Company details for:
Rowan Almond Ltd
(0)
9 Old Lansdowne Road,
Manchester,
Greater Manchester,
M20 2PB,
United Kingdom
Quick Links:
Products
LuxR Modux Micro Spike Spot
The LuxR Modux Micro Spike Spot is a miniature low-voltage dimmable outdoor spike spot light. It’s like a 16cm pencil that is particularly easy to install. Simply push into the soil and orientate as required. Ideal for illuminating smaller trees or shrubs. Simply plant and orient. This fitting is ideal for planters and larger pots. Precision machined in marine grade 316 stainless steel or from copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width (see specifications).
LuxR Modux Micro Recessed Spot
The LuxR Modux Micro Recessed Spot is a miniature low-voltage dimmable outdoor walkover marker light with optional canister. Illumination is directed through four interchangable beam angles − ideal for marking boundaries, crosslighting paths, washing across steps or uplighting walls and columns.
Due to the small recess (20mm x 31mm) is is ideal for positioning low down into walls to wash a tight beam across a step.
Precision machined in marine grade 316 stainless steel or from copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
Due to the small recess (20mm x 31mm) is is ideal for positioning low down into walls to wash a tight beam across a step.
Precision machined in marine grade 316 stainless steel or from copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
LuxR Modux Micro Step Light
The LuxR Micro Recessed Steplight is a miniature low-voltage dimmable outdoor washer, with optional canister. The fixture is designed to be mounted either in the ground or wall to illuminate paths, or wash walls and steps. Illumination is directed through the single facet 180° flange which projects light outwards and downwards to create an even wash across any surface.
This small walkover stud protrudes just 9mm with a 31.5mm diameter. Ideal for lighting Paths or Steps or for use to mark the edge of driveways. There is no upward light − just a horizontal wash in one direction.
Precision machined in marine grade 316 stainless steel or from copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
This small walkover stud protrudes just 9mm with a 31.5mm diameter. Ideal for lighting Paths or Steps or for use to mark the edge of driveways. There is no upward light − just a horizontal wash in one direction.
Precision machined in marine grade 316 stainless steel or from copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
LuxR Modux Micro Path Light
The LuxR Micro Recessed Pathlight is a miniature low-voltage dimmable outdoor washer, with optional canister. Illumination is produced through a the 3 facet 360° flange that projects light outwards and downwards to create an even wash across the ground or floor to illuminate paths.
This small walkover stud protrudes just 9mm with a 31.5mm diameter. Ideal for lighting Paths or Steps or for use to mark the edge of driveways. There is no upward light − just a horizontal wash.
Precision machined in marine grade 316 stainless steel or from solid copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout
This small walkover stud protrudes just 9mm with a 31.5mm diameter. Ideal for lighting Paths or Steps or for use to mark the edge of driveways. There is no upward light − just a horizontal wash.
Precision machined in marine grade 316 stainless steel or from solid copper the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout
LuxR Modux 1 Wayfinder
The Modux One Wayfinder is a 1 inch diameter miniature pole marker light producing plenty of light creating an assymetric wash, without glare. Precision machined in marine grade 316 stainless steel, copper, or powder coated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind.
It has a truly unique optic that orients and produces its asymmetric light distribution in a perfect wash. No light is emitted above the horizontal meaning no glare. It is particularly suited to washing paths, low planting, and small areas of hard standing. Ideal for placing in borders or against hedging to light pathways. It is also very useful for lighting steps that have no side wall.
The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The regular pole length is 600mm however a custom length is available on request.
This fitting is one of the most popular in the LuxR range and has proved to be extremely reliable, attractive by day or night, and functional − it does what it says.
It has a truly unique optic that orients and produces its asymmetric light distribution in a perfect wash. No light is emitted above the horizontal meaning no glare. It is particularly suited to washing paths, low planting, and small areas of hard standing. Ideal for placing in borders or against hedging to light pathways. It is also very useful for lighting steps that have no side wall.
The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The regular pole length is 600mm however a custom length is available on request.
This fitting is one of the most popular in the LuxR range and has proved to be extremely reliable, attractive by day or night, and functional − it does what it says.
