Iron Bird with lightest touch
12 January 2010
A non-contact torque transducer is helping British Aerospace Systems stay on schedule for the delivery of the new Nimrod aircraft to the Ministry of Defence.
Instead of using a complicated and delicate set of slip rings, the TorqSense transducer, developed by Sensor Technology in Banbury, uses a RF (radio frequency) link to constantly monitor the torque in a shaft under test.The new Nimrod MRA4 is a highly capable maritime reconnaissance and attack aircraft that can be configured for multiple roles including anti-submarine warfare, anti-surface unit warfare and search and rescue. It was due in service as of 2009 and will replace the high regarded Nimrod MR2 which has served the navy and the military well for four decades.
The first Nimrod MRA4 made its maiden flight late last year and the project is now moving into a pre-delivery development phase, during which its Iron Bird test rig will be used virtually around the clock to prove the designs of many of the critical subsystems of the aircraft. The Iron Bird rig is the primary test tool for the integration and endurance testing of the Nimrod MRA4 Mechanical systems.
Utilising a reclaimed Nimrod MR2 fuselage as a base, the Landing Gear, Hydraulic system (including actual Engine Driven Pumps), Primary and secondary flight controls are mounted in their correct positions to their correct interfaces. Flight forces on the surfaces, landing gear etc, are simulated by a sophisticated electro-mechanical system attached to the moving elements of the aircraft. Test data is gathered through a variety of sensors, which have to have as little effect on the system under test as possible.
TorqSense, being non-contact, causes no drag whatsoever, so there is no need to allow for a constant offset when analysing data from the Iron Bird. TorqSense is used in conjunction with two tiny ceramic piezoelectric combs glued onto the surface of the shaft under test. As the torque increases the combs open up, changing their electrical resistance proportionally to the change in frequency of the Surface Acoustic Waves (SAWs) caused by the rotating shaft.
In effect the combs are frequency dependent strain gauges that measure changes in resonant frequency of the test shaft as the test programme is run. A wireless radio frequency coupling is used to transfer the data signal to a pick-up head. The same coupling is used to supply power to the strain gauges, possible because the gauges are based on piezo technology so need less than one milliwatt of power. This arrangement does away completely with the difficulties of fitting slip rings and maintaining their contact quality throughout an extended test run.
TorqSense embraces all the advantages of SAW technology, including no load imparted to the drive mechanism under investigation, a broader signal bandwidth than other analogue based technologies and elimination of electromagnetic interference. In service the Nimrod MRA4 will have a crew of about 10 and have a range of about 6000 miles, allowing to fly to say Buenos Aires non-stop or to stay on station twice as long as its predecessor during a search and rescue mission.
It will be powered by four Rolls-Royce BR710 engines, so will have a high level top speed of 600 miles an hour yet is whisper quiet during low level activities. Described as a technological step change from the MR2, it will bristle with new electronics technology, much of it highly classified.
Other Press Releases By This Company
- 11/03/2019 - Sensor Technology keeps hydraulic projects on course
- 14/01/2019 - Mass market electric vehicles getting revved up for launch
- 15/11/2018 - Measuring torque without slip rings
- 16/07/2018 - Pay as you sense
- 08/06/2018 - Long service motors tested after re-engineering
- 05/04/2018 - Optical rotary torque sensors suitable for low torque and high band width measurements
- 20/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 20/02/2018 - Electric vehicle pioneer favours wireless test rigs
- 05/02/2018 - Pump and valve innovator finds a test rig technology that talks the torque
- 14/12/2017 - Chemical engineers talk sense about mixer efficiencies
- 14/11/2017 - Sensor Technology keeps hydraulic projects on course
- 14/09/2017 - Electric vehicle pioneer favours wireless test rigs
- 21/06/2017 - Torque test ensures reliability of steerable drills
- 10/06/2013 - Torque Sensor guarntees Tip Top-Taps!
- 30/08/2012 - Automotive Innovations Torque Up Manufacturing Revival
- 31/07/2012 - Torque of a Motor Revolution
- 12/06/2012 - Torque test ensures reliability of steerable drills
- 30/04/2012 - Engineers Torque Technology To Medics
- 29/03/2012 - Long Service Motors Tested after Re-Engineering
- 01/02/2012 - Back Manufacturing, But That Is Only Half The Story
- 23/12/2011 - Pay as you Sense
- 02/11/2011 - New wave and tidal turbine concept promises clean, affordable energy
- 05/10/2011 - Ground Crews talk sense on Generator Maintenance
- 08/09/2011 - TorqSense transducers help to guarantee valve actuator performance
- 08/08/2011 - Company Profile
- 11/05/2011 - Sensing growth opportunities
- 25/03/2011 - Drama as Helicopter sensor flies into Theatre role
- 07/02/2011 - Technology transfer tests tree safety
- 18/01/2011 - Sensor Technology helps to keep sheep shorn
- 02/12/2010 - Smart Load Sensor
- 13/10/2010 - Novel sensors aid tidal turbine development
- 01/09/2010 - Torque Sensor helps reduce engine friction
- 12/08/2010 - Tidal Turbine to light the Thames
- 22/06/2010 - Sensor Technology Provides the Key to Learning
- 05/05/2010 - Talking Sense About Technology Transfer
- 16/04/2010 - ULTRASOUND HELPS OPTIMISE DRIVE DESIGNS
- 08/03/2010 - Ensuring accurate feel to Power Steering
- 16/10/2009 - Sensor hones in on sharp operators
- 03/09/2009 - Testing time for business Jet
- 10/08/2009 - Non-contact torque sensor now mounts in moments
- 09/06/2009 - SAWs: A Cutting edge technology from Sensor Technology
- 23/01/2009 - Torque improvement for handling accuracy
- 03/11/2008 - Servo research points the way to improved dynamics
- 29/08/2008 - Sensor Technologys' TorqSense shows it's safer to belt up than previously thought
- 30/07/2008 - Nuclear engineers avoid contact with Sensor Technology
- 27/05/2008 - The Future of Green Cars lies in Sophisticated Testing
- 11/03/2008 - When two is better than one
- 19/12/2007 - Regen Drive turns laundry green
- 19/10/2007 - BIG PUSH TO RECYCLE PLASTIC
- 12/09/2007 - Intelligent Extruder plans its' own growth
- 10/08/2007 - UAV takes fast track to altitude