Company details for:
Ronacrete Ltd
Ronac House,
Flex Meadow,
Merring Way,
Harlow,
Essex,
CM19 5TD,
United Kingdom
Quick Links:
Products / Services

RonaBond Concrete Repair Mortar
Conforms to BS EN 1504-3
Excellent long term durability - will last as long as the surrounding concrete
Provides protection to steel reinforcement from carbonation
Frostproof
Compressive strength in excess of 45N/mm2
Suitable for structural and cosmetic repairs
Approved by WRC for use in contact with potable water

RonaBond Flowable Micro Concrete
Conforms to BS EN 1504-3
High strength flowable micro concrete
Free flows in to shuttering and formwork
Shrinkage compensated
Protects steel reinforcement
Can be trowelled, poured or pumped

RonaBond HB25
Conforms to BS EN 1504-3
High build repair mortar
High build repairs to 75mm
Application from 6mm
Pre-packed formulations offer assurance of consistent high performance
Smooth surface finish prior to application of protective/decorative coating
Monolithic adhesion

RonaBond HB40
Conforms to BS EN 1504-3
High build repairs to 75mm
Application from 6mm
Pre-packed formulations offer assurance of consistent high performance
Use for structural concrete repair, dubbing out
Excellent for thick section soffit work
Smooth surface finish prior to application of protective/decorative coating
Suitable for use in contact with potable water

RonaBond Anti-Carbonation Coating WB
Excellent CO2 resistance
High resistance to UV degradation
Excellent vapour permeability
Permanent flexibility
Water based−environmentally friendly
Smooth finish−low dirt retention
Suitable for facades and soffits
Large standard colour range

RonaBond Crack Bridging Anti-Carbonation Coating WB
High build anti-carbonation coating; excellent CO2 resistance
Excellent self-cleaning properties
Elastomeric & waterproof façade coating
Permanent flexibility
Dynamic crack accommodation up to 2mm
Water based
Matt finish

RonaBond Concrete Cover Elastic
protective coating for concrete
elastic - covers fine cracks
2mm application increases Equivalent Concrete Cover by 150mm
waterproof
easy to apply

RonaBond EasySkim FC
Conforms to BS EN 1504-2
1mm - 3mm application thickness
Fair-faced finish on walls and soffits
Covers minor blemishes
Apply by trowel
Apply prior to application of surface coating

RonaBond Re-Profiling Mortar
Conforms to BS EN 1504-3
Levelling mortar for prepared vertical and overhead surfaces
Can be applied from 3mm
Excellent resistance to shrinkage
Excellent substrate adhesion
Pre-packed for ease of use and consistent performance

RonaBond MCI
Proven to migrate to adjacent areas to protect surrounding metals
Enhances the durability of reinforced concrete
Allows concrete to breathe and vapour to diffuse, it is not a vapour barrier
Protects both anodic and cathodic areas
Does not require the removal of sound concrete
Does not contain any calcium nitrite
Water-based and non-flammable for easy handling
Organic, safe and environmentally friendly
No cure time is required

Ronafix for Waterproofing
Conforms to BS EN 934-2 and 934-3
Suitable waterproofing and tanking renders
Admixture for site batched renders
Application from 6mm
Excellent resistance to passage of water and water vapour

Ronafix Pre-packed Tanking Render
Conforms to BS EN 988-1
Pre-packed mortar for waterproof / tanking renders
Hand or spray applied tanking render
Suitable for use in basements, swimming pools, vaults, and other areas where tanking is required
Application from 6mm
High compressive, flexural and tensile strength
Pre-packed for increased confidence
Trafficable after 24 hours

Ronafix Pre-packed Render / Screed
Pre-packed mortar for weatherproof renders and screeds
Application from 6mm
High compressive strength
High tensile strength
High flexural strength
Pre-packed for increased confidence
Trafficable after 24 hours

Ronacrete AR Glass Fibre Mesh
high zirconia content provides alkali resistance
polymer content aids net stability
high tensile strength
binds well with cementitious mortars & coatings
easy to position
rot proof
corrosion proof
non hazardous

