Company details for:
Safety Unlimited
Unit 2,
40 Comet Way,
Southend-on-Sea,
Essex,
SS2 6XW,
United Kingdom
Quick Links:
Products
Chemical Absorbents
- Ideal for hazardous liquid spills
- Can be used on a wide range of chemicals including Hydrofluoric Acid
- Available in pads, rolls, socs, pillows and booms
Oil Only Absorbents
- Hydrophobic, will not absorb water
- Float on water, indefinitely
- Ideal when dealing with Oil or Petroleum based spills, outside, or on water
- Available in pads, rolls, socs, pillows and booms
Drum Storage Units
- Designed for the storage of 205 litre drums
- All units are welded for added strength
- Constructed from 2mm profiled mild steel sheet over 100mm x 50mm x 3mm RHS
- Fully welded leakproof sump over entire base area to a depth of 190mm
- Removable galvanised grid shelf and flooring
- High and low level vents
- Two standard models are available
- C. Padlockable sliding doors
- D. Padlockable roller shutter doors
- E-DSU64C & E-DSU64D have doors on both sides of the unit
- E-DSU8C has double hinged lockable doors
Bunded Fuel Dispensers
- Simple to install, it should be situated on a firm base without the need for ladders
- Easily accessible for clean, safe filling and dispensing of fuel
- Manufactured from robust ribbed top quality Polythylene, will never rot or rust
- Fitted with the pro-active fuel monitoring system Watchman Plus, which is also compatible with the acclaimed Fullstop alarm system
- Independantly tested and licensed by OFTEC to confirm compliance with the European standard OFS T100 (OFCERT License No. 0642069817)
- Guaranteed for 10 years
Drain Protection - Kits
- Thin chloroprene mat, chemical & oil resistant, moulds into road surface
- Tub of leak blocking granules can provide either a quick sticky plug when activated with water or can be poured around the mat to block any holes
Fork Lift Attachments
- Ideal for high volumes
- Handles drums of varying diameters
- Handles drums packed tightly together
- Handles damaged and open topped drums
- Ideal for transporting over rough ground
- Hardened steel jaws grip the drum by the rim
- The heavier the drum, the tighter the grip
- Maximum fork spread 560mm
- Maximum fork size 140 x 50mm
Fall Protection - Fall Arrest
- CABLE SPEC: 5mm Galvanized Steel Wire Rope
- CONNECTOR: Double action. High tensile steel alloy
- WEIGHT: 6.5 kg
- FEATURES: Fall indicating connector
- MAX FORCE ARREST: < 6 kN
- APPROX ARREST DIST: 0.5 Metres
- Conforms to EN 360
Gas Cylinder Storage
E-GCS30: For the safe storage of Gas Cylinders
- Constructed fron 2mm Profiled Mild Steel over 50 x 50 x 3mm RHS
- Galvanised sloping roof
- Solid Tread Plate floor
- Padlockable mesh doors
- Ramp for easy access
- Finished in corrosion resistant paint RAL 3020 Red
- If this product does not meet your requirements, ask about our Custom Build Service
Personal Protection Equipment - Boilersuits
- PW-S802: Two side and access pockets, One chest pocket with flap, Concealed stud front, Elasticated back waist, Fabric: Kingsmill 245g, Available in Navy
- PW-S841: Standard Apron available in Black, Navy, White and Royal Blue, One size fits all, 65% polyester 35% cotton
- PW-C031: Flame Retardant, Two zip front pockets, Two side and hip pockets. Zip Front, Available in Royal Blue
- PW-C032: Flame retardent to EN531, Two zip front pockets, Two side and hip pockets, Available in Orange
Poly Drum Funnels
- Empty containers easily without mess
Portable Secondary Containment
E-5920OP / E-5966OP / E-5900OP / E-5950OP
- Strong lightweight spill containment pool
- High density Polyethylene tapes with a low density coated construction
- Resistant to a wide range of chemicals, Acids, Petrol, Diesel, and solvents
- Sets up in a minute to ensure fast, safe, hazardous spill containment
- Allows at-a-glance fill level verification
- Rolls up for easy storage
- Fits neatly in our Poly Edge unit E-1601
Pumps- Lever Action - Metal
- Lever Action
- Die-cast Alloy & Steel construction
- Brass piston ring
- 0.3 litres per stroke - 14 litres per min approx.
