Company details for:
Shaw Hydraulics Ltd
Unit 8,
St George''s Industrial Estate,
Wilton Road,
Camberley,
Surrey,
GU15 2QW,
United Kingdom
Quick Links:
Products
RC-Series Duo Single Acting Cylinders
- The exclusive Golden Ring design absorbs eccentric loading without galling cylinder parts
- Collar threads, plunger threads and base mounting holes enable easy fixturing (on most models)
- Cylinder design for use in all positions
- High strength alloy steel for durability and heavy duty return springs
- Nickel plating available on most hydraulic cylinder models (contact Enerpac for details)
- Baked enamel finish for increased corrosion resistance
- CR-400 coupler and dust cap included on all models
- Plunger wiper reduces contamination, extending cylinder life.
LPL-Series Pancake Locknut Cylinders
- Integrated tilt saddle allows for up to 5 degrees of misalignment
- Extreme low height for use in confined areas
- Side-load resistance 5-10% of maximum capacity
- Overflow port as stroke limiter to prevent plunger blow-out
- Single-acting, gravity return.
Enerpac SC Series & Cylinder Pump Sets
- Optimum match of individual components
- All sets are ready-for-use
- Cylinder pump sets include 1,8 m safety hose and gauge with gauge adaptor
- All hand pumps are two-speed.
GBJ Series, Industrial Bottle Jacks
- Fully serviceable
- High-strength beam and pump linkage for long life
- Pumping handle included on all models
- Safety relief valve to prevent overload
- Automatic by-pass port to prevent over-extension
- Wiper seal for extended life
- Thick base material with large area for increased strength and stability during lifting
P-Series, Hydraulic Lightweight Hand Pumps
- Durable glass-filled nylon reservoir and nylon encapsulated aluminium pump base for maximum corrosion resistance
- Two-speed operation reduces handle strokes by as much as 78% over single speed pumps
- Lower handle effort to minimize operator fatigue
- Integral 4-way valve on P-842 for operation of double-acting cylinders
- Handle lock and lightweight construction for easy carrying
- Large oil capacities to power a wide range of cylinders or tools
- Non-conductive fiberglass handle for operator safety
- Internal pressure relief valve for overload protection.
JH, JHA-Series, Aluminium & Steel Jacks
- All-directional operation on 7, 15 and 35 ton JHA-series
- Internal relief valve to prevent overloading
- Machined flat front and bottom surfaces permit flush alignment in tight corners
- Chrome plated plungers
- Pumping handle included
- Automatic by-pass port to prevent over-extension (JH-series).
PR-Series, POW''R-RISER Lifting Jack
- 102 mm ground clearance for transport over rail and rough terrain
- Three position handle provides easy tilt back and transport
- Complies with ASME/ANSI B30.1 specifications
- Easy to change external filter minimizes down time
- Rugged, fully enclosed 610 mm wide frame with no exposed fittings or hoses
- SUP-R-STACK™ Extension System allows lifting at all heights without blocking
XC-Series, Cordless Hydraulic Pump
- The cordless hydraulic pump features a lightweight design with integrated handle and carrying strap for portability
- Bladder reservoir prevents contamination and allows pump usage in any position
- Powerful 0,37 kW motor and 28 volt Lithium-Ion battery deliver exceptional speed and run time
- High-strength fiberglass reinforced composite shroud for superior durability in demanding job site environments
- Cordless hydraulic pump technology eliminates tripping hazards found in other powered pumps
V-Series, Hydraulic Pressure & Flow Control Valves
- All valves feature NPTF porting to insure against leakage at rated pressure
- All valves are painted, coated, or plated for corrosion resistance
- Needle valves: to control cylinder speed
V-82: can also be used as shut-off valve for temporary load holding
V-182: as V-82, also suitable for gauge snubbing
V-8F: as V-82, but with very fine metering for precise flow control. Not remommended as shut-off valve
- V-91: Snubber valve, prevent snapping of gauge pointer when load or pressure is suddenly released. Also suitable as shut-off valve to protect gauge during high cycle applications
- V-10: auto damper valve; protect gauge during high cycle applications
- Check valves: for load holding with cylinders, to control oil flow direction
V-17: to resist shock and operate with low pressure drop
V-42: pilot-operated, pilot pressure ratio 14%
V-66: manually operated
V-66F: same as V-66, but with fine metering for precise oil flow control
- Pressure relief valves: limits pressure in circuit developed by pump
V-152: ±3% repeatability
V-161: sequence valve; to control oil flow to a secondary circuit.
