Company details for:
Ferrari Fan Technology UK Ltd
(0)
PO Box 265,
Herne Bay,
Kent,
CT6 9AZ,
United Kingdom
Quick Links:
Products
Axial Fans
Ferrari offer long cased and short cased axial fans.
Axial fans can be supplied in either belt of direct drive versions and are available in painted or galvanised steel and stainless steel.
The fans are available in a variety of mounting, inlet and discharge arrangements.
Fans are most suitable for the removal of clean ari, gasses and particulate in both HVAC and industrial processes including chemical, agricultural, painting, waste recycling and drying applications.
Axial Summary
Raging from 200mm to 2000mm diameter impellers
Up to 112m3/s (403,200m3/h)
Pressures up to 360mm wg (3,600Pa)
Aluminium impellers in steel casing.
Axial fans can be supplied in either belt of direct drive versions and are available in painted or galvanised steel and stainless steel.
The fans are available in a variety of mounting, inlet and discharge arrangements.
Fans are most suitable for the removal of clean ari, gasses and particulate in both HVAC and industrial processes including chemical, agricultural, painting, waste recycling and drying applications.
Axial Summary
Raging from 200mm to 2000mm diameter impellers
Up to 112m3/s (403,200m3/h)
Pressures up to 360mm wg (3,600Pa)
Aluminium impellers in steel casing.
Centrifugal Fans
All of our centrifugal fans are produced in carbon steel which is protected from corrosion by painting for cataphoresis with two-component polyurethane enamel RAL 7045.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C
Our standard belt driven arrangements are as follows:
• Arrangement 1: Fan coupling with belts. Support mounted on seat outside the air circuit. Bare shaft without transmission and without motor. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 9: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor supported by a flag fixed on the side of the chair. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 12: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor and fan supported by a foundation frame. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.For applications requiring up to 4500C, please enquire for more solutions.
Our standard motors of 2, 4, 6 poles with high efficiency three-phase power supply 230/400V 50Hz up to size 132 and 400/690V 50Hz for larger sizes. Degree of protection IP55, class F.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C
Our standard belt driven arrangements are as follows:
• Arrangement 1: Fan coupling with belts. Support mounted on seat outside the air circuit. Bare shaft without transmission and without motor. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 9: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor supported by a flag fixed on the side of the chair. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.
• Arrangement 12: Fan coupling with belts. Support and transmission mounted on seats outside the air circuit. Motor and fan supported by a foundation frame. Maximum air temperature 100 ° C. With cooling fan up to 300 ° C.For applications requiring up to 4500C, please enquire for more solutions.
Our standard motors of 2, 4, 6 poles with high efficiency three-phase power supply 230/400V 50Hz up to size 132 and 400/690V 50Hz for larger sizes. Degree of protection IP55, class F.
Direct Driven Centrifugal Fans
All of our centrifugal fans are produced in carbon steel which is protected from corrosion by painting for cataphoresis with two-component polyurethane enamel RAL 7045.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
Belt Driven Centrifugal Fans
All of our centrifugal fans are produced in carbon steel which is protected from corrosion by painting for cataphoresis with two-component polyurethane enamel RAL 7045.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
The standard arrangements for direct coupled fans are:
• Arrangement 4: Direct coupling. The impeller is connected directly on the shaft of the B3 mounted motor that is supported by the pedestal. Maximum air temperature 100°C. With cooling fan up to 220°C.
• Arrangement 5: Direct coupling. The impeller set directly on the shaft of the B5 mounted motor supported by a disc fixed on the side of the case.
• Arrangement 8: Joint coupling. The fan has a support and motor mounted on a chair outside the air circuit. Maximum air temperature 100°C. With cooling fan up to 300°C.
Fast Lane Centrifugals
Our Fast Lane Centrifugal fans are available to any customer in a hurry for a fan, all fans are in arrangement 4 and are direct driven. We can offer either WEG or Simotop branded motors suitable for inverter control.
High Pressure Centrifugal Fans
Single Inlet Single Width (SISW) high pressure centrifugal fans in direct or belt driven arrangements with either forward curved on backward curved impellers.
The ranges are summarised below
FA, FC, FE, FG…/P
High pressure (up to 2000mm w g) low capacity (up to 5.0m3/s) clean and dusty air.