LuxR Modux 1 Round Recessed
The Modux One Round Recessed is a very small low-voltage dimmable outdoor spot light typically producing 80 lumens.
Ideal for washing across steps, lighting up gate piers, or for use as a marker light.
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
Ideal for washing across steps, lighting up gate piers, or for use as a marker light.
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind. The Cree 1 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
LuxR Modux 2 Recessed Wall Washer
The LuxR Modux Two Recessed Wall Washer is a small low-voltage dimmable outdoor light for washing up with a uniform light. This is a very popular fitting and can be used in soft or hard standing. Light is emitted at an angle so all the light emitted is utilised rather than a percentage washing up into thin air. Use to light gate piers, plant specimens, artworks, walls etc. etc.
Designed primarily to be recessed into floors or hard standing, its state of the art optic creates a subtle wash of light with excellent beam uniformity. It can also be mounted in walls to wash floor surfaces or steps. Just 58mm in diameter, the Modux 2 Wall Washer produces a light output of 130 lumens @ 2 watts (700ma) and can be over-driven safely at 3 Watts maximum (1050ma) for more output. A constant current driver is required for these fittings which are connected in series.
The pin mounted Cree 2 watt max LED can be easily replaced if required or substituted for a colour LED. The luminaire can be mounted very close to the wall and still achieve a good result.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
Designed primarily to be recessed into floors or hard standing, its state of the art optic creates a subtle wash of light with excellent beam uniformity. It can also be mounted in walls to wash floor surfaces or steps. Just 58mm in diameter, the Modux 2 Wall Washer produces a light output of 130 lumens @ 2 watts (700ma) and can be over-driven safely at 3 Watts maximum (1050ma) for more output. A constant current driver is required for these fittings which are connected in series.
The pin mounted Cree 2 watt max LED can be easily replaced if required or substituted for a colour LED. The luminaire can be mounted very close to the wall and still achieve a good result.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
LuxR Modux 2 Spot Bracket Mount
The Modux Two Spot Bracket Mount is a very small low-voltage dimmable outdoor spot light on a stiff metal bracket for installing onto any surface with a 4mm diameter screw. The fully adjustable spot light produces 170 lumens.
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind. The Cree 2 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver (700ma maximum) is required for these fittings which are connected in series.
A Hexcell baffle can also be added to reduce sideways glare − see LuxR Accessories.
The Spot Bracket Mount is also available in the Modux One and Modux Four ranges
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind. The Cree 2 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver (700ma maximum) is required for these fittings which are connected in series.
A Hexcell baffle can also be added to reduce sideways glare − see LuxR Accessories.
The Spot Bracket Mount is also available in the Modux One and Modux Four ranges
LuxR Modux 2 Recessed Path Light 1 to 4 Facets
This luminaire is available with 5 different flange options.
The LuxR M2 Recessed Pathlight is a very small low-voltage dimmable path light that produces a wash distribution 5° below the flange lip, and 10° above. It can be used to illuminate a wall surface, or as a path light wayfinder among other applications.
Precision machined in marine grade 316 stainless steel, copper or powdercoated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind.
The Cree 2 watt max LED produces 170 lumens when run at a 700ma. It can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver is required for these fittings which are connected in series.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
The LuxR M2 Recessed Pathlight is a very small low-voltage dimmable path light that produces a wash distribution 5° below the flange lip, and 10° above. It can be used to illuminate a wall surface, or as a path light wayfinder among other applications.
Precision machined in marine grade 316 stainless steel, copper or powdercoated aluminium, the luminaire achieves IP68 water ingress rating for peace of mind.
The Cree 2 watt max LED produces 170 lumens when run at a 700ma. It can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver is required for these fittings which are connected in series.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout.
LuxR Modux 4 Round Recessed
The Modux Four Round Recessed is a small dimmable outdoor spot light with an integral LED module typically producing 360 lumens.
Ideal for washing up buildings, walls, columns or trees.
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 4 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver (700ma maximum) is required for these fittings which are connected in series.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout. A Hexcell or Half Baffle can also be added to reduce sideways glare if required − see LuxR Modux Accessories.
Ideal for washing up buildings, walls, columns or trees.