Monoprufe DPM
Conforms to BS EN 1504-2
Water based membrane system
Reduces water and water vapour permeability
Designed to accept thin bonded screeds
Suitable for use prior to application of tiles, soft flooring or wood flooring to screeds which are not fully dry
Quick drying two or three coat application
Non hazardous, solvent free, low odour
Easy to mix and apply

Monoprufe WP Elastic
Water based elastomeric membrane system
Reduces water and water vapour permeability
Designed to accept thin bonded screeds
Suitable for use in below ground structures
Highly elastic - elongation at break 180%
Quick drying two or three coat application
Non-hazardous, solvent free, low odour
Easy to mix and apply
Compatible with most Ronacrete screed and topping systems

RonaDeck EcoAgg
SuDS compliant−highly permeable paving
UV stable resin will not discolour
Apply directly on to compacted MOT Type 3
Natural aggregates
Alternative to conventional paving
Flexible
Installed by approved contractors
Low maintenance

RonaDeck EcoPath UV
SuDS compliant−highly permeable
UV stable - will not discolour or degrade upon exposure to UV light
Flexible
Incorporates recycled rubber from discarded truck tyres
Low maintenance
Highly decorative
Installed from 35mm on to compacted MOT Type 1 or Type 3
Available in a range of finishes

RonaDeck Resin Bound Surfacing
Formulated using aliphatic resin which is resistant to UV light and will not degrade upon exposure
Slip resistant - tested to BS 8204-6:2008+A1:2010 Appendix B
SuDS compliant - highly permeable
Application from 15mm
Highly decorative surfacing
Used for pathways, pool surrounds, driveways and car parks
Low maintenance
Available in a wide variety of colours

RonaDeck Thixotropic Surface Sealer
Polymeric water based gel
Squeegee applied pore sealer
Apply to RonaDeck Stone Carpet and RonaDeck Resin Bound Surfacing products
Reduces the porosity of surfacings
Simple to use, single component product
Typical 3 layer application

RonaDeck Stone Carpet
Resin bound aggregate system for decorative internal floor surfacing
UV stable resin will not yellow or darken
Exposed natural or coloured aggregate finish
Quieter than other hard floorings
Warmer than other hard floorings
More comfortable under foot than other hard floorings
Easily cleaned
Very durable
Anti-slip surface dressing available for wet areas

RonaDeck Resin Bonded Surfacing
Rapid cure resin
High slip resistance - tested to BS 8204-6:2008+A1:2010 Appendix B
DDA compliant
Self priming on asphalt and concrete
Highly decorative
Suitable for pedestrian and vehicular traffic
Thin surface dressing
Available in a wide range of finishes

RonaDeck Resin Bonded Pore Filler
Scrape on / scrape off pore filler
Use prior to RonaDeck Resin Bonded Surfacing
Reduces amount of resin needed on open face surfaces
Quick curing
Allows overlay within 1-2 hours
Easy to use

RonaDeck Resin Bonded Scratch Coat
Scrape on / scrape off scratch coat
Use prior to RonaDeck Resin Bonded Surfacing
Reduces amount of resin needed on open face surfaces
Quick curing
Allows overlay within 1-2 hours
Easy to use

RonaDeck Resin Bonded Seal Coat UV
Clear polyurethane coating
UV stable
Sealer for RonaDeck Resin Bonded Surfacing • improved aggregate retention
Increased abrasion and frost resistance
Improved chemical resistance and ease of cleaning
1 or 2 coat application
Ready to use
About us
Passionate providers of bespoke concrete repair and screed solutions, Ronacrete are proud to be the UK’s number one supplier of world class products that are guaranteed to benefit any organisation within any industry. With over 45 years’ experience in the design and distribution of high-quality surfacing methods that are second to none, our company has been at the top of the market for almost half a century. Our desire to achieve excellence as well as improve our own technical knowledge and skill has allowed our reputation to grow significantly in recent years.

Sponsored Links
Articles / Press Releases
Reviews
Trade Associations