Forward curved multi-vane impellers. Fan size up to
FA: Pt max 1600mm w g − Q max. 0.25m3/s
FC: Pt max 2000mm w g − Q max. 1.40m3/s
FE: Pt max 1800mm w g − Q max. 2.20m3/s
FG: Pt max 1800mm w g − Q max. 5.00m3/s
FA, FC, FE, FG…/N
High pressure (up to 2500mm w g) low-medium capacity (up to10.0m3/s) clean and air. Backward curved impellers. Fan size up to 2000mm
FC: Pt max 2500mm w g − Q max. 1.80m3/s
FE: Pt max 2500mm w g − Q max. 2.50m3/s
FG: Pt max 2000mm w g − Q max. 6.00m3/s
FI: Pt max 1900mm w g − Q max. 10.00m3/s
FP: Pt max 800mm w g − Q max. 12.00m3/s
The ranges are summarised below
FA, FC, FE, FG…/P
High pressure (up to 2000mm w g) low capacity (up to 5.0m3/s) clean and dusty air.
Forward curved multi-vane impellers. Fan size up to
FA: Pt max 1600mm w g − Q max. 0.25m3/s
FC: Pt max 2000mm w g − Q max. 1.40m3/s
FE: Pt max 1800mm w g − Q max. 2.20m3/s
FG: Pt max 1800mm w g − Q max. 5.00m3/s
FA, FC, FE, FG…/N
High pressure (up to 2500mm w g) low-medium capacity (up to10.0m3/s) clean and air. Backward curved impellers. Fan size up to 2000mm
FC: Pt max 2500mm w g − Q max. 1.80m3/s
FE: Pt max 2500mm w g − Q max. 2.50m3/s
FG: Pt max 2000mm w g − Q max. 6.00m3/s
FI: Pt max 1900mm w g − Q max. 10.00m3/s
FP: Pt max 800mm w g − Q max. 12.00m3/s
Medium Pressure Centrifugal Fans
Single Inlet Single Width (SISW) and Double Inlet Double Width (DIDW) centrifugal fans in direct or belt driven arrangements with forward curved or backward curved impellers.
8 impeller designs
Airflow volumes up to 200m3/s (720,000m3/h)
'Gas tight' versions for aggressive environments
Temperartures up to 4500C are possible
Temperatures as low as -600C in our ARCTIC range
Variety of finishes include painted mild steel, hot dipped galvanised and 2 grades of stainless steel
8 impeller designs
Airflow volumes up to 200m3/s (720,000m3/h)
'Gas tight' versions for aggressive environments
Temperartures up to 4500C are possible
Temperatures as low as -600C in our ARCTIC range
Variety of finishes include painted mild steel, hot dipped galvanised and 2 grades of stainless steel
Low Pressure Centrifugal Fans
Single Inlet Single Width (SISW) and Double Inlet Double Width (DIDW) low pressure centrifugal fans in direct or belt driven arrangements with either forward curved on backward curved impellers.
The range is summarised below
FR/N (single inlet)
Low pressure (up to 250mm w g) high capacity (up to 90m3/s) clean air. Backward curved impellers. Fan size up to 2000mm
TFR/N (roof fan)
Low pressure (up to 100mm w g) capacity (up to 5m3/s) clean air. Backward curved impellers. Fan size up to 710mm
DFR/N (double inlet)
Low pressure (up to 250mm w g) high capacity (up to 130m3/s) clean air. Backward curved impellers. Fan size up to 2000mm
CFR/N (double inlet)
Low pressure (up to 250mm w g) high capacity (up to 130m3/s) hot air up to 3000C. Backward curved impellers. Fan size up to 2000mm
FS/P (single inlet)
Low pressure (up to 150mm w g) high capacity (up to 25m3/s) dusty or clean air
Forward curved multi-vane impellers. Fan size up to 1000mm
The range is summarised below
FR/N (single inlet)
Low pressure (up to 250mm w g) high capacity (up to 90m3/s) clean air. Backward curved impellers. Fan size up to 2000mm
TFR/N (roof fan)
Low pressure (up to 100mm w g) capacity (up to 5m3/s) clean air. Backward curved impellers. Fan size up to 710mm
DFR/N (double inlet)
Low pressure (up to 250mm w g) high capacity (up to 130m3/s) clean air. Backward curved impellers. Fan size up to 2000mm
CFR/N (double inlet)
Low pressure (up to 250mm w g) high capacity (up to 130m3/s) hot air up to 3000C. Backward curved impellers. Fan size up to 2000mm
FS/P (single inlet)
Low pressure (up to 150mm w g) high capacity (up to 25m3/s) dusty or clean air
Forward curved multi-vane impellers. Fan size up to 1000mm
Industrial Fan Services
Industrial Fans, is a firm with experience in the design and manufacture of standard and specialist fans for over 60 years.
