Company details for:
Norbar Torque Tools Ltd
(1)
Wildmere Road,
Banbury,
Oxfordshire,
OX16 3JU,
United Kingdom
Quick Links:
Products
Torque Screwdrivers
Norbar's range of Torque Screwdrivers embodies the values of the TT Series brand: accuracy, ease of use and comfort in use.
With an accuracy that exceeds the requirement of ISO6789 (±6% for tools up to 10 N·m). Furthermore, they are engineered to retain this accuracy over many thousands of tightened cycles.
Available in N·m, lbf·in or production 'P' Type models
With an accuracy that exceeds the requirement of ISO6789 (±6% for tools up to 10 N·m). Furthermore, they are engineered to retain this accuracy over many thousands of tightened cycles.
Available in N·m, lbf·in or production 'P' Type models
Torque Wrenches
Norbar Torque Tools manufacture an extensive range of high quality torque wrenches to cover torque values from 1 N·m to 2000 N·m. They are designed and manufactured to exceed international standards for accuracy.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 650 N·m.
In addition to the normal 'adjustable' torque wrenches, Norbar offer Production 'P' Type versions which can be pre-set and dedicated to a particular application. This setting system is designed to discourage unauthorised alteration.
All Norbar torque wrenches are offered as standard with a quality ratchet. For applications where interchangeable end fittings are required, 'Torque Handles' are also available in various models up to 650 N·m.
Manual Torque Multipliers
Norbar gearboxes are built to an extremely high standard of precision. All gears rotate on needle roller bearings about hardened and ground journal pins. As a result, Norbar HandTorques can be relied upon to have a torque multiplication accuracy of +/-4%, throughout the operating range, taking the uncertainty out of high torque tightening.
No gearbox is 100% efficient and so the velocity ratio (the number of turns that the input has to make to achieve one revolution of the output) is not the same as the torque multiplication ratio. Norbar multipliers are engineered such that each gear stage has a velocity ratio of typically 5.45:1 which results in a true torque multiplication factor of 5:1.
Torque output calculations are therefore a matter of simple arithmetic with little risk of incorrect bolt loading due to conversion errors. Other manufacturer's multipliers often require graphs or formulae to calculate the input torque to achieve a particular output.
The Norbar HandTorque is the most comprehensive multiplier range available. Standard products are available up to 47,500 N·m (35,000 lbf·ft) and 'specials' to 300,000 N·m (220,000 lbf·ft). A range of 'nose extensions' for reaching difficult to access bolts and full range of torque transducers for highly accurate torque monitoring are available.
No gearbox is 100% efficient and so the velocity ratio (the number of turns that the input has to make to achieve one revolution of the output) is not the same as the torque multiplication ratio. Norbar multipliers are engineered such that each gear stage has a velocity ratio of typically 5.45:1 which results in a true torque multiplication factor of 5:1.
Torque output calculations are therefore a matter of simple arithmetic with little risk of incorrect bolt loading due to conversion errors. Other manufacturer's multipliers often require graphs or formulae to calculate the input torque to achieve a particular output.
The Norbar HandTorque is the most comprehensive multiplier range available. Standard products are available up to 47,500 N·m (35,000 lbf·ft) and 'specials' to 300,000 N·m (220,000 lbf·ft). A range of 'nose extensions' for reaching difficult to access bolts and full range of torque transducers for highly accurate torque monitoring are available.
Pneumatic Torque Tools
Hand operated torque multipliers are ideal for low volume or intermittent use or when there is no power source available. However, for production lines or whenever a large number of bolts is involved, a powered multiplier will save a considerable amount of time.
PneuTorque operation is quiet - less than 85dB(A) with absolutely no impacting. These two factors make PneuTorques comfortable for the operator to use, reducing fatigue and consequently increasing safety.
PneuTorques provide accurate torque control - on a given joint they will stall repeatably to within ±5%. Using electronic shut off, this repeatability can be improved to ±2%.
The PneuTorque consists of a robust air motor driving a Norbar multiplier with three or more stages of epicyclic gearing.
Torque control is achieved by adjustment of the air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool and allows specific torque values to be set. For more critical applications, PneuTorques can be fitted with a torque transducer and the precise torque output displayed. The tool can then be shut off at the desired torque either manually or automatically using suitable control circuitry.
Models are available up to 300,000 N·m (220,000 lbf·ft).
PneuTorque operation is quiet - less than 85dB(A) with absolutely no impacting. These two factors make PneuTorques comfortable for the operator to use, reducing fatigue and consequently increasing safety.