Precision machined in marine grade 316 stainless steel, copper or powder coated aluminium, the luminaire achieves IP68 water ingress rating for piece of mind. The Cree 4 watt max LED can be easily replaced if required or substituted for a colour LED. The optic is also simple to change if you wish to alter the beam width. A constant current driver (700ma maximum) is required for these fittings which are connected in series.
A sturdy PVC mounting canister is available for use with this product to facilitate installation. This product is linked and will show during checkout. A Hexcell or Half Baffle can also be added to reduce sideways glare if required − see LuxR Modux Accessories.
Hunza Spike Spot Adjustable 12 Volt
The Hunza Spike Spot Adjustable along with the Pure LED version of this fitting is perhaps the most popular fitting in the whole range. It has a fully adjustable head allowing for 360 degree rotation and 0 − 90 degree elevation. This versatile garden light is easily inserted into the ground via a 145mm spike for uplighting bushes, small trees, statues and planters etc. It is a useful inclusion into any landscape lighting scheme and is the best selling fitting in the range. Available in powder coated aluminium, solid copper, or 316 stainless steel.
It is recommended to use a retrofit 12volt LED lamp with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site. It can also be used with a 12volt halogen − 20, 35 or max. 50 watt lamp. By default this fitting comes supplied as standard complete with a high quality 20 watt European halogen lamp. A transformer or constant voltage driver will be required with this 12 volt fitting.
The Spike Spot can also be fitted with a Glare Guard if required. This linked product will also show during checkout.
The Hunza Spike Spot Adjustable is also available in a GU10 version for connection direct to Mains power or with Pure Integral LED.
It is recommended to use a retrofit 12volt LED lamp with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site. It can also be used with a 12volt halogen − 20, 35 or max. 50 watt lamp. By default this fitting comes supplied as standard complete with a high quality 20 watt European halogen lamp. A transformer or constant voltage driver will be required with this 12 volt fitting.
The Spike Spot can also be fitted with a Glare Guard if required. This linked product will also show during checkout.
The Hunza Spike Spot Adjustable is also available in a GU10 version for connection direct to Mains power or with Pure Integral LED.
Hunza Bollard 700 Pure LED
The Hunza Bollard 700 Pure LED is ideal for exterior lighting such as driveways, path lighting, parking areas, etc. The lens reflects light at two angles through an anti-glare mesh directly onto the ground and horizontally to illuminate the surrounding landscape.
This bollard is by default tapered at the base to ease insertion into soft standing. If the ground is very soft or a superior purchase is required the bollard can be set into concrete or a better option is to use a Floor Canister with the bollard − this canister will show up during checkout and can be added if required. The Bollard is also available with a flange mount for fixing to hard standing.
It is constructed of tubular aluminium with a UV stable powdercoated finish, machined from solid copper, or machined from 316 stainless steel. It has a mirror finished twin angle reflector and UV stable acrylic lens with anti-glare mesh. This gives no upwards light but generates a soft glare free pool of light surrounding the bollard.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire. A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Bollard 700 is also available in a 12 volt version or a GU10 version for connection direct to mains.
This bollard is by default tapered at the base to ease insertion into soft standing. If the ground is very soft or a superior purchase is required the bollard can be set into concrete or a better option is to use a Floor Canister with the bollard − this canister will show up during checkout and can be added if required. The Bollard is also available with a flange mount for fixing to hard standing.
It is constructed of tubular aluminium with a UV stable powdercoated finish, machined from solid copper, or machined from 316 stainless steel. It has a mirror finished twin angle reflector and UV stable acrylic lens with anti-glare mesh. This gives no upwards light but generates a soft glare free pool of light surrounding the bollard.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire. A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Bollard 700 is also available in a 12 volt version or a GU10 version for connection direct to mains.
Hunza Lawn Lite Pure LED
The Hunza Lawn Lite Pure LED is designed for insertion into a lawn or garden bed and can be mowed over without damaging the luminaire. Designed so the lamp can be directed up to 20 degrees at a bush, tree, or the outside of a building, etc. without the need to remove the luminaire from the ground due to the vandal-resistant three stainless steel allen head screw fixing system which attaches the flange to the body of the luminaire. The design incorporates a ‘Flush Fit’ lens to stop water pooling and depositing dirt on the lens.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire. A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Lawn Lite is also available in a 12 volt version or a GU10 version for connection direct to mains.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire. A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Lawn Lite is also available in a 12 volt version or a GU10 version for connection direct to mains.