Industrial Fan Services have a back-up site facility second to none. With our team of highly competent experienced engineers, armed with top class balancing and analysis machines, we ensure that customers can feel confident in installing our equipment just about anywhere in the world, however sophisticated it might be.
Industrial Fan Services manufacture fans to the following:-
· Volumes from 100M³/Hr to 1,600,000M³/Hr
· Pressures from 20mm to 6,000mm
· Temperature Range -50°C to + 1000°C
· Fans Manufactured from:- Mild Steel − 304,316,321 Stainless steel − Aluminium − Hasteloy − Incaloy Monel − RA330 and many other Alloys
· Fans Coated with:- Rubber − PVC − PTFE − Halar − Two pack Epoxy + Powder Coating
Industrial Fan Services have a back-up site facility second to none. With our team of highly competent experienced engineers, armed with top class balancing and analysis machines, we ensure that customers can feel confident in installing our equipment just about anywhere in the world, however sophisticated it might be.
Industrial Fan Services manufacture fans to the following:-
· Volumes from 100M³/Hr to 1,600,000M³/Hr
· Pressures from 20mm to 6,000mm
· Temperature Range -50°C to + 1000°C
· Fans Manufactured from:- Mild Steel − 304,316,321 Stainless steel − Aluminium − Hasteloy − Incaloy Monel − RA330 and many other Alloys
· Fans Coated with:- Rubber − PVC − PTFE − Halar − Two pack Epoxy + Powder Coating
Plug Fans
We are now able to offer a range of Plug fans (direct drive centrifugal fans without casing) for use in plenum applications
Plug fan summary
2 impeller designs with backward inclined impeller blades
Sizes ranging from 350 to 1250mm diameter
Air volumes up to 125m3/s (450,000m3/h)
Pressure of up to 400 mm wg (4,000Pa)
Plug fan summary
2 impeller designs with backward inclined impeller blades
Sizes ranging from 350 to 1250mm diameter
Air volumes up to 125m3/s (450,000m3/h)
Pressure of up to 400 mm wg (4,000Pa)
ATEX Fans
Ferrari have a selection of centrifugal, axial and roof fans that can be manufactured with special anti-sparking materials which are ATEX certified.
Ferrari have the approvals and can supply these fans for both gas and dust explosive atmospheres. The products can be supplied for equipment group II, equipment group 2 and 3, zones 1 and 2 (gas) and zones 21 and 22 (dust).
The application reference standards are as follows (NON-EXHASTIVE LIST):
Directive 2014/34/EU ATEX Directive
Directive 99/9/EC Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres.
UNI EN 14986 Design of fans working in potentially explosive atmospheres.
UNI EN 1127-1 Explosive atmospheres - explosion provention and protection - basic concepts and methodology.
UNI EN 13643-1 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirments.
UNI EN 13643-5 Non- electrical equipment intended for the use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c".
VDMA 24167 Ventilatoren: Sicherheitsanforderungen (Fans: Safety requirements).
EUROVENT 1/5-99 Specification for fan construction and the use to reduce the ignition risk in potentially explosive atmospheres.
IEC/CEI EN 60079 Electrical apparatus for explosive gas atmospheres - Part 0: Equiment general requirments; Part 20-1: Material characteristics for gas and vapour classification - Test methods and data; Part 10: Classification of areas; Part 14: Electrical installations in hazardous areas with combustible gasses (other than mines).
CEI EN 61241-10 Classification of areas where combusible dusts are or may be present.
