UAV takes fast track to altitude
10 August 2007
Development of a vertical take-off and landing unmanned aerial vehicle is nearing completion, thanks in part to a non-contact digital torque sensor, TorqSense.
The low-cost, flexible search and surveillance unmanned aerial vehicle (UAV) is intended for military, homeland security, policing and environmental monitoring. It is rugged, immediately deployable and can be launched from the ground, ship or even moving vehicles.
The vectored-thrust UAV platform is suitable for any situation requiring safe aerial viewing or sensor measurement. It is being developed by SELEX Sensors and Airborne Systems (S&AS), a Finmeccanica company. "The TorqSense technology has been one of the key enablers for the development and implementation of the novel propulsion system on the Damselfy UAV" said Mark Agnew, Selexs Chief Engineer for UAV Systems.
Leading the project is Ashley Bryant, who started out wanting to build a flyable scale-model replica of the vertical take off Harrier jump jet, but quickly saw the potential for a professional UAV. Using a jet engine was out of the question, a ‘cold fan’ solution the only practical option. "A jet engine combusts fuel to turn its turbine and create thrust," he explains. "Our cold fan is driven, via a drive shaft, by a miniscule but powerful two-stroke engine. Developing this technology required us to build a unique test rig, with an in-line torque sensor so that there were no out of balance forces coming into play."
A thorough review of available sensors showed that only the TorqSense system from Sensor Technology met all his needs. Other requirements included ease of mounting, so that the drive system could be taken on and off the rig frequently, and a need to interface with a PC so that real time performance data could be logged and analysed. TorqSense met the requirements.
Its digital measurement system uses two tiny ceramic piezoelectric quartz combs, resonating at fixed frequencies and fixed to its shaft. As the shaft rotates and torque is applied the combs distort and the resonant frequencies change proportionally to the applied torque. The frequency changes are digitally monitored by the TorqSense electronics in a non-contact manner using a RF couple and a variety of outputs are available. "Our development programme was speeded up because of the ease with which we could lift the drive on and off the test rig, and the fact that we could automate the data capture and analysis,” says Ashley. “If it weren’t for TorqSense we could not have kept to our development schedule, and would have suffered consequential budget stresses too."
In fact Ashley has been so impressed with TorqSense that he is considering adapting it to become a permanent feature of the UAV. "We would use the quartz combs in the usual way, but would integrate the electronic functions with the existing on-board controllers, so the weight gain would be tiny. We would then be able to monitor the drive conditions in flight through our existing remote control system, improving reliability and controllability."
Other Press Releases By This Company
- 11/03/2019 - Sensor Technology keeps hydraulic projects on course
- 14/01/2019 - Mass market electric vehicles getting revved up for launch
- 15/11/2018 - Measuring torque without slip rings
- 16/07/2018 - Pay as you sense
- 08/06/2018 - Long service motors tested after re-engineering
- 05/04/2018 - Optical rotary torque sensors suitable for low torque and high band width measurements
- 20/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 20/02/2018 - Electric vehicle pioneer favours wireless test rigs
- 05/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 14/12/2017 - Chemical engineers talk sense about mixer efficiencies
- 14/11/2017 - Sensor Technology keeps hydraulic projects on course
- 14/09/2017 - Electric vehicle pioneer favours wireless test rigs
- 21/06/2017 - Torque test ensures reliability of steerable drills
- 10/06/2013 - Torque Sensor guarntees Tip Top-Taps!
- 30/08/2012 - Automotive Innovations Torque Up Manufacturing Revival
- 31/07/2012 - Torque of a Motor Revolution
- 12/06/2012 - Torque test ensures reliability of steerable drills
- 30/04/2012 - Engineers Torque Technology To Medics
- 29/03/2012 - Long Service Motors Tested after Re-Engineering
- 01/02/2012 - Back Manufacturing, But That Is Only Half The Story
- 23/12/2011 - Pay as you Sense
- 02/11/2011 - New wave and tidal turbine concept promises clean, affordable energy
- 05/10/2011 - Ground Crews talk sense on Generator Maintenance
- 08/09/2011 - TorqSense transducers help to guarantee valve actuator performance
- 08/08/2011 - Company Profile
- 11/05/2011 - Sensing growth opportunities
- 25/03/2011 - Drama as Helicopter sensor flies into Theatre role
- 07/02/2011 - Technology transfer tests tree safety
- 18/01/2011 - Sensor Technology helps to keep sheep shorn
- 02/12/2010 - Smart Load Sensor
- 13/10/2010 - Novel sensors aid tidal turbine development
- 01/09/2010 - Torque Sensor helps reduce engine friction
- 12/08/2010 - Tidal Turbine to light the Thames
- 22/06/2010 - Sensor Technology Provides the Key to Learning
- 05/05/2010 - Talking Sense About Technology Transfer
- 16/04/2010 - ULTRASOUND HELPS OPTIMISE DRIVE DESIGNS
- 08/03/2010 - Ensuring accurate feel to Power Steering
- 12/01/2010 - Iron Bird with lightest touch
- 16/10/2009 - Sensor hones in on sharp operators
- 03/09/2009 - Testing time for business Jet
- 10/08/2009 - Non-contact torque sensor now mounts in moments
- 09/06/2009 - SAWs: A Cutting edge technology from Sensor Technology
- 23/01/2009 - Torque improvement for handling accuracy
- 03/11/2008 - Servo research points the way to improved dynamics
- 29/08/2008 - Sensor Technologys' TorqSense shows it's safer to belt up than previously thought
- 30/07/2008 - Nuclear engineers avoid contact with Sensor Technology
- 27/05/2008 - The Future of Green Cars lies in Sophisticated Testing
- 11/03/2008 - When two is better than one
- 19/12/2007 - Regen Drive turns laundry green
- 19/10/2007 - BIG PUSH TO RECYCLE PLASTIC
- 12/09/2007 - Intelligent Extruder plans its' own growth
