Teledyne Gas & Flame Detection

The CPS car park air monitor accurately and reliably protects the public and employees from airborne toxic gases in parking facilities and tunnels. The system was designed to comply with the high air quality safety standards enforced in such European countries as Germany, the Netherlands and Belgium.

Teledyne Gas and Flame Detection has designed the SURVEYOR 4B as a monitoring apparatus specifically designed to ensure the safety of boiler plants, battery charging rooms or small units where your operations are at risk due to the possibility of flammable gas leaks.
Developed for quick, safe detection, the SURVEYOR 4B control module combines highly reliable monitoring, simple implementation and low costs.

The Model X40 controller is completely field programmable using a small handheld magnet and offers advanced technology with intuitive, embedded intelligence. The control system displays real time readings and field device status on a backlit LCD screen. During normal operation the screen displays the alarm status and current reading (i.e., channel number, gas type, and gas concentration) for up to eight field devices simultaneously. The display is sequential and during normal operation it auto cycles through each of the active channel screens.

The MultiSafe-MX system is intended for the protection of high hazard, high risk plant and facilities.
The MultiSafe-MX is certified, by European laboratories, to comply with the applicable regulations.
The panel is composed of dedicated cards, installed in 19” racks which have their own “intelligence”, programmed for active/passive fire protection, gas detection, intruder alarm and logic functions. Moreover, the MultiSafe-MX can interact with supervisory and SCADA systems via Ethernet, TCP/IP or Modbus.
The MultiSafe-MX interfaces with devices using either conventional and/or addressable module inputs and outputs. These modules are used to tailor the system to customer requirements.

Alarm Bar C1D2 is designed for use in industrial environments where a very bright visual and high decibel alarm signal is required. It is available in a dual strobe or quad strobe configuration. The alarm station consists of a sequence of strobes and a siren. The high intensity strobe light provides 60-80 flashes per minute rated 1.9 joules per flash. Strobe color options include amber, blue, clear, green, purple and red. The siren is capable of producing 28 user selectable tones and produces an output of up to 125 db @ 1 meter.

The audible alarm features 3 field selectable tones: Wail, Yelp and Horn. Alarm assemblies are specifically designed for hazardous locations or corrosive environments where a very bright visual and high decibel alarm signal is required. The high-intensity strobe lights provide 80 flashes per minute. The siren produces a noise level of 98dbA @ 10 feet in a wide angle sound dispersion pattern. The lights are UL listed and CSA Certified for Class I, Division 2, Groups A, B, C and D; Class II, Division I, Groups E, F, and G; and Class III. The siren is UL listed for Class I, Groups B, C and D.

The AV2-N4X audible alarm is capable of producing coded blasts or sustained tones. The alarm assemblies are specifically designed for non-hazardous general purpose locations or environments where a very bright visual and high decibel alarm signal is required. The high-intensity strobe light provides 60-80 flashes per minute. The siren produces a noise level of 99dbA @ 10 feet. The light is UL listed and CSA Certified and meets Type 4X watertight, dust-tight requirements. The siren is UL listed and CSA Certified.

When hazardous levels of toxic gases or oxygen threaten the safety of an unclassified area, the CTX 300 oxygen detector can satisfy the most demanding safety requirements.
The CTX 300 detector is designed to detect oxygen, toxic and refrigerant gases, and also uses a new sensor for CO2 detection over three different ranges: 0-5000 ppm, 0-5% vol. and 0-100% vol.
The CTX 300 transmits data in record time. With a wide range of sensor options, it has the flexibility to protect many potentially hazardous environments.
Maintaining the unit is easy with pre-calibrated sensors and an optional LCD display.

The OLCT 10N is a digital combustible gas detector designed for to detect combustible, toxic gases or oxygen.
Intended for use in combination with the MX 43 controller, the OLCT 10N provides a fast and accurate response. Up to 32 detectors can be connected on the same digital line or distributed on 8 lines.
All transmitter information is received by the controller in less than 1 second.
Non-intrusive operator interface requires only a simple magnetic wand and allows one man calibration without opening the enclosure.

The iTrans2 infrared gas detector employs an intelligent electronics platform to provide one or two points of detection from a single head for maximum flexibility, superior performance and lower installation costs. With the optional HART Communication Protocol, the iTrans2 offers remote diagnostics, set-up or calibration by superimposing a high-frequency current across the industry standard 4-20mA analog line.

The OLC(T) 20 Series of gas detectors are designed for indoor or outdoor facility monitoring and other applications to accommodate your gas detection requirements at a reasonable price.

The MultiFlame DF-TV7−T is designed to respond to unwanted hydrocarbon fires, while maintaining a high degree of false alarm immunity. The device offers a wide range of output options, as standard and is suitable for use in SIL 3 applications. The unit may be interfaced directly with a wide range of fire panels, controllers and PLC’s etc.
The unit is fully configurable using a wireless hand-held terminal (TLU) or optionally via HART (R) giving true flexibility to the installer. Time delays, sensitivity and output configuration are all set up via the TLU; a hazardous area approved hand-held unit.
Wireless testing of the optical and output circuits are also possible using the TLU.

The SmartWireless Site Sentinel CX sensor station is an accessory to the SmartWireless Site Sentinel CXT and is easily and economically deployable in both permanent and temporary installations. The CX wirelessly transmits the data from up to 4 wired gas detectors back to the CXT and includes a battery that powers the radio, alarm devices, and the attached sensors. The Sentinel CX is compatible with Detcon’s Model RXT transceivers. Flexible and expandable, a Site Sentinel network can include up to 32 devices and consist of any combination of wireless and/or wired sensors, one or more Site Sentinel control panels, and alarm warning devices.

Model CX sensors are equipped with standard analog 4-20mA, and Modbus™ RTU RS-485 outputs and can be used with SmartWireless Site Sentinel CX/CXT controllers. The CX is a very low power device making it an ideal choice for a battery powered detector (optional) in applications where power is unavailable or not economically feasible.

The test station stores monitor event data and test data logs. It is designed to be used with 34 - 103L bottles of calibration gas available from Scott.
Regulatory Approvals:
FCC
CE
cETLus
EMC Compliance: CE Mark, C-Tick, FCC, IC
Safety Compliance: CD, cETLUS, IECEE CB Report

The ABC is fully configurable and can operate in three distinct modes of operation: Standalone, PC, and Ethernet.
Standalone
−No PC or network connection required
−Simple setup and configuration
−Results stored on ABC
−USB access for results extraction
−Settings app for easy printing or calibration certificatesPC
−PC/Laptop connected to ABC
−Setup and configuration using flexiCal Plus software
−Results stored in the PC/laptop
−Easy access to all results
−Powerful data management/calibration certificate generation
Ethernet
−Multiple ABC’s can be connected to a network
−Setup and configuration using IMS settings software
−All results stored in the IMS database
−Easy access to all results
−Powerful data management/calibration certificate generation

The First Responder detects flammable gas at PPM, LEL and % Vol levels with the addition of carbon monoxide for internal atmosphere monitoring.
An optional external range diffusion probe with high speed semiconductor sensor enables rapid response in detecting small fitting leaks.

Up to 5 gases can be simultaneously measured and displayed. The hydrocarbon range, which utilises the latest infrared technology, can be calibrated with Butane, Propane or Methane, depending on application.
The Shipsurveyor also comes complete with an impressive and practical suite of application software. Our bespoke software not only allows simple on-board calibration but crucially provides the ability to print calibration certificates. In addition, complete datalogging software comes as standard allowing logged gas readings, with vessel locations, to be uploaded to a PC.
With ATEX and MED approval, the Shipsurveyor is the complete shipping solution.