Company details for:

Socomec UK Ltd

Submit press release

(0)

Units 7A-9A Lakeside Business Park,
Broadway Lane,
South Cerney,
Cirencester,
Gloucestershire,
GL7 5XL,
United Kingdom

Quick Links:

Products

SIRCO M

SIRCO M are manually operatedmodulable and modular multipolar load break switches.
They make and break under load conditions and provide safety isolation for any low voltage circuit, particularly for machine control circuits.
Through the use of accessories, SIRCO M can be transformed into multipolar load break or 3/4 pole changeover switches provide on load changeover switching between two sources or two low voltage power circuits, as well as their safety isolation.

SIRCO M in Polycarbonate Enclosure

Enclosed load break switches ensure the on-load breaking and making of circuits and safely isolate all low-voltage electrical circuits by providing protection against contact with live parts and environmental elements, such as dust, water and other hazards.
They enable the shutdown and isolation of the power supply as close to the equipment as possible.

SIRCO M in Stainless Steel Enclosure

Enclosed load break switches ensure the on-load breaking and making of circuits and safely isolate all low-voltage electrical circuits by providing protection against contact with live parts and environmental elements, such as dust, water and other hazards.
They enable the shutdown and lock out of the power supply as close to the equipment as possible.

SIRCO MV

SIRCO MV are manually operated modulable and modular multipolar load break switches.
They make and break under load conditions and provide safety isolation for any low voltage circuit, particularly for machine control circuits.

SIRCO AC

SIRCO AC units are manual or motorised multi-pole load break switches.
They make and break under load conditions and provide safety isolation.
SIRCO AC devices are designed for extreme applications up to 690 VAC - AC 23.

ATyS t M

ATyS t M are modular automatic transfer switches with positive break indication. They are 4 pole (three-phase) devices.
They have all the functions of the ATyS d M together with an integrated controller, giving them automatic features dedicated to mains/mains applications. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

ATyS p M

ATyS p M are single-phase or three-phase modular automatic transfer switches with positive break indication. They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.
ATYS p M provide open transition switching (I-0-II), on-load transfer between two sources for any low voltage power circuit, as well as safety isolation with double breaking per pole.

ATyS p M in Steel Enclosure

Our transfer enclosures are equipped with ATyS motorised and automatic changeover switches to ensure power availability in critical applications. Motorised transfer enclosures are controlled remotely through volt-free contacts (e.g. from an external automatic controller or pushbuttons). Automatic transfer enclosures monitor the condition of the low voltage power sources and automatically changeover to the available supply to ensure continuity of supply to the load.

ATyS p

ATyS p are 3 or 4 pole automatic transfer switches with positive break indication. They incorporate all the functions offered by the ATyS t and g, as well as functions designed for power management and functions communication.

FUSOMAT BS88

FUSOMAT fuse-combination switches are manually operated 3 or 4-pole load break switches with visible breaking and a remote tripping function.

FUSERBLOC NFC & DIN Direct Operation

FUSERBLOC are manually operated multipolar fuse combination switches. They make and break on load and provide safety isolation and protection against overcurrent for any low voltage electrical circuit.

LMDC FUSERBLOC

FUSERBLOCs LMDC are designed to perform the maintenance of DC/AC speed drives or PV inverters without stopping the entire installation. This multifunctional device for performing maintenance work on a branch of the electrical system while leaving the rest of the equipment energised.

FUSERBLOC UL

FUSERBLOC UL are heavy duty switches that break and make power circuits on and off load.
The switches employ double break contacts per pole that ensure complete isolation of the fuse when the switch is in the “OFF” position. These switches are extremely durable and are tested and approved for use in the most demanding applications.

FUSERBLOC in Metallic Enclosure

Enclosed fuse combination load break switches ensure on-load breaking and making of circuits, protect against overcurrents and safely isolate all low-voltage electrical circuits by providing protection against contact with live parts and environmental elements, such as dust, water and other hazards.
They enable the shutdown and lock out of the power supply as close to the equipment as possible.

RESYS M40

The RESYS M40 differential relay is combined with a triggered cut-off device (automatic power cut-off), to meet the following functions:
- Protect against indirect contact
- Limit earth leakage currents.
It also ensures the preventive monitoring of electrical installations with its pre-alarm function (configurable) or when used in signalling relays.