- Threaded 2 inch & 1.5inch BSP barrel adaptor
- Telescopic 457mm to 890mm riser tube
- Suitable for all petroleum products, non-corrosive, solvents, thinners, anti-freeze, etc.
- Weight 2.5kg
Safety Cans - Eagle Dispensing Can
- Manufactured from 24 gauge hot dipped Galvanised Steel
- Spring loaded filler cap with Neoprene gasket
- Pressure release at 5 psi
- Flame Arrester, at both filling and dispensing points, to prevent ingress of spark or flame igniting the contents
- Flexible metal dispensing spout
- Comfort grip trigger release
- Deep drawn construction with no top or side seam
- Double interlock no-weld bottom seam
- Meet OSHA & NFPA Code 30 requirements, FM,UL & ULC approved
- Powder coat finish
- SUPERB QUALITY AT A GREAT PRICE!
- Please check with our Sales Office to ensure that the Safety Can you require is suitable for the type of liquid you are using
Safety Storage Cabinets - Acid & Chemical Storage
- Spot welded seams with gas welded Corner Joints
- Lockable via a two point locking system
- Doors have a reinforced vertical panel to prevent distortion due to heat
- Fully adjustable shelves to 45mm pitch
- Spillages to drain into the leakproof sump below
- Removable leakproof sump
- Sump cover to allow containers to be stored on the sump whilst retaining the full containment capacity
- Finished in White Full Epoxy Powder Coat for Acid/Corrosive resistance
- All cabinets comply with HSG51, COSHH and current Health, Safety and Environmental Regulations
Secondary Containment - Bunded Flooring
- Designed to hold 205 litre drums
- Manufactured from 2mm Mild Steel
- Removable Galvanised Steel Flooring Panels
- Ideal as a catchment facility for incidental spills
- Build your own work station floor with this modular system
Maintenance Spill Kits - GSK2
- Ideal for use in Factories & Workshops
- For use on non-aggressive water based liquids
- Use of spillages of:
- Oils
- Fuels
- Solvents
- Cutting Fluids
- Mild Acids
- Mild Alkalis
- Milk
- Water
- Water Based Liquids
- If you cannot find a spill kit that fulfils your requirements, ask about our bespoke spill kit service.
Spill Management Signs
Spill Mops
- Perfect for cleaning up water and water-based liquids completely eliminating smelly mops and buckets
- Mop attaches easily to the 3 stage handle
- Specially formulated absorbent core soaks up liquid into a non-drip gel
- Ideal for soaking up spills containing metal shavings or broken glass
- Spill pads can be attached to remove the final residue to leave a polished floor
- Available in a kit bag or wall station
STARDUST Super Absorbent
- Leaves floors clean and dry
- Eliminates slip and fall risk
- Saves money by reducing cost of labour, downtime and disposal
- Environmentally friendly
- Outperforms all competitive products
- Absorbs liquids of any viscosity
- Paint, Petrol, Diesel, Oil, Grease, Solvents, Body Fluids,
- Absorbs 20 times that of clay granules
- Stardust is non toxic
- STARDUST WILL ABSORB
- All Petroleum products
- Hydraulic/brake/transmission fluids
- Motor oil
- Axle grease
- Refining and production wastes or expended by-products
- All liquid and semi-liquid food substances
- Honey, syrup Jams, jellies Peanut butter
- Glycol (anti-freeze)
- All bodily fluids
- Human and animal wastes
- Blood
- Herbicides Bases
- alkalines, Solvents, Acids (except Hydrofluoric Acid)
- Seeing is believing
- Ask for a FREE demo DVD
- Stardust must NOT be used on Hydrofluoric Acid
- Ask about our quantity discounts!
