Company details for:
Kentec Electronics Ltd
(0)
Unit 25-27 Fawkes Avenue,
Questor,
Dartford,
Kent,
DA1 1JQ,
United Kingdom
Quick Links:
Products
Taktis Fire
Analogue Addressable 2-16 Loop Fire Control Panels
Overview
> With the increasing demands for power in fire detection and alarm systems, Taktis Fire control panels are well placed to meet current and future needs.
> All panels are available with either a 5.25A, 24V power supply capable of charging up to 26Ah batteries or a 10.25A, 24V power supply capable of charging up to 45Ah batteries. Taktis Fire can be supplied with one of a range of remote power supply units making the control panel smaller and easier to install.
> Up to 500 milliamps is available for each detection loop allowing for a generous quantity of loop powered devices.
> The four sounder circuits are each capable of supplying up to 2.5A at 24V to audio and audio visual devices.
Features
> Compliant with EN54-2, EN54-4 and EN54-13
> Detector protocol selectable via front panel menu screens
> Up to 144 zone LED indicators on standard models
> Support for up to 2000 zones and zone LED indicators
> Built in programmable I/Os
> Up to 512 programmable I/O via optional plug in cards
> Modbus, LonWorks and BACnet interface options
> Full colour, 7"800 x 480 touch screen graphical display
Overview
> With the increasing demands for power in fire detection and alarm systems, Taktis Fire control panels are well placed to meet current and future needs.
> All panels are available with either a 5.25A, 24V power supply capable of charging up to 26Ah batteries or a 10.25A, 24V power supply capable of charging up to 45Ah batteries. Taktis Fire can be supplied with one of a range of remote power supply units making the control panel smaller and easier to install.
> Up to 500 milliamps is available for each detection loop allowing for a generous quantity of loop powered devices.
> The four sounder circuits are each capable of supplying up to 2.5A at 24V to audio and audio visual devices.
Features
> Compliant with EN54-2, EN54-4 and EN54-13
> Detector protocol selectable via front panel menu screens
> Up to 144 zone LED indicators on standard models
> Support for up to 2000 zones and zone LED indicators
> Built in programmable I/Os
> Up to 512 programmable I/O via optional plug in cards
> Modbus, LonWorks and BACnet interface options
> Full colour, 7"800 x 480 touch screen graphical display
Syncro AS
Single or Two Loop Analogue Addressable Fire Control Panels
> Syncro AS is a versatile range of open protocol fire alarm control panels compatible with existing Syncro fire alarm panel technology.
> Available with one or two detection loops capable of hosting up to 126 devices (Apollo), 240 devices (Argus Vega) or 127 devices (Hochiki). Syncro AS uses leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity.
> Suitable for all small to medium sized fire detection systems, Syncro AS control panels can be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any installation.
> With its large graphical display and ergonomic button and indicator layout, the Syncro AS control panel is simple and straightforward to understand for installers, commissioning engineers and end users alike.
> Syncro AS is a versatile range of open protocol fire alarm control panels compatible with existing Syncro fire alarm panel technology.
> Available with one or two detection loops capable of hosting up to 126 devices (Apollo), 240 devices (Argus Vega) or 127 devices (Hochiki). Syncro AS uses leading edge microprocessor based electronics to provide a flexible control system with high reliability and integrity.
> Suitable for all small to medium sized fire detection systems, Syncro AS control panels can be expanded and networked to become part of much larger systems if the need arises, therefore providing a future proof solution for any installation.
> With its large graphical display and ergonomic button and indicator layout, the Syncro AS control panel is simple and straightforward to understand for installers, commissioning engineers and end users alike.
Syncro View
Local LCD Repeaters
> Designed and manufactured to the highest standards in a quality controlled environment the Syncro VIEW fire alarm annunciator provides a simple and convenient method of extending the controls and indications of the Syncro fire alarm control panel to other locations.
> The large, graphic liquid crystal display and high brightness LED indicators duplicate the indications on the Syncro fire alarm control panel at up to 15 additional locations via a simple, two-wire serial data connection.
> The Syncro VIEW is available in either a 24V DC powered option (which can be powered via an additional 2 cores from the Syncro control panel/local 24V DC supply) or a 230V powered option with local battery back up.
