New KTE8000CS Submersible Level Sensors with Excellent Media Compatibility
08 April 2008
Sensortechnics’ new KTE8000CS submersible pressure transmitters offer precision hydrostatic level measurement for pressure ranges from 2.5 m water column (250 mbar).
The KTE8000CS series is based on very accurate and long-term stable ceramic pressure cells with excellent media compatibility. The sensors are enclosed in glass reinforced PPS (Polyphenylene Sulfide) plastic housings and are ideally suited for use with corrosive and aggressive media. The KTE8000CS series offers very competitive pricing for high-volume applications.
Due to its narrow outside diameter of only 24 mm, the rugged KTE8000CS level sensors easily fit into small-diameter probe tubes and tanks with small apertures. The transmitters are temperature compensated and supply a 4...20 mA output signal. Barometric pressure influences on the liquid level are compensated through a vent tube to the sensor element. Sensortechnics can also provide very fast and flexible mechanical or electronic sensor modifications for the KTE8000CS series based on customer specific requirements.
Important features of the new KTE8000CS series are:
Level ranges from 0...2.5 m water column (0…250 mbar) Full Scale
Ceramic pressure cells with excellent media compatibility
Highly chemical resistant PPS plastic housings
Custom mechanical or electronic sensor modifications
These new KTE8000CS submersible level probes are especially suited for salty, spring and waste waters and other highly corrosive and aggressive media. Typical applications include water level measurement, level control of tanks as well as level measurement and control of liquid supplies.
Other Press Releases By This Company
- 19/03/2018 - Series 9 offers wide range of APDs optimized for LIDAR applications
- 19/03/2018 - Piezoresistive manifold low pressure sensors from 1 mbar
- 04/01/2017 - Ultra-low differential pressure sensors with I²C bus and 3 V supply
- 07/11/2016 - Optical sensors from First Sensor lift off
- 22/07/2016 - First Sensor wins Best of Sensors Expo Award for Area View Kit
- 22/07/2016 - Series 9.5 APDs with enhanced NIR sensitivity up to 950 nm
- 08/12/2015 - Manifold mountable ultra-low differential pressure sensors
- 08/12/2015 - Solid-state silicon photomultipliers offer performance and application advantages
- 24/03/2015 - Custom sensors and complex systems allow for competitive advantages for OEM device manufacturers
- 24/03/2015 - Ultra-flat chip-scale package photodiodes for scanner systems
- 24/03/2015 - Stand-alone HDR-CMOS cameras with internal data evaluation
- 23/03/2015 - Precision inertial MEMS sensors offer ultra-high resolution
- 05/03/2015 - Precision inertial MEMS sensors offer ultra-high resolution
- 01/12/2011 - LBA Low Pressure Sensors Offer Special Versions With Highest Resolution for Respiration Applications
- 21/07/2011 - Sensortechnics offer Honeywells' new Silicon Pressure Sensors with single side liquid media option
- 27/06/2011 - Sensortechnics’ Highly Sensitive LBA Differential Pressure Sensors Offer New Ultra-Low Pressure Ranges From 25 Pa
- 13/04/2011 - Digital Miniature Ultra-Low Pressure Sensors - Offer I²C and Analog Output at the Same Time
- 16/04/2010 - High Accuracy HDI Pressure Sensors Offer 3 V Supply Versions
- 31/12/2009 - Sensortechnics launch new non-contact Capacitive Level Switch
- 10/12/2009 - New low energy Solenoid Valves provide high flows in miniature packages
- 20/11/2008 - Digital Pressure Sensors Offers Total Accuracy
- 03/11/2008 - Sensortechnics Launch Submersible OEM Transmitters to
- 08/04/2008 - New HCL Miniature Low Pressure Sensors for Ultra Stable and Accurate Measurements
- 08/04/2008 - New Proportional HF PRO Valve for Precision Control of High Flows up to 60 LPM
- 08/04/2008 - Miniature LQX16 Isolated Diaphragm Valves for Reliable Control of Aggressive Fluids
- 06/07/2007 - New Digital SPI Bus Pressure Sensors from Sensortechnics