PneuTorques provide accurate torque control - on a given joint they will stall repeatably to within ±5%. Using electronic shut off, this repeatability can be improved to ±2%.
The PneuTorque consists of a robust air motor driving a Norbar multiplier with three or more stages of epicyclic gearing.
Torque control is achieved by adjustment of the air pressure. An air pressure versus torque graph and a calibration certificate is supplied with each tool and allows specific torque values to be set. For more critical applications, PneuTorques can be fitted with a torque transducer and the precise torque output displayed. The tool can then be shut off at the desired torque either manually or automatically using suitable control circuitry.
Models are available up to 300,000 N·m (220,000 lbf·ft).
Electronic Torque Tools
Norbar's electronic torque tool utilises patent pending motor technology and control software to give unprecedented joint control.
Traditional electronic torque tools give vastly different results depending on the joint type. Norbar's intelligent joint sensing eliminates these issues so that you can be confident in your bolting work.
Traditional electronic torque tools give vastly different results depending on the joint type. Norbar's intelligent joint sensing eliminates these issues so that you can be confident in your bolting work.
Reactions & Accessories for Multipliers
All Norbar torque multipliers are supplied as standard with a reaction plate, but where the standard option is not suitable other options are available.
Nose Extensions are also available for Norbar HandTorque, PneuTorque and EvoTorque multipliers for situations where tool access is restricted.
Nose Extensions are also available for Norbar HandTorque, PneuTorque and EvoTorque multipliers for situations where tool access is restricted.
Torque Measurement
Norbar's torque transducers have established an excellent reputation based on exceptional quality and accuracy. A very wide torque range is covered, 0.04 N·m to 100,000 N·m and three basic transducer configurations are offered; Static, Impulse Rotary and Annular.
All transducers up to 100,000 N·m are supplied as standard with a UKAS accredited calibration certificate from Norbar's in-house laboratory.
For customers who wish to take advantage of Norbar's transducers but have an existing, non Norbar display instrument, transducers can be provided with a mV/V calibration.
Norbar's instruments and transducers are complimented by a wide range of ancillary products. Within this group are the products that would be required to set up a torque calibration laboratory, for example, torque wrench loaders meeting ISO requirements and precision beam and weight systems for calibration of torque transducers.
All transducers up to 100,000 N·m are supplied as standard with a UKAS accredited calibration certificate from Norbar's in-house laboratory.
For customers who wish to take advantage of Norbar's transducers but have an existing, non Norbar display instrument, transducers can be provided with a mV/V calibration.
Norbar's instruments and transducers are complimented by a wide range of ancillary products. Within this group are the products that would be required to set up a torque calibration laboratory, for example, torque wrench loaders meeting ISO requirements and precision beam and weight systems for calibration of torque transducers.
Calibration Equipment
Norbar's Test Beams are designed for the static calibration of Torque Transducers. They are ideally suited to Norbar's transducers, but can be employed on other manufacturer's equipment.
Torque is generated by the application of a known force at a known radius from the centre of rotation of the torque transducer.
Designed to remove potential sources of measurement error, these beams can be used to calibrate Norbar torque transducers, and torque transducers from other manufacturers (where design permits), as well as mechanical test devices. UKAS length certification is provided with each beam.
The Beams are designed with square drives machined to the top limit of ISO 2725:1987. This minimises any play between the beam and the transducer. However, a combination of square drive tolerances,
misalignment of fittings and elastic rotation of the transducer shaft inevitably cause the beam to rotate from the horizontal under load.
Norbar's Radius Ended Beams are designed with a +/-8% degree usable arc within which the calibration accuracy is unaffected.
Additionally the beams are designed to apply load on a vertical plane which cuts through the square drive inside the transducer. This minimises bending moments on the transducer and, for safe operation, ensures that the beam will not fall out of the transducer.
Torque is generated by the application of a known force at a known radius from the centre of rotation of the torque transducer.
Designed to remove potential sources of measurement error, these beams can be used to calibrate Norbar torque transducers, and torque transducers from other manufacturers (where design permits), as well as mechanical test devices. UKAS length certification is provided with each beam.
The Beams are designed with square drives machined to the top limit of ISO 2725:1987. This minimises any play between the beam and the transducer. However, a combination of square drive tolerances,
misalignment of fittings and elastic rotation of the transducer shaft inevitably cause the beam to rotate from the horizontal under load.
Norbar's Radius Ended Beams are designed with a +/-8% degree usable arc within which the calibration accuracy is unaffected.