> Syncro VIEW is housed in a small enclosure which is styled similarly to the Syncro control panel and is ideal for installations where a large control panel would be detrimental to décor such as entrance halls.
> Up to 15 Syncro VIEW annunciators can be connected to each control panel on the Syncro network making VIEW ideal where multiple points of indication and/or control are required such as nurses stations or shop units.
> Designed and manufactured to the highest standards in a quality controlled environment the Syncro VIEW fire alarm annunciator provides a simple and convenient method of extending the controls and indications of the Syncro fire alarm control panel to other locations.
> The large, graphic liquid crystal display and high brightness LED indicators duplicate the indications on the Syncro fire alarm control panel at up to 15 additional locations via a simple, two-wire serial data connection.
> The Syncro VIEW is available in either a 24V DC powered option (which can be powered via an additional 2 cores from the Syncro control panel/local 24V DC supply) or a 230V powered option with local battery back up.
> Syncro VIEW is housed in a small enclosure which is styled similarly to the Syncro control panel and is ideal for installations where a large control panel would be detrimental to décor such as entrance halls.
> Up to 15 Syncro VIEW annunciators can be connected to each control panel on the Syncro network making VIEW ideal where multiple points of indication and/or control are required such as nurses stations or shop units.
Syncro Matrix
Fire Alarm Mimic Display
> The Syncro Matrix system uses flexible, fibre optic light guides to illuminate areas on a floor plan, laid over a high resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved, removed or added on site without the need for any wiring.
> All indicators can be configured to operate upon any event type and at point, zone or group level via Kentec’s powerful and intuitive Loop Explorer configuration programme. Syncro Matrix can be supplied with or without LEDs and controls. Optional LEDs indicate Power on, Fire, Fault and Disablement and optional controls are for Alarm silence, Buzzer silence, Lamp test and Reset.
> Housed in attractive, slimline enclosures to match Syncro and Syncro AS fire alarm panels and with high quality, full colour or monochrome floor plans, Syncro Matrix provides a clear, geographical indication of fire alarm activation enabling speedy identification of the source of an alarm.
> The Syncro Matrix system uses flexible, fibre optic light guides to illuminate areas on a floor plan, laid over a high resolution grid. This unique system dispenses completely with wiring and enables indicators to be moved, removed or added on site without the need for any wiring.
> All indicators can be configured to operate upon any event type and at point, zone or group level via Kentec’s powerful and intuitive Loop Explorer configuration programme. Syncro Matrix can be supplied with or without LEDs and controls. Optional LEDs indicate Power on, Fire, Fault and Disablement and optional controls are for Alarm silence, Buzzer silence, Lamp test and Reset.
> Housed in attractive, slimline enclosures to match Syncro and Syncro AS fire alarm panels and with high quality, full colour or monochrome floor plans, Syncro Matrix provides a clear, geographical indication of fire alarm activation enabling speedy identification of the source of an alarm.
Syncro Ident
Programmable LED Indication Panels
> Syncro Ident panels provide a compact and attractive display for up to 24 indications from a Syncro or Syncro AS fire control panel. As with all inputs and outputs on the Syncro system, each indicator is fully programmable to indicate a variety of events as well as being fully programmable via cause and effects to operate in response to logically connected inputs. Each indication defaults to a zonal fire indicator but may be configured via the Loop Explorer configuration utility to operate upon any event type or combination of inputs.
> Requiring only a low current 24V power supply and a 2 core data connection to the fire panel, Syncro Ident panels can be installed quickly and easily to provide supplementary information on the status of the fire alarm system with the minimum of cost and effort.
> The compact, slimline enclosure is unobtrusive and is ideal for mounting in locations where a larger control and indication unit would be unsuitable.
> Each indication has a dedicated field for customized text to provide a concise description of the indication.
> Multiple Syncro Ident panels can be connected to the Syncro serial bus to provide a diverse range of indications at multiple locations.
> The units are supplied with blank label inserts and are easily customisable using an online bespoke labeltemplate.
> Syncro Ident panels provide a compact and attractive display for up to 24 indications from a Syncro or Syncro AS fire control panel. As with all inputs and outputs on the Syncro system, each indicator is fully programmable to indicate a variety of events as well as being fully programmable via cause and effects to operate in response to logically connected inputs. Each indication defaults to a zonal fire indicator but may be configured via the Loop Explorer configuration utility to operate upon any event type or combination of inputs.