Hunza Mouse Lite Pure LED
The Hunza Mouse Lite Pure LED is a solid bronze or solid 316 stainless steel luminaire for surface mounting. A versatile product that can be used in many ways; mounted horizontally for path lighting or deck lighting; mounted vertically for downlighting over a doorway or uplighting a wall mounted feature.
The shape is pleasing to the eye and blends unobtrusively into any situation. A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity.
Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Mouse Lite is also available in a 12volt version or G9 version for connection direct to mains.
The shape is pleasing to the eye and blends unobtrusively into any situation. A space in the wall behind the luminaire is not required for a cable connection due to the design which includes a cable junction cavity.
Individually cast in bronze, each luminaire has a unique finish and identity and the 316 Stainless Steel has a smooth machined finish both with frosted tempered glass lens and high temperature gasket.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Hunza Mouse Lite is also available in a 12volt version or G9 version for connection direct to mains.
Hunza Pole Spot Pure LED
The Hunza Pole Spot Pure LED has a fully adjustable head allowing for 360 degree rotation and 0 − 90 degree elevation. This versatile garden light is easily inserted into the ground via a 145mm spike for uplighting bushes, small trees, statues and planters etc. It is a useful inclusion into any landscape lighting scheme. Available in powder coated aluminium, solid copper, or 316 stainless steel.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Pole Spot can also be fitted with a Glare Guard if required. This linked product will show during checkout.
The Hunza Pole Spot is also available in a 12volt version or GU10 version for connection direct to mains.
The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Pole Spot can also be fitted with a Glare Guard if required. This linked product will show during checkout.
The Hunza Pole Spot is also available in a 12volt version or GU10 version for connection direct to mains.
Hunza Stake Spot Adjustable Pure LED
The Hunza Stake Spot Adjustable has been designed for easy installation into the earth. It has a fully adjustable head allowing 360° rotation and 0−90° elevation. This versatile garden lighting product is easily inserted into the ground via a 145mm spike for uplighting bushes, small trees, statues and planters etc. A useful inclusion into any landscape lighting scheme.
Machined from 10mm thick aluminium with a UV stable powdercoated finish, solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Stake Spot can also be fitted with a Glare Guard if required. This linked product will show during checkout.
Machined from 10mm thick aluminium with a UV stable powdercoated finish, solid copper or 316 stainless steel, clear tempered glass lens and high temperature silicon gaskets. The PURE LED system is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
A constant current driver is required for this fitting maximum 1050ma. See the LED Drivers page on this site.
The Stake Spot can also be fitted with a Glare Guard if required. This linked product will show during checkout.
Hunza Pillar Lite GU10
The Hunza Pillar Lite GU10 performs both uplighting and downlighting illumination, giving columns, gateway pillars and entrances a dramatic effect.
Machined from 10mm thick aluminium with a 78mm diameter mounting base, complete with stainless steel screws and is available in either a UV stable powdercoated finish, solid copper or 316 stainless steel with high temperature silicon gaskets.
Glare guards can be used both top and bottom with this fitting − this not only reduces the glare but in our opinion enhances the appearance of this product. The glare guard is linked to this fitting and will show during checkout.
It is recommended to use two retrofit GU10 LED lamps with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
The Hunza Pillar Lite is also available in a 12 Volt version or with Pure Integral LED.
Machined from 10mm thick aluminium with a 78mm diameter mounting base, complete with stainless steel screws and is available in either a UV stable powdercoated finish, solid copper or 316 stainless steel with high temperature silicon gaskets.
Glare guards can be used both top and bottom with this fitting − this not only reduces the glare but in our opinion enhances the appearance of this product. The glare guard is linked to this fitting and will show during checkout.
It is recommended to use two retrofit GU10 LED lamps with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
The Hunza Pillar Lite is also available in a 12 Volt version or with Pure Integral LED.
