Security, Fire and Safety Industry
Originally founded in 1965 by Jack Hoyle an ex fireman. Hoyles Electronics is a family owned business now being run by the third generation. Here at Hoyles we pride ourselves on providing a level of services and customer care that is second to none, ensuring that customer requirements are fully meet in all aspects. This is reinforced by our IS09001 certification that we have held since 1994.
As designers and manufacturers of electronic fire, safety and security equipment we have a reputation for innovative niche market products. Call our in house designers to help you create the perfect solution for your problem.
Our Products & Services Include:
Exitguard Door Alarms
The Exitguard satisfies the requirements of both fire and security officers. Exitguards are competitively priced and are a cost effective way of protecting sensitive doors. Ideal for Hotels, Supermarkets, Warehouses, Public Buildings, Garages, etc… Battery, Mains and 12volt dc powered versions are available. All are supplied with a magnetic door contact, fixing screws, and a self-adhesive door warning label. This new version is backwards compatible with older Exitguards. Keypad and Keyswitch versions available.
General Purpose Indicator
The Multiguard is a six-zone indicator used in the emergency alarm market. The basic Multiguard has facilities for global silence and reset. All versions can be supplied with and without an integral power supply and stand-by battery. Look-a-like repeaters enable simultaneously indication at a number of different locations, and if required can have control facilities. A separate relay interface card is available to give zonal output to other systems such as CCTV switchers or BMS systems. Multiguard enclosure is designed in such a way that units can be stacked forming 12, 18 or 24 zone indicators. For larger systems we can offer a custom designed solution.
Disabled Toilet Alarm
Comprehensive BS8300 compliant disabled toilet alarm kits are now available from Hoyles. The new AIDALARM kits are available in plastic or stainless steel finish and include all equipment required to create a disabled toilet alarm to satisfy the requirements of the Disability Discrimination Act. The AIDALARM is operated by a pull cord and can be reset from a button inside the toilet cubicle or from the control unit which also provides audible and visual indications. The Aidalarm can be extended to give remote indication and has programmable sounder tones to suit different environments. The kits comprise the Aidalarm control unit, pull cord, reset button and a self adhesive disabled toilet sign along with full installation instructions.
Keyguard
The Keyguard is not your average key box it has been designed with safety as well as security in mind. The Keyguard is able to take both KEYS and CARDS and is available with or without alarm facilities, either battery powered alarm or simply as a single pole micro switch making it suitable for many applications. The window is designed in such a way that it cannot be refitted after removal. The Keyguard plastic window enables it to be used in such areas as schools, food preparation areas and swimming pools. There are no shards of glass or sharp edges that could cause injury.
Standalone Fire Alarm GX20e
The GX20e is the simple and economic fire alarm. Featuring an integral call point and high power (105db @ 1m) piezo sounder. The two PP3 batteries are supervised by an integral battery fault monitor. A keyswitch is used to silence or restart the alarm. The GX20e is intended as a manual fire alarm for small buildings where a single standalone system is sufficient, however, up to four units can be linked together. The GX20e does NOT take smoke or heat detectors. For larger systems where callpoints and sounders must be interconnected or there is a requirement for smoke detectors we would recommend our GX32 System.
Originally founded in 1965 by Jack Hoyle an ex fireman. Hoyles Electronics is a family owned business now being run by the third generation. Here at Hoyles we pride ourselves on providing a level of services and customer care that is second to none, ensuring that customer requirements are fully meet in all aspects. This is reinforced by our IS09001 certification that we have held since 1994.
As designers and manufacturers of electronic fire, safety and security equipment we have a reputation for innovative niche market products. Call our in house designers to help you create the perfect solution for your problem.
Our Products & Services Include:
Exitguard Door Alarms
The Exitguard satisfies the requirements of both fire and security officers. Exitguards are competitively priced and are a cost effective way of protecting sensitive doors. Ideal for Hotels, Supermarkets, Warehouses, Public Buildings, Garages, etc… Battery, Mains and 12volt dc powered versions are available. All are supplied with a magnetic door contact, fixing screws, and a self-adhesive door warning label. This new version is backwards compatible with older Exitguards. Keypad and Keyswitch versions available.
General Purpose Indicator
The Multiguard is a six-zone indicator used in the emergency alarm market. The basic Multiguard has facilities for global silence and reset. All versions can be supplied with and without an integral power supply and stand-by battery. Look-a-like repeaters enable simultaneously indication at a number of different locations, and if required can have control facilities. A separate relay interface card is available to give zonal output to other systems such as CCTV switchers or BMS systems. Multiguard enclosure is designed in such a way that units can be stacked forming 12, 18 or 24 zone indicators. For larger systems we can offer a custom designed solution.
Disabled Toilet Alarm
Comprehensive BS8300 compliant disabled toilet alarm kits are now available from Hoyles. The new AIDALARM kits are available in plastic or stainless steel finish and include all equipment required to create a disabled toilet alarm to satisfy the requirements of the Disability Discrimination Act. The AIDALARM is operated by a pull cord and can be reset from a button inside the toilet cubicle or from the control unit which also provides audible and visual indications. The Aidalarm can be extended to give remote indication and has programmable sounder tones to suit different environments. The kits comprise the Aidalarm control unit, pull cord, reset button and a self adhesive disabled toilet sign along with full installation instructions.
Keyguard
The Keyguard is not your average key box it has been designed with safety as well as security in mind. The Keyguard is able to take both KEYS and CARDS and is available with or without alarm facilities, either battery powered alarm or simply as a single pole micro switch making it suitable for many applications. The window is designed in such a way that it cannot be refitted after removal. The Keyguard plastic window enables it to be used in such areas as schools, food preparation areas and swimming pools. There are no shards of glass or sharp edges that could cause injury.
Standalone Fire Alarm GX20e
The GX20e is the simple and economic fire alarm. Featuring an integral call point and high power (105db @ 1m) piezo sounder. The two PP3 batteries are supervised by an integral battery fault monitor. A keyswitch is used to silence or restart the alarm. The GX20e is intended as a manual fire alarm for small buildings where a single standalone system is sufficient, however, up to four units can be linked together. The GX20e does NOT take smoke or heat detectors. For larger systems where callpoints and sounders must be interconnected or there is a requirement for smoke detectors we would recommend our GX32 System.
Images
Articles / Press Releases
Brochures
Reviews
Trade Associations