> Requiring only a low current 24V power supply and a 2 core data connection to the fire panel, Syncro Ident panels can be installed quickly and easily to provide supplementary information on the status of the fire alarm system with the minimum of cost and effort.
> The compact, slimline enclosure is unobtrusive and is ideal for mounting in locations where a larger control and indication unit would be unsuitable.
> Each indication has a dedicated field for customized text to provide a concise description of the indication.
> Multiple Syncro Ident panels can be connected to the Syncro serial bus to provide a diverse range of indications at multiple locations.
> The units are supplied with blank label inserts and are easily customisable using an online bespoke labeltemplate.
Syncro IO
16 Channel Input/Output Unit
> To add more I/O capability to the extensive options already offered by the Syncro control panel, up to thirty two, sixteen channel I/O boards may be connected.
> The 16 channel boards may be mixed on the RS485 bus with 8 way sounder boards, 6 way sounder boards or 4 way conventional detection zone boards to provide a very flexible system of I/O to satisfy any requirement.
> When using a simple two wire RS485 communications protocol, these boards may be mounted locally to the control panel or distributed on a bus up to 1200 metres long by using a suitable cable.
> The flexibility of these boards is further enhanced by the fact that each of the channels is configurable as either an input or and output.
> Each channel may also be configured to produce a variety of input actions or respond to a variety of output types.
> All channels can contribute to, or respond to, system wide cause and effects logic.
> Typical uses for I/O boards include geographical LED mimic displays and plant alarm inputs.
> Standard Syncro control panels contain fixings for one sounder, relay, conventional detection or I/O board, which can easily be connected using four small signal wires to the power and comms bus within the panel.
> Consideration must be taken as to the loading on the main panel.
> To add more I/O capability to the extensive options already offered by the Syncro control panel, up to thirty two, sixteen channel I/O boards may be connected.
> The 16 channel boards may be mixed on the RS485 bus with 8 way sounder boards, 6 way sounder boards or 4 way conventional detection zone boards to provide a very flexible system of I/O to satisfy any requirement.
> When using a simple two wire RS485 communications protocol, these boards may be mounted locally to the control panel or distributed on a bus up to 1200 metres long by using a suitable cable.
> The flexibility of these boards is further enhanced by the fact that each of the channels is configurable as either an input or and output.
> Each channel may also be configured to produce a variety of input actions or respond to a variety of output types.
> All channels can contribute to, or respond to, system wide cause and effects logic.
> Typical uses for I/O boards include geographical LED mimic displays and plant alarm inputs.
> Standard Syncro control panels contain fixings for one sounder, relay, conventional detection or I/O board, which can easily be connected using four small signal wires to the power and comms bus within the panel.
> Consideration must be taken as to the loading on the main panel.
Sigma CP
Conventional Fire Control Panels
> The Sigma CP range consists of a series of conventional fire alarm control panels designed in accordance with European standards BS EN54-2 and BS EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment.
> The range consists of 2, 4 and 8 zone control panels. All control panels are available in two versions:
> Sigma K11 range in which detectors and call points are wired on separate circuits to sounders (two sounder circuits are provided).
> Sigma T11 range in which detectors, call points and sounders are wired to the same pair of cables. Commonly referred to as a two-wire system.
> Wiring sounders to the detection circuits eliminates the need to install sounder circuit cables and also offers the ability to provide zoned or two stage sounder operation.
> All control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of BS EN54-4.
> The Sigma CP range consists of a series of conventional fire alarm control panels designed in accordance with European standards BS EN54-2 and BS EN54-4 Fire Detection and Fire Alarm systems - Control and Indicating Equipment.
> The range consists of 2, 4 and 8 zone control panels. All control panels are available in two versions:
> Sigma K11 range in which detectors and call points are wired on separate circuits to sounders (two sounder circuits are provided).
> Sigma T11 range in which detectors, call points and sounders are wired to the same pair of cables. Commonly referred to as a two-wire system.
> Wiring sounders to the detection circuits eliminates the need to install sounder circuit cables and also offers the ability to provide zoned or two stage sounder operation.
> All control panels have an integral, mains powered battery charger and power supply designed in accordance with the requirements of BS EN54-4.