R H700-Series, High Pressure Hydraulic Hoses
- For demanding applications, featuring a 4:1 safety factor
- Maximum working pressure of 700 bar
- Outside jacket is polyurethane, to provide maximum abrasion resistance
- Exhibits low volumetric expansion under pressure to enhance overall system efficiency
- Crimped-on rubber strain relief for improved life and durability on all hydraulic hose models.
XLP, VLP-Series, Hydraulic Bench & Shop Presses
XLP-Series hydraulic press
- Multi-functional presses in kit form (50 and 75 ton presses)
- Easy grip forklift access on 50 and 75 ton presses
- Height adjustment of upper or lower bed with winch (50 & 75 ton)
- Width adjustment allows cylinder to move from side-to-side
- Pump options include XA-Series air-operated foot pump
− pressure gauge integrated in pump for optimal control
− suitable for delicate pressing jobs from variable oil flow.
VLP-Series hydraulic press
- Unique “Hydrajust” bed positioning device on 100 and 200 ton VLP-presses allows adjustment of the lower bed.
TM, LH-Series, Press Tension Meter & Load Cells
- Accuracy, ± 2% of full scale
- Zinc and bronze plated to resist corrosion
- Dual-range readout in kilograms and pounds
- Maximum indicating pointer reading for pre-selected forces or to maintain force readings
- Cushioned metal case provides safe storage and transport.
Load Cells LH-series
- Accuracy of ± 2% of full scale
- Swivel loading pad reduces eccentric loading for improved accuracy
- Maximum indicating pointer reading pre-selected forces or to maintain maximum force readings
- Dual-range readout in kilograms and pounds
BHP-Series, Hydraulic Master Puller Sets
- High quality, forged steel components provide superior reliability and service
- Sets include speed crank and adjusting screw for fast contact to work before hydraulics are applied
- All Master Puller Sets include a Grip Puller, a Cross Bearing Puller, a Bearing Cup Puller and a Bearing Puller Attachment, which can be ordered separately, see items nr. 10, 20 , 30 and 40.
WARNING Do not exceed 50% of the rated puller capacity when using a double crosshead (2 grip arms) or when using puller legs in combination with bearing puller attachment.
EP-Series, Posi Lock® Mechanical Pullers
- Roll threaded shafts for less effort when applying high torque
- Slim tapered jaws for improved gripping in tight spots
- Available in 2 and 3 jaw design and inside and outside pulling configuration
- More efficient pulling, as one man can do the job where manual pullers often require two operators.
MS-Series, Hydraulic Maintenance Sets
- All sets include Enerpac pump, hose, cylinder and gauge
- Lock-on or threaded connectors
- Complete maintenance set for almost every maintenance application.
SP-Series, 50 Ton Hydraulic Punch
- Double-acting cylinder design for fast cycle times
- Punch and die changeover tools included
- Lifting bracket included
- Adjustable power stripper prevents movement of the metal during stripping
- CR-400 female couplers included
W-Series, Low Profile Hexagon Hydraulic Torque Wrenches
- Rigid steel design − durabilty, reliabilty and safety
- No tools needed for changing hexagon heads
- Versatility: one hydraulic drive unit per torque capacity can be used to drive any hexagon head within that range
- Innovative, pinless wrench construction with quick release drive and automatic crank engagement
- Fast operation due to the large nut rotation per wrench cycle (30 degree) and rapid return stroke, double-acting
- Constant torque output provides high accuracy (± 3%) across the full stroke
- 360 degree swivel manifold with screw lock couplers
- Optional interchangeable metric and imperial hexagon heads and reducer inserts
NC-Series, Single-Acting Hydraulic Nut Splitters
- Unique angled head design
- Single-acting, spring return cylinder
- Heavy duty chisels can be reground
- Nut splitters include spare chisel, spare set screw and wrench used to secure the chisel. A CR-400 coupler is standard.