Ferrari have the approvals and can supply these fans for both gas and dust explosive atmospheres. The products can be supplied for equipment group II, equipment group 2 and 3, zones 1 and 2 (gas) and zones 21 and 22 (dust).
The application reference standards are as follows (NON-EXHASTIVE LIST):
Directive 2014/34/EU ATEX Directive
Directive 99/9/EC Minimum requirements for improving the safety and health protection of workers potentially at risk from explosive atmospheres.
UNI EN 14986 Design of fans working in potentially explosive atmospheres.
UNI EN 1127-1 Explosive atmospheres - explosion provention and protection - basic concepts and methodology.
UNI EN 13643-1 Non-electrical equipment for use in potentially explosive atmospheres - Part 1: Basic method and requirments.
UNI EN 13643-5 Non- electrical equipment intended for the use in potentially explosive atmospheres - Part 5: Protection by constructional safety "c".
VDMA 24167 Ventilatoren: Sicherheitsanforderungen (Fans: Safety requirements).
EUROVENT 1/5-99 Specification for fan construction and the use to reduce the ignition risk in potentially explosive atmospheres.
IEC/CEI EN 60079 Electrical apparatus for explosive gas atmospheres - Part 0: Equiment general requirments; Part 20-1: Material characteristics for gas and vapour classification - Test methods and data; Part 10: Classification of areas; Part 14: Electrical installations in hazardous areas with combustible gasses (other than mines).
CEI EN 61241-10 Classification of areas where combusible dusts are or may be present.
Smoke Extract
Ferrari offer a range in both centrifugal and axial fans. Ferrari have the approvals and can supply a wide range of fans for smoke extraction in fire applications where safe evacuation of personnel is required.
FR range centrifugal fans are certified 400 degrees C for two hours (F400)
SR range of centrifugal fans are certified 600 degrees C for two hours (F600)
EF range of axial fans are certified 400 degrees C for two hours (F400)
SF range of axial fans are certified 600 degrees C for two hours (F600).
Ferrari also offer jet fans for the extraction of smoke.
Jet fans can be supplied for tunnel and car park extraction systems. We offer fans with uni-directional as well as reversible functionality.
These fans are certified to EN12101-3 rated F300 (300 degrees C for two hours) or F400 (400 degrees C for two hours)
There are 12 sizes in the range from 315mm to 1250mm diameter impellers. We will undertake Computational Fluid Dynamic (CFD) ananlysis if required. We offer complete package of products including control system (links fans, sensors, warning devices with fire alarm system) CO sensors, accousitc warning sounders and warning lights.
FR range centrifugal fans are certified 400 degrees C for two hours (F400)
SR range of centrifugal fans are certified 600 degrees C for two hours (F600)
EF range of axial fans are certified 400 degrees C for two hours (F400)
SF range of axial fans are certified 600 degrees C for two hours (F600).
Ferrari also offer jet fans for the extraction of smoke.
Jet fans can be supplied for tunnel and car park extraction systems. We offer fans with uni-directional as well as reversible functionality.
These fans are certified to EN12101-3 rated F300 (300 degrees C for two hours) or F400 (400 degrees C for two hours)
There are 12 sizes in the range from 315mm to 1250mm diameter impellers. We will undertake Computational Fluid Dynamic (CFD) ananlysis if required. We offer complete package of products including control system (links fans, sensors, warning devices with fire alarm system) CO sensors, accousitc warning sounders and warning lights.
Smoke Rated Fans
Fans for Smoke and Fume extraction according to BS EN12101-3
Centrifugal Fans
Ferrari have the approvals and can supply fans for smoke extraction in fire applications where safe evacuation of personnel is required.
Centrifugal fans that are certified 400 degrees C for 2 hours (F400)
Complying to the EN12101-3 European standards.
Centrifugal Fans
Ferrari have the approvals and can supply fans for smoke extraction in fire applications where safe evacuation of personnel is required.
Centrifugal fans that are certified 400 degrees C for 2 hours (F400)
Complying to the EN12101-3 European standards.
Bifurcated Fans
Ferrari offer bifurcated fans which are ideal for applications involving exhausting or recirculation of gases and hot air. Bifurcated fans are specially designed for applications where it is required to keep the motor out of the airstream. This could be due to temperature or the type of fumes or gases being used.