Sigma CP-R
Conventional Fire Control Panel Repeaters
> The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above.
> Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions).
> Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.
> A mixture of Repeaters or Ancillary boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.
> The Sigma CP-R Repeater is compatible with all Sigma CP control panels which have operating software version V2.0 or above.
> Repeaters are available with 2, 4 or 8 zones and in mains powered (K versions) or 24V powered (E versions).
> Mains powered repeaters require only a two core data cable from the main control panel. 24V DC versions require an additional two cores for power either from the main panel or from another 24V DC source.
> A mixture of Repeaters or Ancillary boards up to a maximum of 7 of each type can be connected to a control panel and each is allocated an address from 1 to 7 using a binary coded DIL switch. The total length of the data cable from the main panel to the last repeater must not exceed 1200 metres.
Sigma XT
Extinguishant Control Panel
> Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT extinguishant releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
> With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
> The extensive configuration options of the Sigma XT allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1).
> The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety.
> The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status.
> With all of the electronics mounted on a single, easily removable, steel plate Sigma XT panels are both robust and easy to install.
> Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.
> Designed and manufactured to the highest standards in a quality controlled environment and with European EN12094-1 approvals, the Sigma XT extinguishant releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
> With three detection zones as standard, extinguishant release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
> The extensive configuration options of the Sigma XT allow the functionality of the system to be extensively modified while still complying with the requirements of the controlling standard for the equipment (EN12094-1).
> The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until extinguishant release for added user safety.
> The countdown timer is duplicated on up to seven remote status units to provide local indication of the extinguishant system status.
> With all of the electronics mounted on a single, easily removable, steel plate Sigma XT panels are both robust and easy to install.
> Sigma XT is supplied in an enclosure that matches the design and colour of the Sigma CP range.
Sigma XT+
Multi Area Extinguishant Control Panel
> Sigma XT+ control panels are multi-area extinguishant control panels complying with EN12094-1.
> Up to 8 zones of conventional detection with up to 4 extinguishant areas are available. Stand alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules.
> Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishant areas may have up to 7, serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable.
>The versatility of the control panel can be enhanced further by the fitting of up to 7 Sigma CP Ancillary boards (K580) or Sigma CP Sounder boards (K461) to the RS485 serial bus. See data sheet DS39 and DS48.
> Sigma XT+ control panels are multi-area extinguishant control panels complying with EN12094-1.
> Up to 8 zones of conventional detection with up to 4 extinguishant areas are available. Stand alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules.
> Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishant areas may have up to 7, serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable.
>The versatility of the control panel can be enhanced further by the fitting of up to 7 Sigma CP Ancillary boards (K580) or Sigma CP Sounder boards (K461) to the RS485 serial bus. See data sheet DS39 and DS48.
Sigma Si
Extinguishant Status Indicators
> The Sigma SI range of status indicators provide detailed status information for Sigma XT extinguishant release control equipment.
> All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
> For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
> All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
> All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.
> The Sigma SI range of status indicators provide detailed status information for Sigma XT extinguishant release control equipment.
> All models provide high brightness, LED indication of Manual Only, Automatic and Manual, Hold operated, Disabled, Imminent and Released conditions. Models are also available with zonal fire indicators and a common fault indicator.
> For systems where local control of the Automatic/Manual mode and or a Manual extinguishant release control are required, units are available with these controls fitted.
> All models have monitored inputs for the remote connection of Automatic/ Manual mode and Hold switches.
> All units contain a large, LED display which shows a countdown of the time remaining until the extinguishant is released in seconds.
Syncro XT+
Multi Area Addressable Extinguishant Control Panel
> Syncro XT+ control panels are multi-area extinguishant control panels complying with EN12094-1, EN54-2 and EN54-4.
> Up to 16 zones of addressable detection over 1 or 2 loops are available for extinguishant release. Up to 4 extinguishant areas are available. Stand alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules.
> Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishant areas may have up to 7, serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable.
> For compatible status units see Sigma Si data sheet DS41.
> Syncro XT+ control panels are multi-area extinguishant control panels complying with EN12094-1, EN54-2 and EN54-4.