- Hydraulic nut splitter applications include service trucks, piping industry, tank cleaning, petrochemical, steel construction, mining, etc.
NS-Series, Hydraulic Nut Splitters
- Single-acting (spring return) or double-acting cylinder
- Tri-blade technology provides three cutting surfaces on a single blade
- Interchangeable heads provide maximum nut range flexibility
- Preset scale allows controlled blade extension, which avoids damage to bolt threads
- Grip tape and handle included for more secure manoeuvrability
- Nickel-plated cylinder body for excellent corrosion protection and improved durability in harsh environments
- Internal Pressure Relief Valve for overload protection
- CR-400 coupler and dustcap included on all models.
BRC-BRP Series Pull Cylinders
- Plunger blow-out protection to prevent rod over-extension
- Hard chrome-plated plunger for long life
- Replaceable links on BRP pull cylinder models
- Baked enamel finish for increased corrosion resistance
- CR-400 coupler and dust cap included on all pull cylinder models
- Plunger wiper reduces contamination, extending cylinder life
- Single-acting, spring return.
RAC-Series, Aluminium Cylinders
- Composite bearings prevent metal to metal contact, increasing cylinder life and resistance to side-loads of up to 10%
- Hard-Coat finish on all surfaces resists damage and extends cylinder life
- Handles standard on all aluminum cylinder models
- Steel base plate and saddle for protection against loadinduced damage
- Integral stopring prevents plunger over-travel and is capable of withstanding the full cylinder capacity
- High strength return spring for rapid cylinder retraction
- CR-400 coupler and dustcap included on all models
- All aluminum cylinders meet ASME B-30.1 and ISO 10100 standards
Hydraulic Gantries
Strand Jack
Skidding Systems
Self-Propelled Modular Transporter
About us
We are trusted and recognised by Enerpac Hydraulic Limited who a well-known industrial tool company leading the market in hydraulic products. Shaw Hydraulics are proud to have been chosen to be their UK distributors. This privilege means we sell various hydraulic industrial tools, hydraulic pumps, hydraulic cylinders and more of their brand as well as providing these products for hiring purposes.
Distributing from Enerpac we also sell system components such as gauges, manifolds and hoses as well as hydraulic valves and hydraulic pumps in manual, electric, air hydraulic and gasoline. Hydraulic presses, too, in a variety of series along with mechanical or hydraulic pullers.
We’re happy to offer such an extensive range of Enerpac tools, from attachments to hydraulic cutters, from lifting wedges to hydraulic punches from maintenance kits to connectors and adaptors and many other mechanical and hydraulic specialty tools. And we haven’t forgotten about bolting tools for controlled tightening, joint separation and joint assembly.
That’s not all, though. Another giant in hydraulics, Simplex, has also chosen Shaw Hydraulics as their distributors of mechanical jacks such as roof support jacks, screw jacks, super jacks, ratchet jacks and reel jacks. As if that’s not comprehensive enough there’s also rack jacks, spreader jacks, trench braces, push and pull jacks, loadbinder jacks and planer jacks. And that’s a lot of jacks!
Shaw Hydraulics can also fulfill your load links, load measuring shackles, stainless steel cylinders, line monitoring and sub-sea equipment needs.
Our other services span from a very caring and highly experienced sales team who can cater for your sales related needs, repair services for Enerpac and Simplex equipment and design and manufacturing of non-standard specials.
Images