Additionally the beams are designed to apply load on a vertical plane which cuts through the square drive inside the transducer. This minimises bending moments on the transducer and, for safe operation, ensures that the beam will not fall out of the transducer.
Harsh Environment Range
The Harsh Environment Range is a range of measurement and calibration equipment that has been tested to conform to EN 60529:1992. Rated to IP65/67 the products are protected against dust ingression, pressurised water jet and complete water immersion to a 1 meter depth for a 30 minute period.
Ultrasonic Bolt Measurement
In certain critical bolting applications, factors such as friction or bolt/joint geometry are such that the measurement of applied torque alone will not provide the degree of accuracy necessary to control the preload to be monitored over the service life of the fastener. In these applications, ultrasonic measurement of fastener elongation and/or load has frequently proven to be the most accurate, reliable and cost effective solution.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end. Using material constants, the USM-3 converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-3 will again utilise material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-3 uses state of the art hardware and software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recording and transmission of data, in addition to analog signal output the USM-3 provides a complete system for measurement, recording, and control of fastener tension in the most demanding applications.
Ultrasonic measurement of bolt preload is made possible by introducing a sonic pulse at one end of the fastener and accurately measuring the time of flight (TOF) required for the echo to return from the opposite end. Using material constants, the USM-3 converts this TOF into an "ultrasonic length" of the fastener, providing a baseline from which future measurements will be made. When the fastener is tightened, the TOF increases and the USM-3 will again utilise material constants to eliminate the effects of stress and temperature variations on sound velocity, providing an accurate elongation or load measurement.
The USM-3 uses state of the art hardware and software to achieve these measurements with maximum automation, and minimizes the need for operator interpretation. Offering digital recording and transmission of data, in addition to analog signal output the USM-3 provides a complete system for measurement, recording, and control of fastener tension in the most demanding applications.
Calibration Certificate Software
This easy to use software allows data from a Norbar torque measuring instrument to be down loaded onto a PC and formatted as a torque calibration certificate.
Torque Calibration
Users of torque equipment all over the world are realising the importance of calibration in maintaining traceability and quality of operations.
Norbar has produced torque calibration equipment for over 60 years, and our UKAS accredited Laboratory is one of the finest in the world.
In addition to our UK laboratory we now we have Norbar torque calibration laboratories in the United States, Australia, Singapore and China for customers in those regions of the world and for whom quality service and fast turnaround time is paramount in seeking torque calibration.
All of our laboratories are assessed by government agencies to ISO 17025:2005.
Norbar has produced torque calibration equipment for over 60 years, and our UKAS accredited Laboratory is one of the finest in the world.
In addition to our UK laboratory we now we have Norbar torque calibration laboratories in the United States, Australia, Singapore and China for customers in those regions of the world and for whom quality service and fast turnaround time is paramount in seeking torque calibration.
All of our laboratories are assessed by government agencies to ISO 17025:2005.
Calibration Services
We are required in line with UKAS requirements, to offer as standard, a calibration of your equipment ’As Found’ on receipt by the Laboratory. Devices sent in for ’UKAS’* calibration will be calibrated and the ’As Found’ readings recorded. The calibration will be performed to the appropriate British Standards unless requested otherwise.
1. Should the device be in specification ’As Found’, a certificate will be raised and the device returned.
2. Should the device be out of specification, but capable of adjustment, it will be adjusted, ’As Left’ readings taken, and one certificate raised with ’As Found’ and ’As Left’ readings on it.
3. Should the device not be capable of adjustment, it will be returned, with a note on the certificate to that effect.
4. Should the device require repair, we will do so where possible, after consultation with the customer.
Norbar is accredited by UKAS for torque measurements between 0.005 N·m and 108,500 N·m or the imperial equivalents. Our Schedule of Accreditation gives further details.
UKAS certificates are issued under the authority of the United Kingdom Accreditation Service.
Accreditation by UKAS means that Norbar’s Laboratory has been assessed against internationally recognised standards to demonstrate its competence, impartiality and performance capability.
1. Should the device be in specification ’As Found’, a certificate will be raised and the device returned.
2. Should the device be out of specification, but capable of adjustment, it will be adjusted, ’As Left’ readings taken, and one certificate raised with ’As Found’ and ’As Left’ readings on it.