> Up to 16 zones of addressable detection over 1 or 2 loops are available for extinguishant release. Up to 4 extinguishant areas are available. Stand alone extinguishant control units are also available with 2 monitored inputs to receive initiating signals from remote fire detection control panels or addressable modules.
> Each extinguishant area has a comprehensive set of inputs and outputs and is configurable via a simple programming interface. All extinguishant areas may have up to 7, serially connected Sigma Si status indication and control units or ancillary relay boards connected via a simple 4 core cable.
> For compatible status units see Sigma Si data sheet DS41.
Sigma XT Ancillaries
Hold Off Unit
> The K91000M10 Hold Off Unit provides a robust and convenient point to apply a temporary hold to release of fire protection extinguishant release. The robust push-button is shrouded to prevent accidental operation and is coloured to comply with the requirements of BS7273-1.
> Housed in an attractive surface mounting single gang enclosure, the unit is suitable for flush mounting to a standard single gang back box.
> The K91000M10 Hold Off Unit provides a robust and convenient point to apply a temporary hold to release of fire protection extinguishant release. The robust push-button is shrouded to prevent accidental operation and is coloured to comply with the requirements of BS7273-1.
> Housed in an attractive surface mounting single gang enclosure, the unit is suitable for flush mounting to a standard single gang back box.
2.5A & 5.25A PSU
EN54-4 Approved Switched Mode Power Supply/ Charger
> The S406/S407 power supply/battery charger has been developed using switched mode technology to produce an efficient and lightweight power unit for a host of fire alarm applications.
> Suited to almost any application, the S406/S407 is designed to be a universal power source which will reduce spares stock holding and increase serviceability of systems.
> The comprehensive monitoring features of the S406 include true battery present detection, low battery voltage warning, battery overcharge warning and low battery shut off. The S407 features include true battery present detection, low battery voltage warning and mains fail warning.
>These features combined with the temperature compensated charger output will increase the service life of sealed lead acid batteries.
> The S406 and S407 power supplies are available as chassis only versions for mounting into existing enclosures of various sizes to suit different battery capacities.
> The S406/S407 power supply/battery charger has been developed using switched mode technology to produce an efficient and lightweight power unit for a host of fire alarm applications.
> Suited to almost any application, the S406/S407 is designed to be a universal power source which will reduce spares stock holding and increase serviceability of systems.
> The comprehensive monitoring features of the S406 include true battery present detection, low battery voltage warning, battery overcharge warning and low battery shut off. The S407 features include true battery present detection, low battery voltage warning and mains fail warning.
>These features combined with the temperature compensated charger output will increase the service life of sealed lead acid batteries.
> The S406 and S407 power supplies are available as chassis only versions for mounting into existing enclosures of various sizes to suit different battery capacities.
10.25A PSU
EN54-4 Compliant 10.25 Amp Power Supply
> The S408 is an EN54-4 compliant, universal input switching power supply capable of delivering a full 240W of continuous power for fire alarm systems.
> Suitable for charging a range of sealed lead acid batteries from 7Ah to 38Ah, the S408 power supply features complete monitoring of primary and secondary power sources with fully temperature compensated battery charging and battery high impedance monitoring.
> The S408 power supplies are available as chassis only units or mounted in a range of enclosures suitable for various sizes of battery.
> The S408 is an EN54-4 compliant, universal input switching power supply capable of delivering a full 240W of continuous power for fire alarm systems.
> Suitable for charging a range of sealed lead acid batteries from 7Ah to 38Ah, the S408 power supply features complete monitoring of primary and secondary power sources with fully temperature compensated battery charging and battery high impedance monitoring.
> The S408 power supplies are available as chassis only units or mounted in a range of enclosures suitable for various sizes of battery.
Warning Signs
Illuminated Signs using high intensity LED indicators
> The new range of illuminated warning signs employ the very latest in LED technology to provide a high reliability, high brightness, audio/ visual warning indication unit.
> The brightness of the sign remains constant over its entire operating range of 15 to 30 volts DC due to the unique “power boost” circuitry employed. This ensures that even with a system running on depleted batteries, all signs remain at full intensity.
> A range of standard text signs are available and customised text and languages are easily accommodated due to the unique method employed to apply the lettering.
> The split level design allows one message to be displayed in the top half of the sign and an additional message to be displayed in the bottom half of the sign allowing for two stage warnings for systems such as extinguishing protection systems.