STARPOWER
- Water Based
- Star power can be used for:
- Old Oil Stains,
- Paint (oil or water based),
- Hard water deposits,
- Autos and Trucks,
- Kitchen equipment and surfaces,
- Machinery,
- Carbon Black,
- Food processing equipment,
- Oil refinery eqipment,
- Oil storage tanks,
- Graffitti,
- And many more...
- ALL PRICES SHOWN ARE PER CASE OF 4 x 3.7ltr BOTTLES
Economy Galvanised Bins - E-SB105/106
- Constructed from 22swg Galvanised sheet steel
- Provision for locking is made via a hasp & staple
- Flanged lid with retaining device to prevent the lid falling back
- ESB105 is not supplied with leakproof sump and is not advised for liquid storage
- ESB106 is supplied with a 140mm liquid tight sump
Drum Vents - E-522
Base Emptying Waste Stillage
- One man operation
- Operator stays on forklift throughout operation
- Optional blue, red, green colours
- Braked Castors for ease of movement, off-truck, or final positioning, 100 mm diameter Cast Iron or Nylon
- Lifting Lugs for crane or hoist
- Lids to protect the waste from the elements
Winchester Bottle Carriers
- Constructed from 20swg Zintec coated steel
- Specially designed sump partitioned to take appropriate amount of bottles
- Provision for locking via a hasp & staple. Fitted with carrying handles
- Finished in full epoxy white powder coating and labelled to comply with all current regulations
- WBC80T & WBC100T are fitted with castors for total mobility
- Bespoke service available
Dual Purpose Storage Units
- Designed to prevent environmental pollution and hazardous situations by containing accidental spills
- Designed for the storage on 205 litre drums & 1000 litre IBCs
- All units are welded for added strength
- Constructed from 2mm profiled mild Steel Sheet over 100 x 50 x 3mm RHS
- Fully welded leakproof sump over entire base area to a depth of 220mm
- High and low level vents
- Padlockable sliding doors (E-DPSU64/16C & E-DPSU96/24C has sliding doors on both long sides).
- Removable Galvanised grid shelving available as an additional cost option
- Upper and lower levels have support bearers
- These units comply with the Control of Pollution (Oil Storage) (England) - Regulations 2001, The Water Environment (Oil Storage) (Scotland) Regulations 2001, E.A. Guidance Note PPG26, The Health & Safety Executives Guidelines for the Storage Of Flammable Liquids HSG51 and current Health, Safety & Environmental regulations.
- Storage units can be custom made to suit your storage requirements.
- Optional extras include:- Insulation, Heating, Temperature Control, Lighting & Fire Detection.
- Contact our Sales Office for a No Obligation site survey.
About us
Utilising over 35 years of experience in the manufacture and supply of storage, handling and containment products we can tailor products to suit individual requirements.
Our product portfolio includes safety cabinets, spill pallets, drum storage units, IBC storage units, drums and relocatable safety stores for flammable liquids and chemicals. In addition we also offer safety cans, absorbent products and a superb range of personal protective clothing.
New to our product range are the dual purpose and multi purpose storage units, manufactured to highest quality standards ensuring the safe storage of flammable liquids and hazardous chemicals. Designed to store 205 litre drums and 1000 litre IBCs they are fully bunded with high and low flame arrested ventilation. All units have a fully galvanised roof and rain gutter to prevent corrosion and they are internally and externally finished in a chemical resistant two pack acrylic paint system.
As a leading specialist we can offer a bespoke manufacturing service, so if one of our standard units does not meet your requirements, we will manufacture a storage unit to your specification.
Spillage incidents can still occur in the workplace even when solutions are in place to prevent accidents. Here at Safety Unlimited we have a comprehensive range of spill management solutions to minimise these risks including the provision of spill response and prevention training, spill response kits and environmental risk assessments.
Images
Trade Associations