Fan Accessories
Ferrari offer a large range of accessories in a range of different materials and sizes.
We offer inlet and outlet guards
Inspection doors,
Drain plugs,
Anti-sparking materials,
AISI 304 Stainless steel,
AISI 316 Stainless steel,
Hot dip galvanised,
Silencers,
Inlet and outlet flanges,
Inlet and outlet flexible connections,
Anti-vibration mounts,
Guide Vanes,
Back blades,
Filter boxes,
Bell mouth inlet,
Vibration control sensors,
Speed control sensors,
Dampers,
Temperature sensors,
Inverter drives,
Insulated casings,
Corten impellers,
Shaft seals,
Pressure measurement tappings.
If there are any other accessories you may require please visit our website or contact us.
We offer inlet and outlet guards
Inspection doors,
Drain plugs,
Anti-sparking materials,
AISI 304 Stainless steel,
AISI 316 Stainless steel,
Hot dip galvanised,
Silencers,
Inlet and outlet flanges,
Inlet and outlet flexible connections,
Anti-vibration mounts,
Guide Vanes,
Back blades,
Filter boxes,
Bell mouth inlet,
Vibration control sensors,
Speed control sensors,
Dampers,
Temperature sensors,
Inverter drives,
Insulated casings,
Corten impellers,
Shaft seals,
Pressure measurement tappings.
If there are any other accessories you may require please visit our website or contact us.
F400 ATEX Fan
Ferrari Fan Technology are pleased to announce the launch our new ATEX rated F400 fire fan.
This new product is available in limited sizes of our direct driven centrifugal FQ range, handing options are LG0 and RD0.
Each fan will be smoke rated at F400 which has been tested at 400 degC for 120mins, also the fan will be certified ATEX IIB 3G T3 for hazardous gases.
The smoke rated certification meets the EN12101-3 for F400 and can be used for dual purpose of air ventilation and smoke extract in the event of a fire to provide safe evacuation.
Fans will be supplied with an ATEX motor and will be suitable for Zone 2 Gases, which covers where an explosive atmosphere is not likely to occur but if it does will persist for a short period.
These fans are ideal for pharmaceutical or chemical industries, they will allow safe working environment from hazardous gases and allow safe evacuation in the event of a fire.
We are also offering a range of fan factory fitted features and accessories.
This new product is available in limited sizes of our direct driven centrifugal FQ range, handing options are LG0 and RD0.
Each fan will be smoke rated at F400 which has been tested at 400 degC for 120mins, also the fan will be certified ATEX IIB 3G T3 for hazardous gases.
The smoke rated certification meets the EN12101-3 for F400 and can be used for dual purpose of air ventilation and smoke extract in the event of a fire to provide safe evacuation.
Fans will be supplied with an ATEX motor and will be suitable for Zone 2 Gases, which covers where an explosive atmosphere is not likely to occur but if it does will persist for a short period.
These fans are ideal for pharmaceutical or chemical industries, they will allow safe working environment from hazardous gases and allow safe evacuation in the event of a fire.
We are also offering a range of fan factory fitted features and accessories.
Commercial & Domestic Fans
Axial impeller types - Silent, EcoWatt ranges in 3 sizes 90-320m3/h.
Various finishes and accessories avialable.
Various finishes and accessories avialable.
Plastic Fans
These are our centrifugal impeller corrosion-resistant fans made of synthetic materials. They are particularly useful for projects that require ATEX classifications or in applications that use very corrosive liquids.
Our range of plastic fans are available with EC motors and come in direct or belt driven for a range of different applications.
The fans range from as small as 100mm in diameter to up to 1,000mm in diameter, with a wide range of accessories and specific features such as an insulated case.
Our range of plastic fans are available with EC motors and come in direct or belt driven for a range of different applications.
The fans range from as small as 100mm in diameter to up to 1,000mm in diameter, with a wide range of accessories and specific features such as an insulated case.
Special Fans
We can manufacture our fans in special executions to suit the process including: fan sizes, special finishes, arrangements, sound proofing, insulation and more.
