Technology transfer tests tree safety
07 February 2011
Highway engineers and horticulturalists have adapted the latest in helicopter technology to solve a critical safety problem in their own industries, tree viability.
Trees can transform a roadside verge, townscape or recreation space with their beauty and their ability to capture carbon dioxide. But they also present a potential hazard: if they fall, they could block a vital highway or even kill someone. As a result, professionals responsible for trees like to test the strength of their roots, usually by fixing a sling around the trunk and giving it a good tug with a tractor! “This procedure lacks some finesse,” says Tony Ingham of Sensor Technology, who has been working on ways to improve the technique. “The basic idea is to put a strain gauge in line with the sling, then convert the readout from Newtons to a wind speed equivalent.This is perfectly achievable, but the concept needs refining to make it attractive enough to become widely adopted.” The tractor crews will not want to spend time setting up instruments, taking readings, recording them and then set about making complex calculations. If they can’t rope up a tree, give it a pull and move onto the next one in a matter of minutes, they won’t be interested.
Sensor Technology realised that they had the solution to this with their LoadSense range. Tony Ingham continues: “This is actually an intelligent cargo hook for helicopter pilots who need to underslung carry loads. This may seem like a different world, but the concept is that the hook has on-board electronics for measuring the load and a wireless transmitter for sending the live data to a nearby ruggedised PC or custom built handheld readout.
We replaced the hook with one more suited to the tree work, recalibrated the strain gauge and wrote some software appropriate to the job in hand. The procedure with our equipment is to pull the tree until the first suggestions of movement, with the load force being automatically displayed as wind speed and a pass/fail signal.” In the second stage of calculation, the software can use a look-up table to suggest how often such as wind is likely to be experienced.
Tony says that for a future development Sensor Technology is talking to the Met Office about using their wind maps of the UK along with GPS (global positioning system) readings to produce results almost to the individual tree: “All the data handling and calculations are transparent to the crew, they get simple pass/fail reading. But the data can be stored and further resolved into high level management information which will help with developing long-term maintenance programmes.”
Other Press Releases By This Company
- 11/03/2019 - Sensor Technology keeps hydraulic projects on course
- 14/01/2019 - Mass market electric vehicles getting revved up for launch
- 15/11/2018 - Measuring torque without slip rings
- 16/07/2018 - Pay as you sense
- 08/06/2018 - Long service motors tested after re-engineering
- 05/04/2018 - Optical rotary torque sensors suitable for low torque and high band width measurements
- 20/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 20/02/2018 - Electric vehicle pioneer favours wireless test rigs
- 05/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 14/12/2017 - Chemical engineers talk sense about mixer efficiencies
- 14/11/2017 - Sensor Technology keeps hydraulic projects on course
- 14/09/2017 - Electric vehicle pioneer favours wireless test rigs
- 21/06/2017 - Torque test ensures reliability of steerable drills
- 10/06/2013 - Torque Sensor guarntees Tip Top-Taps!
- 30/08/2012 - Automotive Innovations Torque Up Manufacturing Revival
- 31/07/2012 - Torque of a Motor Revolution
- 12/06/2012 - Torque test ensures reliability of steerable drills
- 30/04/2012 - Engineers Torque Technology To Medics
- 29/03/2012 - Long Service Motors Tested after Re-Engineering
- 01/02/2012 - Back Manufacturing, But That Is Only Half The Story
- 23/12/2011 - Pay as you Sense
- 02/11/2011 - New wave and tidal turbine concept promises clean, affordable energy
- 05/10/2011 - Ground Crews talk sense on Generator Maintenance
- 08/09/2011 - TorqSense transducers help to guarantee valve actuator performance
- 08/08/2011 - Company Profile
- 11/05/2011 - Sensing growth opportunities
- 25/03/2011 - Drama as Helicopter sensor flies into Theatre role
- 18/01/2011 - Sensor Technology helps to keep sheep shorn
- 02/12/2010 - Smart Load Sensor
- 13/10/2010 - Novel sensors aid tidal turbine development
- 01/09/2010 - Torque Sensor helps reduce engine friction
- 12/08/2010 - Tidal Turbine to light the Thames
- 22/06/2010 - Sensor Technology Provides the Key to Learning
- 05/05/2010 - Talking Sense About Technology Transfer
- 16/04/2010 - ULTRASOUND HELPS OPTIMISE DRIVE DESIGNS
- 08/03/2010 - Ensuring accurate feel to Power Steering
- 12/01/2010 - Iron Bird with lightest touch
- 16/10/2009 - Sensor hones in on sharp operators
- 03/09/2009 - Testing time for business Jet
- 10/08/2009 - Non-contact torque sensor now mounts in moments
- 09/06/2009 - SAWs: A Cutting edge technology from Sensor Technology
- 23/01/2009 - Torque improvement for handling accuracy
- 03/11/2008 - Servo research points the way to improved dynamics
- 29/08/2008 - Sensor Technologys' TorqSense shows it's safer to belt up than previously thought
- 30/07/2008 - Nuclear engineers avoid contact with Sensor Technology
- 27/05/2008 - The Future of Green Cars lies in Sophisticated Testing
- 11/03/2008 - When two is better than one
- 19/12/2007 - Regen Drive turns laundry green
- 19/10/2007 - BIG PUSH TO RECYCLE PLASTIC
- 12/09/2007 - Intelligent Extruder plans its' own growth
- 10/08/2007 - UAV takes fast track to altitude