3. Should the device not be capable of adjustment, it will be returned, with a note on the certificate to that effect.
4. Should the device require repair, we will do so where possible, after consultation with the customer.
Norbar is accredited by UKAS for torque measurements between 0.005 N·m and 108,500 N·m or the imperial equivalents. Our Schedule of Accreditation gives further details.
UKAS certificates are issued under the authority of the United Kingdom Accreditation Service.
Accreditation by UKAS means that Norbar’s Laboratory has been assessed against internationally recognised standards to demonstrate its competence, impartiality and performance capability.
UKAS Accredited Laboratory
Accredited Calibration Laboratory No. 0256
The hallmark of Norbar’s high standard of workmanship is clearly seen in the fact that we were the first torque equipment manufacturer to have an in-house UKAS accredited calibration laboratory. We have no intention of resting on our laurels, though, and take pride that we still provide the most comprehensive service available, ensuring we evolve to continue to meet your needs.
Norbar’s laboratory has approval for torques between 0.005 N·m and 108,500 N·m. and operates to BS EN ISO/IEC 17025:2005, which sets standards for the technical competence of the laboratory. This should not be confused with laboratories claiming ISO 9001:2008 which relates only to a laboratory's quality management systems.
The hallmark of Norbar’s high standard of workmanship is clearly seen in the fact that we were the first torque equipment manufacturer to have an in-house UKAS accredited calibration laboratory. We have no intention of resting on our laurels, though, and take pride that we still provide the most comprehensive service available, ensuring we evolve to continue to meet your needs.
Norbar’s laboratory has approval for torques between 0.005 N·m and 108,500 N·m. and operates to BS EN ISO/IEC 17025:2005, which sets standards for the technical competence of the laboratory. This should not be confused with laboratories claiming ISO 9001:2008 which relates only to a laboratory's quality management systems.
After Sales Service
Norbar understands that you value us for both the precision of our equipment and the reliability of our service. In the event that you need equipment replacing or repairing we appreciate that time is of the essence, and work to ensure equipment is replaced, repaired and returned to you as quickly as possible, without ever compromising the high standards that you expect from us. Please download the Norbar Goods Return Form, complete and return with your goods.
Service Replacement Policy
Slimline and Professional Models up to a capacity of 400 N·m and Industrial Torque Wrenches sent in for repair will be replaced by a Service Replacement Tool. It is not our policy to repair tools in these ranges.
Professional models with a capacity above 400 N·m will be repaired on a parts plus labour basis unless the service replacement cost would be lower.
New parts are used in the manufacture of service replacement tools and carry a twelve-month part and labour warranty and calibration certificate.
Spares Availability
Norbar offers over 150 different Spares Kits to support the longevity of their tools. In order to maintain the quality, performance, and peace of mind associated with their products Norbar recommend that only genuine Norbar spares are fitted to their tools.
Service Replacement Policy
Slimline and Professional Models up to a capacity of 400 N·m and Industrial Torque Wrenches sent in for repair will be replaced by a Service Replacement Tool. It is not our policy to repair tools in these ranges.
Professional models with a capacity above 400 N·m will be repaired on a parts plus labour basis unless the service replacement cost would be lower.
New parts are used in the manufacture of service replacement tools and carry a twelve-month part and labour warranty and calibration certificate.
Spares Availability
Norbar offers over 150 different Spares Kits to support the longevity of their tools. In order to maintain the quality, performance, and peace of mind associated with their products Norbar recommend that only genuine Norbar spares are fitted to their tools.
Ultrasonic Measurement Devices
Ultrasonic measurement devices are instruments that use high-frequency sound waves (ultrasound) to measure distances, thicknesses, or other physical properties. These devices work by emitting an ultrasonic pulse, which travels through a material, reflects off a surface, and returns to the sensor. The time it takes for the pulse to return is used to calculate the measurement. Ultrasonic measurement technology is widely used across many industries because it offers a fast, reliable, and often non-contact means of measurement, making it a crucial tool for both quality control and process monitoring.
Hydraulic Tool Calibration Fixtures
Hydraulic Tool Calibration Fixtures are specialised tools or setups used to calibrate, test, and verify the performance and accuracy of hydraulic tools and equipment. These fixtures ensure that hydraulic tools (such as hydraulic torque wrenches, jacks, pumps, and testing devices) are operating within specified parameters, allowing for proper maintenance, accuracy, and performance in their intended applications.
EvoTorque 2
The EvoTorque 2 is an advanced, hydraulic-powered torque wrench that combines precision, durability, and safety in a user-friendly design. Its digital controls, wide torque range, and advanced safety features make it ideal for industrial bolting applications where reliability and accuracy are critical. Whether in energy, construction, or manufacturing, the EvoTorque 2 provides a solution that enhances productivity while ensuring that bolted connections are tightened to the exact specifications required.