Industrial Fan Accessories
To complement our fans we offer a comprehensive range of accessories including:-
Silencers
Inlet flanges
Inlet flexible connections
Discharge flanges
Discharge flexible connections
Anti vibration mounts
Inlet guide vanes
Dampers
Inlet filter boxes
Bell mouth inlets
Inlet and discharge guards
Our factory fitted options include the following
Inspection doors
Casing drain
Vibration control sensors
Speed control sensors
Temperature sensors
Pressure measurement tappings
Insulated case (50mm Rockwool) for thermal protection and/or noise supression
Shaft seals (graphite seal, Labyrinth seal, stuffing boxes grade 0 and grade 3)
Wearproof construction (special materials)
Silencers
Inlet flanges
Inlet flexible connections
Discharge flanges
Discharge flexible connections
Anti vibration mounts
Inlet guide vanes
Dampers
Inlet filter boxes
Bell mouth inlets
Inlet and discharge guards
Our factory fitted options include the following
Inspection doors
Casing drain
Vibration control sensors
Speed control sensors
Temperature sensors
Pressure measurement tappings
Insulated case (50mm Rockwool) for thermal protection and/or noise supression
Shaft seals (graphite seal, Labyrinth seal, stuffing boxes grade 0 and grade 3)
Wearproof construction (special materials)
About us
Ferrari Fan Technology (UK) Ltd established since 2006, are in house manufacturers of laser cutting, punching, folding, spinning, welding, painting, testing and assembly, with more than 35,000 fans being produced each year.
We provide fans to a wide range of industries including steel, pharmaceutical, railroad, power regeneration and recycling. Our factory is certified ISO 9001, ISO 14001 and OHSAS 18001.
The Ferrari product ranges are complemented by other fan manufacturers which help us to provide total ventilation solutions.
Ferrari Fan Technology Product Range Includes:
Centrifugal Fans
We provide a diverse selection of centrifugal fans, available in both direct and belt-driven configurations, designed to accommodate a wide spectrum of sizes and pressure requirements. Whether it's for ventilation systems, industrial processes, specific applications, or various industries, our offerings cater to a multitude of needs. From small-scale setups to large industrial operations, our fans are engineered to deliver optimal performance and efficiency, ensuring effective air circulation and ventilation across different environments and sectors.
Axial Fans
We provide a comprehensive array of axial fans, featuring both direct and belt-driven mechanisms, tailored to accommodate a diverse range of sizes and pressure specifications. Our offerings are meticulously crafted to meet the varied needs of ventilation systems, industrial processes, specialised applications, and a wide spectrum of industries. Whether it's enhancing air quality in commercial buildings, optimising airflow in manufacturing facilities, or supporting specific industrial processes, our axial fans are engineered to deliver superior performance and reliability. With options suitable for different industries and applications, our fans ensure efficient ventilation and airflow management across various sectors, contributing to enhanced productivity and comfort.
ATEX Fans
We specialise in ATEX-certified fans, available in both centrifugal and axial designs, specifically designed for use in environments where there's a risk of explosion. Our fans adhere to the European Regulation 2014/34/EU (ATEX) standards, ensuring compliance for applications in Zones 1 and 2 for gases and Zones 21 and 22 for dust. These fans are meticulously engineered to meet stringent safety requirements, providing reliable ventilation solutions for hazardous environments prone to explosive risks.
Plastic Fans
These centrifugal impeller fans, constructed from corrosion-resistant synthetic materials, stand out as ideal solutions for projects necessitating ATEX classifications or applications involving highly corrosive liquids. Our collection of plastic fans, equipped with EC motors, offers versatility in both direct and belt-driven configurations to cater to various application needs. Ranging from compact 100mm diameter models to expansive 1,000mm diameter options, these fans are complemented by an extensive array of accessories and specialised features, including insulated casing, ensuring suitability for diverse environments and requirements.
Fast Lane Fans
Our Fast Lane Centrifugal fans are readily accessible to customers in urgent need of a fan solution. All fans are configured in arrangement 4 and feature direct drive. We provide the option of either WEG or Simotop branded motors, both compatible with inverter control, ensuring flexibility and efficiency in operation.