Hunza Pillar Pagoda Lite GU10
The Hunza Pillar Pagoda Lite GU10 (also referred to as the Dual Liter) is the hybrid child of the Pillar Lite and the Pagoda Lite. This broadens the applications and potential for this exterior lighting product.
This fitting offers two different lighting effects in one luminaire: a spread effect from the top acrylic lens and a shaft of light through the bottom lens.
The top lens is manufactured from high UV stable acrylic with stainless anti-glare mesh giving a soft illumination. The fitting is available in powder coated aluminium, solid copper, or 316 stainless steel.
A glare guard can be used and is linked to this fitting and will show during checkout.
It is recommended to use two retrofit GU10 LED lamps with this fitting.
Suitable LED lamps are linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
The Hunza Pillar Pagoda Lite is also available in a 12 Volt version or with Pure Integral LED.
This fitting offers two different lighting effects in one luminaire: a spread effect from the top acrylic lens and a shaft of light through the bottom lens.
The top lens is manufactured from high UV stable acrylic with stainless anti-glare mesh giving a soft illumination. The fitting is available in powder coated aluminium, solid copper, or 316 stainless steel.
A glare guard can be used and is linked to this fitting and will show during checkout.
It is recommended to use two retrofit GU10 LED lamps with this fitting.
Suitable LED lamps are linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
The Hunza Pillar Pagoda Lite is also available in a 12 Volt version or with Pure Integral LED.
Hunza Wall Down Lite GU10
The Hunza Wall Down Lite GU10 has a fixed head. Suitable for mounting on timber, masonry, gate piers, stone, etc. this luminaire is ideal for direct downlighting on walls, doorways, fences etc. Alternatively it can be positioned low down for uplighting where it is not possible to use a spiked fitting. A diverse product that meets the demands of today’s exterior lighting schemes. Available in powder coated aluminium, solid copper, or 316 stainless steel.
It is recommended to use a retrofit 240volt GU10 LED lamp with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
It can also be used with a 240volt GU10 halogen lamp − 35 or max. 50 watt lamp.
A Glare Guard can also be fitted if required. This linked product will also show during checkout.
The Hunza Wall Down Lite GU10 is also available in a 12volt version or with Pure Integral LED.
It is recommended to use a retrofit 240volt GU10 LED lamp with this fitting.
A suitable LED lamp is linked to this product and will show during checkout.
Alternatively go to the LED Lamps page on this site.
It can also be used with a 240volt GU10 halogen lamp − 35 or max. 50 watt lamp.
A Glare Guard can also be fitted if required. This linked product will also show during checkout.
The Hunza Wall Down Lite GU10 is also available in a 12volt version or with Pure Integral LED.
Hunza High Power Pole Spot Pure LED
The Hunza High Power Pole Spot Pure LED has been designed for an easy installation into the earth and is ideal for illuminating a bush, tree or any landscape feature. The fully adjustable head allows 360° rotation and 0−90° elevation.
This luminaire is machined from solid aluminium with a UV stable powder coated finish. It features an extra clear, tempered, flush, low iron glass lens and high temperature silicon gaskets.
The PURE LED system used with the High Power range is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
This luminaire is machined from solid aluminium with a UV stable powder coated finish. It features an extra clear, tempered, flush, low iron glass lens and high temperature silicon gaskets.
The PURE LED system used with the High Power range is designed to provide the ultimate combination of light output, illumination control, and long-term performance from an outdoor-rated sealed luminaire.
Hunza − The Finest Outdoor Lights
Engineered in New Zealand from the best materials giving exceptional durability and sustainability.
Available as 12volt fittings for retrofit LED or Halogen lamps, mains fittings also for retrofit LED or Halogen lamps, or as Pure Integral LED fittings providing the ultimate combination of light output, illumination control, and long term performance.
Available as 12volt fittings for retrofit LED or Halogen lamps, mains fittings also for retrofit LED or Halogen lamps, or as Pure Integral LED fittings providing the ultimate combination of light output, illumination control, and long term performance.
The LuxR Range
The LuxR range of IP68 fully waterproof outdoor fittings are precision engineered by Hunza in New Zealand. These compact high quality integral LED outdoor lights have proved to be extremely reliable. The fittings have been designed with interchangeable LED modules and reflectors/optics and come in powder coated aluminium, 316 stainless steel or natural copper.