> The new range of illuminated warning signs employ the very latest in LED technology to provide a high reliability, high brightness, audio/ visual warning indication unit.
> The brightness of the sign remains constant over its entire operating range of 15 to 30 volts DC due to the unique “power boost” circuitry employed. This ensures that even with a system running on depleted batteries, all signs remain at full intensity.
> A range of standard text signs are available and customised text and languages are easily accommodated due to the unique method employed to apply the lettering.
> The split level design allows one message to be displayed in the top half of the sign and an additional message to be displayed in the bottom half of the sign allowing for two stage warnings for systems such as extinguishing protection systems.
Tamper Resistant Vision Window
Retrofit for any M2, H2, M3 and H3 size control panels
> The Tamper Resistant Vision Window is perfect for public areas where restricted access is necessary to prevent damage and unauthorised operation of the control panel. The cover features a fully welded steel construction and key lockable inner door making it robust and secure.
> The Vision Window is available from stock, fully assembled, and can be fitted on site in minutes by simply taking out the hinge pins on the existing enclosure, removing the lid before fitting the new Vision Window cover and hinge pins.
> Control panels can also be supplied pre-fitted with the Vision Window. This applies to any M2, H2, M3, and H3 size control panels. Please contact our sales department for prices.
> The Tamper Resistant Vision Window is perfect for public areas where restricted access is necessary to prevent damage and unauthorised operation of the control panel. The cover features a fully welded steel construction and key lockable inner door making it robust and secure.
> The Vision Window is available from stock, fully assembled, and can be fitted on site in minutes by simply taking out the hinge pins on the existing enclosure, removing the lid before fitting the new Vision Window cover and hinge pins.
> Control panels can also be supplied pre-fitted with the Vision Window. This applies to any M2, H2, M3, and H3 size control panels. Please contact our sales department for prices.
Plant Isolate / Audio Visual
Audible and Visual Indicator Units
> A range of indicator units with either red or yellow indicators to provide audible and visual status of alarms, isolations or other functions associated with the fire alarm or other systems.
> These units are available with a keyswitch to silence the internal buzzer or a keyswitch to illuminate the indicator and buzzer and provide a volt free contact for ancillary control functions when the keyswitch is operated.
> The units are supplied with standard labels but are easily customisable using an online bespoke label template.
> All units mount to a UK style, single gang back box or can mount to standard surface or flush single gang mounting boxes.
> A range of indicator units with either red or yellow indicators to provide audible and visual status of alarms, isolations or other functions associated with the fire alarm or other systems.
> These units are available with a keyswitch to silence the internal buzzer or a keyswitch to illuminate the indicator and buzzer and provide a volt free contact for ancillary control functions when the keyswitch is operated.
> The units are supplied with standard labels but are easily customisable using an online bespoke label template.
> All units mount to a UK style, single gang back box or can mount to standard surface or flush single gang mounting boxes.
Sigma DocBox
Document Enclosure
> Another addition to the Kentec range, the document box is designed to complement the design & colour of the Sigma CP range of control panels. The standard version Document Box will hold up to 50 A4 sheets of information on the Fire Detection or other security systems within a premises. The deep version will hold up to 100 sheets. The "Doc Box" also doubles up as a Key Box providing 7 easily accessible formed key hooks inside the enclosure.
> Another addition to the Kentec range, the document box is designed to complement the design & colour of the Sigma CP range of control panels. The standard version Document Box will hold up to 50 A4 sheets of information on the Fire Detection or other security systems within a premises. The deep version will hold up to 100 sheets. The "Doc Box" also doubles up as a Key Box providing 7 easily accessible formed key hooks inside the enclosure.
Sigma A-CP Annunciator
Conventional Annunciator Panel
> The Sigma A-CP Annunciator provides remote status indications of the Sigma A-CP Fire Control Panel for fire, trouble and supervisory conditions. Status indications for 8 zones are provided on the annunciator, but it is also compatible with 2 and 4 zone control panels. Zone LED indicators and Status LED indicators are synchronized to light at identical rates. The Sigma A-CP Annunciator includes an internal sounder and an automatic control for adjusting the lamp intensity of the Power and Trouble LEDs on the fascia of the unit.
