IPAF
13 September 2019
IPAF Courses @ OTS
IPAF MEWP OPERATORS TRAINING COURSE:The aim of the course:- To instruct an operator to prepare & safely operate various types of MEWP & obtain an IPAF MEWP licence AGENDA Objective –
At the end of the course the operator will be aware of the relevant Health & Safety Regulations, accident prevention & control regarding personnel protection & the need to refer to the machine Operating Manual.
He will also be able to drive the MEWP safely as required. Introduction - Facilities Pal Card overview & pre course theory test - Regulations & Guidancr- MEWP Categories - Structural parts - Pre Use Inspection/Handovers - Safe Operating Methods & Hazards-Theory Test -Practical Training -Practical Assessment - Licence Renewal - Course Evaluation Each candidate requires a safety helmet, boots and any necessary Protective Equipment for the practical section. Course duration – minimum of 7 hours - start time 07:45 am prompt. If training is carried out on site, a suitable room and area would be required for the theory and practical section. A home address including post code and date of birth is required of each delegate. The course can cover 1b, 3a, 3b, 1a, PAV, IAD, Harness and RRV categories. See website for details if unsure of required category or contact our office.
Operator Training Services Ltd, Hanover Mill, Church Road, Mersham, Ashford, TN25 6NU 01233 721300
Other Press Releases By This Company
- 01/04/2021 - What are the benefits of eLearning?
- 01/04/2021 - OTS Covid-19 Update
- 01/04/2021 - IPAF PAL Cards are changing
- 17/02/2021 - Minimising Falls from Height
- 17/02/2021 - The Construction Helpline
- 08/02/2021 - CSCS Card
- 08/02/2021 - OTS Newsletter
- 08/02/2021 - Replacement Cards and Certificates
- 22/01/2021 - IPAF E-Learning Training
- 22/01/2021 - E-Learning Course @ OTS
- 22/01/2021 - HSE Executive
- 22/01/2021 - OTS All Course's
- 20/01/2021 - OTS January Update
- 20/01/2021 - January 2021 Update on Courses
- 20/01/2021 - E-Learning Course @ OTS
- 25/11/2020 - Working at height
- 25/11/2020 - Bookings
- 03/11/2020 - OTS
- 28/10/2020 - IPAF Harness Training
- 20/10/2020 - PASMA Standard Towers Training
- 07/10/2020 - On site Training
- 07/10/2020 - Falls from Height
- 23/09/2020 - The QR Code
- 16/09/2020 - OTS Covid 19 Procedures
- 11/09/2020 - Health and Safety Regualtions
- 11/09/2020 - Your duties as an event organiser
- 09/09/2020 - Off Site Training
- 27/08/2020 - PASMA Training and E-Learning
- 27/08/2020 - IPAF Training and E-Learning
- 27/08/2020 - Ladder Training with Operator Training Services
- 27/08/2020 - PASMA E-Learning Training Courses
- 03/08/2020 - PASMA Working at Height Training Course
- 03/08/2020 - Subsribe to OTS Newsletter
- 03/08/2020 - Covid 19 Leaflet
- 03/08/2020 - OTS Courses
- 27/07/2020 - MEWPS FOR MANAGERS TRAINING COURSE
- 22/07/2020 - OTS Newsletter
- 08/07/2020 - Health and Safety Stats
- 08/07/2020 - OTS are now taking bookings for 2020
- 03/07/2020 - Open for Business
- 05/06/2020 - National Construction helpline
- 11/05/2020 - IPAF, PASMA and Ladder Association
- 24/04/2020 - E-Learning Course @ OTS
- 24/04/2020 - E-Learning Course @ OTS
- 30/03/2020 - Covid 19
- 27/03/2020 - E-Learning
- 06/03/2020 - PASMA Tower Week 2020
- 28/02/2020 - Get Back to Bascis to stay safe
- 28/02/2020 - Fall Protection in MEWPS
- 13/02/2020 - PASMA for Managers @ Mersham on 16.03.2020
- 13/02/2020 - PASMA Towers on Stairs @ Mersham on 02.03.2020
- 11/02/2020 - Working at Height Presentation
- 27/01/2020 - Training @ Site
- 27/01/2020 - IPAF Health and Fitness Statement
- 27/01/2020 - OTS Courses
- 23/01/2020 - OTS' s preferred Charities for 2020
- 17/01/2020 - Working at Height Presentation
- 16/01/2020 - PPE
- 09/01/2020 - Working at Height Presentation
- 07/01/2020 - Working at Height Presentation
- 17/12/2019 - CSCS Card + IPAF
- 17/12/2019 - OTS are expanding in 2020
- 17/12/2019 - PPE
- 11/12/2019 - OTS are now taking bookings for 2020
- 09/12/2019 - Opening Times at OTS over the christmas period
- 06/12/2019 - IPAF Languages
- 29/11/2019 - Working at Height Regulations Training Session
- 25/11/2019 - Subscribe to our Newsletter
- 25/11/2019 - RAMS: Risk Assessments and Method Statements
- 25/11/2019 - Christmas Bookings
- 14/11/2019 - Working at Height Regulations
- 24/10/2019 - Do you need Confined Space Training
- 24/10/2019 - IPAF Training at Operator Training Services
- 24/10/2019 - PASMA Training
- 24/10/2019 - OTS Shop
- 24/10/2019 - OTS Newsletter
- 07/10/2019 - Minimising Falls from Height - Three vital steps
- 04/10/2019 - Working from Height Explained
- 13/09/2019 - Do you need a Replacement PASMA, Ladders or IPAF Card
- 13/09/2019 - Harness Training @ OTS
- 13/09/2019 - Abrasive Wheels Training
- 13/09/2019 - Manual Handling Training
- 13/09/2019 - Confined Space Training
- 13/09/2019 - Ladder Association Training Courses
- 13/09/2019 - OTS Newsletter
- 05/09/2019 - Falls from Height
- 09/08/2019 - Newsletter
- 24/04/2019 - Construction Industry Training
- 24/04/2019 - Ladder Association
- 24/04/2019 - Get a Grip
- 15/04/2019 - Get - a - Grip Ladder Safety Campaign
- 15/04/2019 - Training Courses
- 22/03/2019 - PASMA Training
- 22/03/2019 - Falls from Height
- 22/03/2019 - Working at Height
- 16/10/2018 - OTS are now taking bookings for 2019
- 16/08/2018 - OTS are now CITB Registered
- 15/06/2018 - Operator Training Services Ltd
- 19/03/2018 - IPAF and PASMA
- 02/02/2018 - PASMA Training Courses
- 02/02/2018 - FOR SALE Scissor Lift
- 05/12/2017 - Bookings for 2018
- 13/11/2017 - Training Courses
- 03/11/2017 - PASMA Tower Week
- 18/10/2017 - PASMA Tower Week
- 17/10/2017 - PASMA Working at Height Essentials Training
- 03/10/2017 - Basic Height Awareness
- 03/10/2017 - Abrasive Wheels
- 21/09/2017 - Ladder Loonie!!
- 13/09/2017 - OTS - Shop
- 13/09/2017 - OTS
- 05/09/2017 - Ladder Association
- 31/08/2017 - Confined Space Training
- 31/08/2017 - PASMA Training
- 31/08/2017 - IPAF Training
- 21/08/2017 - RRV Training at your own Site
- 17/08/2017 - Ladder Association
- 11/08/2017 - Working at Height Training Courses
