Non-contact torque sensor now mounts in moments
10 August 2009
The latest model of TorqSense, the non-contact digital torque measuring system from Sensor Technology, incorporates an integral sprocket or pulley, allowing easy fit-and-forget mounting.
Earlier models of TorqSense provided an in-line shaft for connection to the equipment under test. While these are suitable for many situations, sometimes a degree of engineering was necessary to mount the unit. This prompted torque system manufacturers Sensor Technology to develop this new user-friendly series of models.The new RWT 350/360 TorqSense is suitable for virtually any plant driven by a belt or chain drive, particularly those where space is limited or access restricted. The ease of fitting is also likely to be of interest for jobs where it is essential to minimise downtime, such as in continuous process plant.
“Belt and chain drives naturally have a high radial load, which has to be accounted for when mounting a standard TorqSense,” explains Tony Ingham of Sensor Technology. “It’s not rocket science, but it can be fiddly, especially if access is physically difficult or time is limited. The new RWT350/360 simply replaces an existing pulley/sprocket, and can be fitted in minutes and automatically compensates for the radial load. It’s little more than tighten up a few Allen screws and checking alignment.”
To aid mounting in tight spaces, the RWT350/360 has its control electronics separate from the sensing head, similar to the RWT330/340 series introduced by Sensor Technology last year. This means that the head can be located in very small spaces, while the electronics are mounted at a convenient distance via a dedicated cable. This configuration is also useful for situations where electronics may be more environmentally situated elsewhere.
TorqSense uses tiny piezo-ceramic combs, known as Surface Acoustic Wave (SAW) devices fixed to a purpose designed flange. These distort in proportion to the instantaneous torque level. The distortion creates RF data signals that are transmitted via a non-contact radio frequency coupling rather than by conventional but clumsy slip rings, or high inertia rotary transformers. This data signal in turn is transmitted to the control unit, from which it can be read on an alpha-numeric display or transferred to a PC for storage and analysis using the TorqView software programme.
“Our larger sensors are used in many applications at the heavy duty end of industry, whereas our smaller ones are found in applications such as fine chemical dosing and lab-based research,” says Tony. “Right through this spectrum are applications where mounting is associated with a belt or chain drive. and the new RWT350/360 makes this a simple plug-and-play operation. It’s an issue that we have become more aware of as the popularity of TorqSense has grown. Our growing band of TorqSense users love the reliability of collecting high speed real-time digital torque data and TorqView’s instant display and analysis makes it a less onerous task, plus we can now say that fitting is also a pleasure.”
Other Press Releases By This Company
- 11/03/2019 - Sensor Technology keeps hydraulic projects on course
- 14/01/2019 - Mass market electric vehicles getting revved up for launch
- 15/11/2018 - Measuring torque without slip rings
- 16/07/2018 - Pay as you sense
- 08/06/2018 - Long service motors tested after re-engineering
- 05/04/2018 - Optical rotary torque sensors suitable for low torque and high band width measurements
- 20/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 20/02/2018 - Electric vehicle pioneer favours wireless test rigs
- 05/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 14/12/2017 - Chemical engineers talk sense about mixer efficiencies
- 14/11/2017 - Sensor Technology keeps hydraulic projects on course
- 14/09/2017 - Electric vehicle pioneer favours wireless test rigs
- 21/06/2017 - Torque test ensures reliability of steerable drills
- 10/06/2013 - Torque Sensor guarntees Tip Top-Taps!
- 30/08/2012 - Automotive Innovations Torque Up Manufacturing Revival
- 31/07/2012 - Torque of a Motor Revolution
- 12/06/2012 - Torque test ensures reliability of steerable drills
- 30/04/2012 - Engineers Torque Technology To Medics
- 29/03/2012 - Long Service Motors Tested after Re-Engineering
- 01/02/2012 - Back Manufacturing, But That Is Only Half The Story
- 23/12/2011 - Pay as you Sense
- 02/11/2011 - New wave and tidal turbine concept promises clean, affordable energy
- 05/10/2011 - Ground Crews talk sense on Generator Maintenance
- 08/09/2011 - TorqSense transducers help to guarantee valve actuator performance
- 08/08/2011 - Company Profile
- 11/05/2011 - Sensing growth opportunities
- 25/03/2011 - Drama as Helicopter sensor flies into Theatre role
- 07/02/2011 - Technology transfer tests tree safety
- 18/01/2011 - Sensor Technology helps to keep sheep shorn
- 02/12/2010 - Smart Load Sensor
- 13/10/2010 - Novel sensors aid tidal turbine development
- 01/09/2010 - Torque Sensor helps reduce engine friction
- 12/08/2010 - Tidal Turbine to light the Thames
- 22/06/2010 - Sensor Technology Provides the Key to Learning
- 05/05/2010 - Talking Sense About Technology Transfer
- 16/04/2010 - ULTRASOUND HELPS OPTIMISE DRIVE DESIGNS
- 08/03/2010 - Ensuring accurate feel to Power Steering
- 12/01/2010 - Iron Bird with lightest touch
- 16/10/2009 - Sensor hones in on sharp operators
- 03/09/2009 - Testing time for business Jet
- 09/06/2009 - SAWs: A Cutting edge technology from Sensor Technology
- 23/01/2009 - Torque improvement for handling accuracy
- 03/11/2008 - Servo research points the way to improved dynamics
- 29/08/2008 - Sensor Technologys' TorqSense shows it's safer to belt up than previously thought
- 30/07/2008 - Nuclear engineers avoid contact with Sensor Technology
- 27/05/2008 - The Future of Green Cars lies in Sophisticated Testing
- 11/03/2008 - When two is better than one
- 19/12/2007 - Regen Drive turns laundry green
- 19/10/2007 - BIG PUSH TO RECYCLE PLASTIC
- 12/09/2007 - Intelligent Extruder plans its' own growth
- 10/08/2007 - UAV takes fast track to altitude