RESYS M40R

The RESYS M40R differential relay is combined with a cut-off device equipped with a motorised control (automatic cut-off and restoration of power), ensuring the functions of:
- Protect against indirect contact
- Limiting earth leakage currents.
- Re-engaging the cut-off device after detecting earth leakages and power outages.
The relay re-engages the system up to six consecutive times after different time intervals. If the fault is still present after the sequence of six re-engage attempts, the relay enters an alarm state and manual intervention is required.

RESYS P40

The RESYS P40 differential relay is combined with a triggered cut-off device (automatic power cut-off), to meet the following functions:
- Protect against indirect contact
- Limit earth leakage currents.
It also ensures the preventive monitoring of electrical installations with its pre-alarm function (configurable) or when used in signalling relays.

SURGYS G140−F

SURGYS G140-F surge arresters are designed to protect your low voltage distribution systems and electrical equipment. It acts against industrial operation surges and surges owing to lightning.
This type of surge arrester is particularly recommended where there is a risk of direct impact of lightning strikes.
NEW: impulse current (Iimp) of 25 kA per pole and special products for TT arrangements.

SURGYS G100−F

The SURGYS G100-F surge arrester is designed to protect your low voltage distribution installations and your electrical equipment. It acts against industrial operation surges and surges due to lightning. This type of surge arrester is particularly recommended where there is a risk of direct impact of lightning strikes.

SURGYS G40−FE

SURGYS G40-FE surge arresters are designed to protect your low voltage distribution systems and electrical equipment. It acts against industrial operation surges and surges owing to lightning.

SURGYS E10

SURGYS E10 surge arresters are designed to protect installations connected to single-phase, three phase or DC networks against industrial operation surges. They act against transient surges due to lightning.

SURGYS RS−3

SURGYS RS-3 surge arresters are designed for transient surge protection of equipment connected to telecommunications and data transmission networks.
These surge arresters must be installed on a symmetrical DIN rail and are available for most transmission lines: line voltage 12 V, throughput up to 10 Mbit/s. These products consist of 1 or 2 pairs with a detachable module for easy maintenance.

Insulated Flexible Copper Bars

Flexible copper bars are mainly used for providing the power connections between busbars and the disconnection devices.

SB 205 Busbar Support

With insulating bar supports you can mount and attach the busbars inside the electrical panel and cope with the forces experienced by the busbars during a short circuit.

FP ESS

FP ESS fuses are specifically for DC networks with high voltage and short circuit levels. They perfectly meet the requirements of energy storage applications and ensure optimal protection of battery racks and battery connection panel (BCP) against short circuits and overloads.

About us

Socomec is a family-owned Industrial Group specialising in uninterruptible power supplies, control and safety of low voltage electrical energy systems for the industrial and services sector.

With Socomec you get the expertise of a fully integrated design, manufacturing and service supplier that understands your application and works with you to provide the right products, services or systems to meet your needs.

We have a team of highly trained maintenance engineers and technicians available to assist with a range of services including installing and commissioning of equipment, preventative and remedial maintenance, 24-hour availability and a remote LINK-UPS service.

Socomec UK Ltd specialises in four main business applications:

Power Control & Safety - managing power and protecting individuals and property.

Low voltage automatic transfer applications
Measurement, analysis and monitoring of network data at every level of the infrastructure
Current, energy and power monitoring in power distribution units or remote power panels

Critical Power - ensuring the availability of high quality power for critical applications.

UPS that provide high quality power, reduce distortion and interruptions to the mains supply due to the power storage back up
Changeover of high availability sources to transfer supply to an operational back up source
Continuous monitoring of installation facilities to prevent failures and reduce operating losses

Energy Efficiency - improving building and facility energy efficiency.

Measure power consumption, identify sources of excess consumption and raise occupant awareness
Limit reactive energy and prevent associated tariff penalties
Use the best tariffs, check supplier invoicing and accurately distribute energy bills amongst consumer entities

Solar - guaranteeing safety and durability of photovoltaic facilities.

Safety through specially designed switch disconnections that cut the DC current generated by solar panels regardless of facility configuration and operating conditions
Solutions that prevent the degradation of insulation and electric arc failure in the DC current
Control of high efficiency energy conversion, via PV invertors that transform all energy generated into power for consumption locally

To find out more please visit www.socomec.co.uk or email info.uk@socomec.com