> The annunciator provides connections for 24 VDC power and RS 485 communication. The RS 485 Bus supports maximum of 7 Sigma A-CP Annunciators. The Sigma A-CP Annunciator includes a dip switch for addressing and an End Of Line Resistor (EOLR). LEDs are included inside the annunciator for monitoring heart beat, error, transmit and receive conditions. The fascia and back- box of the Sigma A-CP Annunciator is provided in colours of grey or red.
> The user can write specific zone description on the labels to the right of the zone LED’s.
> The Sigma A-CP Annunciator provides remote status indications of the Sigma A-CP Fire Control Panel for fire, trouble and supervisory conditions. Status indications for 8 zones are provided on the annunciator, but it is also compatible with 2 and 4 zone control panels. Zone LED indicators and Status LED indicators are synchronized to light at identical rates. The Sigma A-CP Annunciator includes an internal sounder and an automatic control for adjusting the lamp intensity of the Power and Trouble LEDs on the fascia of the unit.
> The annunciator provides connections for 24 VDC power and RS 485 communication. The RS 485 Bus supports maximum of 7 Sigma A-CP Annunciators. The Sigma A-CP Annunciator includes a dip switch for addressing and an End Of Line Resistor (EOLR). LEDs are included inside the annunciator for monitoring heart beat, error, transmit and receive conditions. The fascia and back- box of the Sigma A-CP Annunciator is provided in colours of grey or red.
> The user can write specific zone description on the labels to the right of the zone LED’s.
Sigma A-XT
Extinguishant Control Panel
> Designed and manufactured to the highest standards in a quality controlled environment and with UL and FM approvals, the Sigma A-XT releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
> With three initiation circuits as standard, release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
> The extensive configuration options of the Sigma A-XT allow the functionality of the system to be extensively modified.
> The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until release for added user safety.
> The countdown timer is duplicated on up to seven remote status units to provide local indication of the system status.
> With all of the electronics mounted on a single, easily removable, steel plate Sigma A-XT panels are both robust and easy to install.
> Sigma A-XT is supplied in an enclosure that matches the design and color of the Elite RS range and is available in standard red or optional gray.
> Designed and manufactured to the highest standards in a quality controlled environment and with UL and FM approvals, the Sigma A-XT releasing panel offers outstanding value and performance for all small to medium fixed firefighting installations.
> With three initiation circuits as standard, release can be configured to activate from any combination of detection zone inputs to allow (among other combinations) any two from three type activations such as would be required for detection in ceiling void, room and floor void applications.
> The extensive configuration options of the Sigma A-XT allow the functionality of the system to be extensively modified.
> The panel contains a large LED display to enable easy configuration and control which also displays the time remaining until release for added user safety.
> The countdown timer is duplicated on up to seven remote status units to provide local indication of the system status.
> With all of the electronics mounted on a single, easily removable, steel plate Sigma A-XT panels are both robust and easy to install.
> Sigma A-XT is supplied in an enclosure that matches the design and color of the Elite RS range and is available in standard red or optional gray.
Custom Build
The Custom Specialists
> Kentec Electronics Limited specialise in producing custom built fire alarm control equipment within a rigorous, ISO9001:2000 quality controlled environment. Since the company was formed in 1985, there has been a department specifically devoted to advising customers on special fire alarm equipment needs and producing designs, approval drawings and final documentation accordingly. Today this department consists of four full time staff dedicated to offering mechanical, electrical/electronic and graphic design using the latest Computer Aided Design techniques. With electrical, graphic and mechanical design, sheet metalwork, powder coating, silk screen printing, electrical wiring and testing facilities under one roof at our Dartford based factories Kentec are able to produce custom control equipment from concept to delivery with short lead times. Our sales staff are trained to guide customers who have special equipment needs and can advise on the correct type of equipment to meet specific engineering or architectural requirements.
> Kentec Electronics Limited specialise in producing custom built fire alarm control equipment within a rigorous, ISO9001:2000 quality controlled environment. Since the company was formed in 1985, there has been a department specifically devoted to advising customers on special fire alarm equipment needs and producing designs, approval drawings and final documentation accordingly. Today this department consists of four full time staff dedicated to offering mechanical, electrical/electronic and graphic design using the latest Computer Aided Design techniques. With electrical, graphic and mechanical design, sheet metalwork, powder coating, silk screen printing, electrical wiring and testing facilities under one roof at our Dartford based factories Kentec are able to produce custom control equipment from concept to delivery with short lead times. Our sales staff are trained to guide customers who have special equipment needs and can advise on the correct type of equipment to meet specific engineering or architectural requirements.