Smoke Rated Fans
We possess certifications for high-temperature smoke extract fans designed for both smoke and fume extraction purposes, meeting the EN12101-3 standards. Our lineup includes centrifugal and axial fans certified as dual-purpose units, suitable for F300, F400, and F600 applications.
... And more.
Ferrari Fan Technology products are suitable for cooling, heating and ventilation in HVAC and Industrial Process markets. We use aerofoil technology in our impeller blade design to provide you with reliable, high efficiency fans absorb low levels of power and provide quiet noise levels. We specialise in Atex fans for petro-chemical markets where there is a risk of explosion.
Our Ferrari fans can be found in dryers, classifiers, scrubbers, boilers, laboratory extract and more. We can supply GOST Certificate for products used in the Russian market as well as offering a range of 9 AMCA Certified Centrifugal fans.
We provide fans to a wide range of industries including steel, pharmaceutical, railroad, power regeneration and recycling. Our factory is certified ISO 9001, ISO 14001 and OHSAS 18001.
The Ferrari product ranges are complemented by other fan manufacturers which help us to provide total ventilation solutions.
Ferrari Fan Technology Product Range Includes:
Centrifugal Fans
We provide a diverse selection of centrifugal fans, available in both direct and belt-driven configurations, designed to accommodate a wide spectrum of sizes and pressure requirements. Whether it's for ventilation systems, industrial processes, specific applications, or various industries, our offerings cater to a multitude of needs. From small-scale setups to large industrial operations, our fans are engineered to deliver optimal performance and efficiency, ensuring effective air circulation and ventilation across different environments and sectors.
Axial Fans
We provide a comprehensive array of axial fans, featuring both direct and belt-driven mechanisms, tailored to accommodate a diverse range of sizes and pressure specifications. Our offerings are meticulously crafted to meet the varied needs of ventilation systems, industrial processes, specialised applications, and a wide spectrum of industries. Whether it's enhancing air quality in commercial buildings, optimising airflow in manufacturing facilities, or supporting specific industrial processes, our axial fans are engineered to deliver superior performance and reliability. With options suitable for different industries and applications, our fans ensure efficient ventilation and airflow management across various sectors, contributing to enhanced productivity and comfort.
ATEX Fans
We specialise in ATEX-certified fans, available in both centrifugal and axial designs, specifically designed for use in environments where there's a risk of explosion. Our fans adhere to the European Regulation 2014/34/EU (ATEX) standards, ensuring compliance for applications in Zones 1 and 2 for gases and Zones 21 and 22 for dust. These fans are meticulously engineered to meet stringent safety requirements, providing reliable ventilation solutions for hazardous environments prone to explosive risks.
Plastic Fans
These centrifugal impeller fans, constructed from corrosion-resistant synthetic materials, stand out as ideal solutions for projects necessitating ATEX classifications or applications involving highly corrosive liquids. Our collection of plastic fans, equipped with EC motors, offers versatility in both direct and belt-driven configurations to cater to various application needs. Ranging from compact 100mm diameter models to expansive 1,000mm diameter options, these fans are complemented by an extensive array of accessories and specialised features, including insulated casing, ensuring suitability for diverse environments and requirements.
Fast Lane Fans
Our Fast Lane Centrifugal fans are readily accessible to customers in urgent need of a fan solution. All fans are configured in arrangement 4 and feature direct drive. We provide the option of either WEG or Simotop branded motors, both compatible with inverter control, ensuring flexibility and efficiency in operation.
Smoke Rated Fans
We possess certifications for high-temperature smoke extract fans designed for both smoke and fume extraction purposes, meeting the EN12101-3 standards. Our lineup includes centrifugal and axial fans certified as dual-purpose units, suitable for F300, F400, and F600 applications.
... And more.
Ferrari Fan Technology products are suitable for cooling, heating and ventilation in HVAC and Industrial Process markets. We use aerofoil technology in our impeller blade design to provide you with reliable, high efficiency fans absorb low levels of power and provide quiet noise levels. We specialise in Atex fans for petro-chemical markets where there is a risk of explosion.
Our Ferrari fans can be found in dryers, classifiers, scrubbers, boilers, laboratory extract and more. We can supply GOST Certificate for products used in the Russian market as well as offering a range of 9 AMCA Certified Centrifugal fans.
Images