Electrode Wrenches
Electrode Wrenches are specialised tools designed for the precise tightening and loosening of electrode bolts in welding and cutting equipment, particularly those used in arc welding and electrochemical processes. These wrenches are essential for the maintenance of welding equipment where electrodes are an integral part of the process, ensuring that the connections are secure, and that the tool operates efficiently.
Torque Transducers
Torque Transducers, also known as torque sensors or torque meters, are precision instruments used to measure the torque (rotational force) applied to a rotating object, typically in mechanical systems. These transducers convert the rotational force into an electrical signal, which can then be monitored, recorded, and analyzed. Torque transducers are critical in applications requiring precise control of rotational forces, such as in automotive testing, industrial machinery, robotics, and more.
Battery Torque Tools
Battery Torque Tools are portable, battery-powered tools designed to apply precise torque in a wide range of applications, from assembly and maintenance to manufacturing processes. They combine the convenience of cordless power with the precision of torque control, making them ideal for use in environments where both mobility and accuracy are important. These tools are typically used for tightening fasteners to a specified torque value, ensuring the integrity and safety of bolted connections.
Harsh Environment Annular Transducers
Harsh Environment Annular Transducers are specialised sensors designed to measure torque or rotational force in challenging or extreme conditions, where traditional transducers might not perform effectively. These transducers are typically used in environments that involve high temperatures, extreme pressures, corrosive elements, vibration, or shock loads. The term "annular" refers to the shape or geometry of the sensor, specifically the circular or ring-like structure of the transducer, which is often designed to fit around the rotating or torque-bearing component, such as a shaft.
Reaction Plates
Reaction Plates are devices used in torque measurement systems to provide a stable, fixed point for measuring the rotational force (torque) applied to a rotating component, such as a shaft or motor. They are often part of the setup for torque transducers and torque sensors, particularly in applications where measuring the reaction force is necessary for precise torque determination.
Socket Retainers
Socket Retainers are mechanical components used in various tools and machinery to securely hold sockets or other interchangeable tool attachments in place, preventing them from falling off or disengaging during use. They are commonly used in socket wrenches, impact wrenches, power tools, and other mechanical systems that require the quick interchange of tool heads or components. Socket retainers play an essential role in maintaining tool safety and ensuring the efficiency of operations by keeping the socket properly attached to the drive mechanism.
Torque Wrench Calibrator
A Torque Wrench Calibrator is a specialised tool used to calibrate and verify the accuracy of a torque wrench. It ensures that the torque wrench is providing the correct torque measurement during use, which is critical in many industrial, automotive, aerospace, and manufacturing applications where precise torque control is required for safety, reliability, and performance.
About us
Norbar Torque Tools is a UKAS accredited, successful and well respected name in the field of measurement & control of torque. We have a range of torque tools and gauges for most industrial applications. Our calibration services are provided by our UKAS accredited calibration laboratory. Calibration services are available for torque between 0.05 N.m. and 6800 N.m.
Norbar Torque Tools offer solutions to torquing problems in a diverse range of industrial sectors including Oil &Gas, Aerospace, Mining, Energy (including wind generation), Manufacturing & Assembly, and Transportation (including wheels and tyres). Torque control is a key element of engineering reliability. In addition to torque wrenches, multipliers and transducers (sensors) we also sell complete sets of torque calibration equipment.
The Pneutorque® range of Pneumatic Multipliers offers a winning combination of vibration control and reduced sound pressure levels.
Norbar’s mission is to be the best torque tool company in the world. We aim to be respected, profitable and provide a great place to work. Norbar is a well established international company with UK roots.
In addition to this, most of Norbar's distributors offer repair and recalibration services and several have calibration accreditation by their local standards organisations.
Norbar − providing a global service for torque wrenches, torque multipliers, torque measurement, and torque calibration. The Voice of Torque Control.
UKAS accreditation 0256.
Our Torque product ranges includes;
Torque Screwdrivers − TTs Torque Screwdrivers.
Torque Wrenches − NorTorque, New Professional Wrenches, TT Wrenches, SL0 Wrenches, Industrial Wrenches, Professional 650 − 1500 Series, Professional Model 5, Tethered Torque Wrenches, Non-Magnetic, Electrode Wrenches, End Fittings, Repairs Kits, ‘P’ Type Handle Repair Kits and Torque Wrench Accessories.