Syncro ASM
Marine & Offshore Single or Two Loop Analogue Addressable Fire Control Panels
> Syncro ASM analogue addressable, fire control panels are available from Kentec Electronics Limited with Germanischer Lloyd, Det Norske Veritas, Korean Register, Nippon Kaiji Kyokai and China Classification type approval for a wide range of marine fire alarm system applications. This now includes Marine Equipment Directive Approval MED. The Syncro ASM is one of the First Fire Control Panels to meet this European recognized Classification type approval in the world
> Compatible with the complete range of Apollo or Hochiki marine approved detection devices, Syncro ASM fire control panels can be networked to provide scalable fire alarm systems, suitable for many types of vessel.
> The large clear display, simple intuitive controls and compact, unobtrusive enclosure of Syncro ASM fire control panels have been popular with installers and users of land based fire systems for many years and are now set to become a favourite in the marine environment.
> Feature rich with a 3 Amp power supply and highly configurable via the simple Windows® based, Loop Explorer configuration utility, Syncro ASM fire control panels are suitable for a wide range of marine fire alarm system applications.
> Syncro ASM analogue addressable, fire control panels are available from Kentec Electronics Limited with Germanischer Lloyd, Det Norske Veritas, Korean Register, Nippon Kaiji Kyokai and China Classification type approval for a wide range of marine fire alarm system applications. This now includes Marine Equipment Directive Approval MED. The Syncro ASM is one of the First Fire Control Panels to meet this European recognized Classification type approval in the world
> Compatible with the complete range of Apollo or Hochiki marine approved detection devices, Syncro ASM fire control panels can be networked to provide scalable fire alarm systems, suitable for many types of vessel.
> The large clear display, simple intuitive controls and compact, unobtrusive enclosure of Syncro ASM fire control panels have been popular with installers and users of land based fire systems for many years and are now set to become a favourite in the marine environment.
> Feature rich with a 3 Amp power supply and highly configurable via the simple Windows® based, Loop Explorer configuration utility, Syncro ASM fire control panels are suitable for a wide range of marine fire alarm system applications.
About us
Kentec Electronics established 30 years ago, are world leaders in the manufacture of safety control systems. Based in Kent, we have grown quickly over the years and now supply and export control equipment to more than 80 countries worldwide.
Kentec have a range of Analogue Addressable, Conventional and Extinguishant Control Panels along with Power Supplies and other sundries. Kentec also offer a highly regarded custom build service, allowing for high quality built products, manufactured to customer’s exact specifications. We now offer products specifically designed for the Marine industry.
Kentec have recently expanded our facility in Dartford to allow for new and improved machinery, improvements to our paint shop and in-house print room and more. All improvements have been made to ensure new product innovation, continued high quality products and on time delivery.
We have invested not just in the factory but in our staff. To ensure our customers receive high levels of customer service and care, our team of dedicated trainers are on hand to provide customers with product training both onsite and offsite, within the UK and overseas. We also have a team of experienced and friendly personnel, ready to provide telephone assistance for any advice, questions or problems you may have. Due to customer demand we have recently opened a new training room.
Kentec have a range of Analogue Addressable, Conventional and Extinguishant Control Panels along with Power Supplies and other sundries. Kentec also offer a highly regarded custom build service, allowing for high quality built products, manufactured to customer’s exact specifications. We now offer products specifically designed for the Marine industry.
Kentec have recently expanded our facility in Dartford to allow for new and improved machinery, improvements to our paint shop and in-house print room and more. All improvements have been made to ensure new product innovation, continued high quality products and on time delivery.
We have invested not just in the factory but in our staff. To ensure our customers receive high levels of customer service and care, our team of dedicated trainers are on hand to provide customers with product training both onsite and offsite, within the UK and overseas. We also have a team of experienced and friendly personnel, ready to provide telephone assistance for any advice, questions or problems you may have. Due to customer demand we have recently opened a new training room.