Gwyn Carless Design
A range of contemporary British hand made exterior lights crafted to the highest standards from hardwood and glass.
LED Drivers
IP rated constant current and constant voltage LED Drivers
Light Symphony
Smart Solutions for Professional Outdoor Lighting Control.
‘Light Symphony’ is a versatile and cost-saving wireless control system for your garden lighting and other outdoor electrical devices, such as pond, pool and water features.
The ‘Light Symphony’ range brings new levels of control and flexibility. Its long wireless range allows controllers to be positioned in the garden and powered from any source, thereby reducing cabling and digging, while offering fuller control. Its energy saving features and smart timers reduce running costs.
Controls are fully compatible with all makes and types of garden lighting, including LED, Low Voltage and colour changing LEDs. With a choice of remote control options including an ‘iPhone’ (or Android) application, ‘Keyfob’ and ‘Picture Touch Panel’, you’re sure to find a solution for all your outdoor control requirements.
‘Light Symphony’ is a versatile and cost-saving wireless control system for your garden lighting and other outdoor electrical devices, such as pond, pool and water features.
The ‘Light Symphony’ range brings new levels of control and flexibility. Its long wireless range allows controllers to be positioned in the garden and powered from any source, thereby reducing cabling and digging, while offering fuller control. Its energy saving features and smart timers reduce running costs.
Controls are fully compatible with all makes and types of garden lighting, including LED, Low Voltage and colour changing LEDs. With a choice of remote control options including an ‘iPhone’ (or Android) application, ‘Keyfob’ and ‘Picture Touch Panel’, you’re sure to find a solution for all your outdoor control requirements.
About us
With over 20 years of experience in designing and supplying garden lighting, Rowan Almond Ltd is the industry leader. In addition to working with architects, landscape architects, contractors, and direct with clients, we have experience working on both residential and commercial lighting projects, from small gardens to large estates, patios to shopping malls.
Our Products Include:
Rowan Almond Limited is a small family-run business. With over 25 years experience in the lighting industry, Rowan Almond has now become a trusted name. Working initially as a Sales Agent providing lighting solutions in the Exhibition and Retail sectors, Rowan formed his own company in 2002.
When given the opportunity to supply exterior lighting to an old friend who was a Landscape Architect another door opened, and the company soon started to specialise in top end landscape lighting products. Experience soon revealed that only quality products can survive the British weather, and the company became a distributor for LuxR and Hunza. These are some of the best outdoor lights in the world, developed in New Zealand from the finest materials.
Rowan has gained extensive experience working with architects, landscape architects, contractors, electricians, and directly with clients. We have completed hundreds of projects both commercial and residential, from small gardens to large estates, patios to shopping malls.
You can depend on us for informed advice on lighting design, product selection, and best practices for installation. Please feel free to use our site as an online catalogue or to buy direct online, but if you are daunted by the task, or choice of fittings, feel free to contact us for advice.
Our Products Include:
- Bollard Lights
- Deck Lights
- Down Lights
- Drive Over Lights
- Flood Lights
- Path Lights
- Pole Lights
- Recessed Ground Lights
Rowan Almond Limited is a small family-run business. With over 25 years experience in the lighting industry, Rowan Almond has now become a trusted name. Working initially as a Sales Agent providing lighting solutions in the Exhibition and Retail sectors, Rowan formed his own company in 2002.
When given the opportunity to supply exterior lighting to an old friend who was a Landscape Architect another door opened, and the company soon started to specialise in top end landscape lighting products. Experience soon revealed that only quality products can survive the British weather, and the company became a distributor for LuxR and Hunza. These are some of the best outdoor lights in the world, developed in New Zealand from the finest materials.
Rowan has gained extensive experience working with architects, landscape architects, contractors, electricians, and directly with clients. We have completed hundreds of projects both commercial and residential, from small gardens to large estates, patios to shopping malls.
You can depend on us for informed advice on lighting design, product selection, and best practices for installation. Please feel free to use our site as an online catalogue or to buy direct online, but if you are daunted by the task, or choice of fittings, feel free to contact us for advice.
Images