Electronic Torque Wrenches − ProTronic, ProTronic Plus, ProTronic Plus Electronic Torque Screwdriver, ProTronic Plus Model 10 & 30 and NorTronic.
Manual Torque Multipliers − HT3, HT4, Compact Series and Standard Series.
Battery Torque Tools − EBT-52, EBT-72, EBT-80, EBT-92 and EBT Accessories.
Pneumatic Torque Tools − PTS Series, PTM Series, PT Standard Series and PneuTorque Accessories.
Electronic Torque Tools − EvoTorque 2 and Electronic Torque Multiplier Accessories.
Reactions & Accessories − Socket Retainers, Reaction Plates and Nose Extensions.
Torque Measurement − Tool Test Rigs, Torque Measurement Instruments, Hydraulic Tool Calibration Fixtures, Torque Transducers, Accessories for Transducers, Loaders and Electronic Ancillaries.
Calibration Equipment − Calibration Beams & Weights Laboratory Accessories.
Harsh Environment Range − Harsh Environment Instrument, Harsh Environment Static Transducers, Harsh Environment Annular Transducers, Harsh Environment TD Leads, TTL-HE Instrument and Transducers Kits, Intervention Tool Verification Kits, Intervention Tool Test Pots and Multipliers for Subsea.
Ultrasonic Bolt Measurement − Ultrasonic Measurement Devices, Ultrasonic Measurement Transducers, Ultrasonic Measurement Cables and Ultrasonic Measurement Ancillaries.
Norbar Torque Tools offer solutions to torquing problems in a diverse range of industrial sectors including Oil &Gas, Aerospace, Mining, Energy (including wind generation), Manufacturing & Assembly, and Transportation (including wheels and tyres). Torque control is a key element of engineering reliability. In addition to torque wrenches, multipliers and transducers (sensors) we also sell complete sets of torque calibration equipment.
The Pneutorque® range of Pneumatic Multipliers offers a winning combination of vibration control and reduced sound pressure levels.
Norbar’s mission is to be the best torque tool company in the world. We aim to be respected, profitable and provide a great place to work. Norbar is a well established international company with UK roots.
In addition to this, most of Norbar's distributors offer repair and recalibration services and several have calibration accreditation by their local standards organisations.
Norbar − providing a global service for torque wrenches, torque multipliers, torque measurement, and torque calibration. The Voice of Torque Control.
UKAS accreditation 0256.
Our Torque product ranges includes;
Torque Screwdrivers − TTs Torque Screwdrivers.
Torque Wrenches − NorTorque, New Professional Wrenches, TT Wrenches, SL0 Wrenches, Industrial Wrenches, Professional 650 − 1500 Series, Professional Model 5, Tethered Torque Wrenches, Non-Magnetic, Electrode Wrenches, End Fittings, Repairs Kits, ‘P’ Type Handle Repair Kits and Torque Wrench Accessories.
Electronic Torque Wrenches − ProTronic, ProTronic Plus, ProTronic Plus Electronic Torque Screwdriver, ProTronic Plus Model 10 & 30 and NorTronic.
Manual Torque Multipliers − HT3, HT4, Compact Series and Standard Series.
Battery Torque Tools − EBT-52, EBT-72, EBT-80, EBT-92 and EBT Accessories.
Pneumatic Torque Tools − PTS Series, PTM Series, PT Standard Series and PneuTorque Accessories.
Electronic Torque Tools − EvoTorque 2 and Electronic Torque Multiplier Accessories.
Reactions & Accessories − Socket Retainers, Reaction Plates and Nose Extensions.
Torque Measurement − Tool Test Rigs, Torque Measurement Instruments, Hydraulic Tool Calibration Fixtures, Torque Transducers, Accessories for Transducers, Loaders and Electronic Ancillaries.
Calibration Equipment − Calibration Beams & Weights Laboratory Accessories.
Harsh Environment Range − Harsh Environment Instrument, Harsh Environment Static Transducers, Harsh Environment Annular Transducers, Harsh Environment TD Leads, TTL-HE Instrument and Transducers Kits, Intervention Tool Verification Kits, Intervention Tool Test Pots and Multipliers for Subsea.
Ultrasonic Bolt Measurement − Ultrasonic Measurement Devices, Ultrasonic Measurement Transducers, Ultrasonic Measurement Cables and Ultrasonic Measurement Ancillaries.
Images
Articles / Press Releases
Brochures
Reviews
Trade Associations
