Company details for:
CPC UK
(0)
Unit 3,
Beta Way,
Thorpe Industrial Estate,
Egham,
Surrey,
TW20 8RE,
United Kingdom
Quick Links:
Products
IR-em2 - Infrared Aspirated Environmental Monitor
The IR-em2 offers intelligent, reliable and accurate gas monitoring for a wide range of HCFC and HFC refrigerants together with Carbon Dioxide and Ammonia.
Exclusive to the IR-em2 is the ability to monitor each zone individually for specific refrigerants therefore enabling HFC's/CO2 or ammonia/CO2 to be sampled on subsequent channels from a common IR-em2. Its high sensitivity and selectivity ensures gas leaks are detected at the earliest opportunity, therefore reducing unnecessary losses.
Common leak, spill and fault relays together with 16 individual zone relays enable easy integration of the IR-em2 into alarm and emergency ventilation systems.
Exclusive to the IR-em2 is the ability to monitor each zone individually for specific refrigerants therefore enabling HFC's/CO2 or ammonia/CO2 to be sampled on subsequent channels from a common IR-em2. Its high sensitivity and selectivity ensures gas leaks are detected at the earliest opportunity, therefore reducing unnecessary losses.
Common leak, spill and fault relays together with 16 individual zone relays enable easy integration of the IR-em2 into alarm and emergency ventilation systems.
MP-em - Multi Point Environmental Monitor
The MP-em offers the ideal solution for multi-point monitoring for a wide range of toxic and explosive gases. As well as HCFC, HC and HFC refrigerants, Ammonia and Carbon dioxide which are encountered in the refrigeration industry other gases such as Carbon monoxide, Ethanol, Hydrogen, Natural gas, Propane and Butane can be detected.
This is a cost effective solution for multi-point monitoring of a wide range of gases and refrigerants using remotely hard wired sensors. Four and six point models are available with the ability to detect a different gas on each channel, if required.
The unit is ideally suited to small/medium sized applications where the presence of contaminant gases can be either detrimental to health, evironment or potentially explosive. Each sensor is wired back to the microprocessor based controller which provides independent status indication and alarm configuration.
This is a cost effective solution for multi-point monitoring of a wide range of gases and refrigerants using remotely hard wired sensors. Four and six point models are available with the ability to detect a different gas on each channel, if required.
The unit is ideally suited to small/medium sized applications where the presence of contaminant gases can be either detrimental to health, evironment or potentially explosive. Each sensor is wired back to the microprocessor based controller which provides independent status indication and alarm configuration.
SP-em - Single Point Environmental Monitor
The SP-em offers a range of microprocessor based detectors for single point gas monitoring. As standard, the monitoring unit comes with an internal sensor, although a range of remote sensors is also available. Typical gases monitored include HCFC, HC and HFC refrigerants, Ammonia, Carbon dioxide, Carbon monoxide, Ethanol, Hydrogen, Natural gases, Propane and Butane.
The SP-em range is a cost effective way of monitoring a single zone for gas leaks. Each SP-em unit can be configured with up to 3 alarm thresholds and features 3 corresponding SPDT relays. High intensity LED indicators provide status indication of leaks in addition to a sensor fault. The standard carbon dioxide monitoring unit will operate down to 0°C, although the low temperature model with internal heater element allows accurate detection down to environments at -30°C.
The integral units are available in IP21 and IP54 enclosures (or IP56 enclosure for the CO2 model). Remote sensor options allow the display to be located outside of the monitored space for ease of visibility. Remote sensor options include IP21 & IP54 enclosures (or IP56 enclosure for the CO2 model) together with options for monitoring pressure relief vent lines and ATEX approved housings for potentially explosive and classified zones.
The SP-em range is a cost effective way of monitoring a single zone for gas leaks. Each SP-em unit can be configured with up to 3 alarm thresholds and features 3 corresponding SPDT relays. High intensity LED indicators provide status indication of leaks in addition to a sensor fault. The standard carbon dioxide monitoring unit will operate down to 0°C, although the low temperature model with internal heater element allows accurate detection down to environments at -30°C.
The integral units are available in IP21 and IP54 enclosures (or IP56 enclosure for the CO2 model). Remote sensor options allow the display to be located outside of the monitored space for ease of visibility. Remote sensor options include IP21 & IP54 enclosures (or IP56 enclosure for the CO2 model) together with options for monitoring pressure relief vent lines and ATEX approved housings for potentially explosive and classified zones.
SP-ir - Single Point Environmental Monitor
The SP-ir provides single point gas detection using non dispersive Infrared advanced technology for HFC, HFO and CO2 refrigerants. Until now most IR based refrigerant leak detection systems have been aspirated like our IR-em2, which are more suited to medium and large installations. An SP-ir offers the accuracy and selectivity of IR technology in an easy to install single point diffusion detector.
Each detector is supplied in an IP65 rated polycarbonate encloure with high intensity LED’s to confirm operational and alarm status. Available to operate from either a 24 volt AC or 230 volt AC supply the SP-ir is supplied fully configured and ready to monitor your refrigeration system. 4 fixing screws and a power supply are required and 60 seconds later the warm-up is completed and the SP-ir is ready to detect leaking refrigerant.
Cross sensitivity and poor accuracy often associated with other technologies are overcome with the SP-ir detector to enable users to set low alarm thresholds with confidence. Fitted with an integral audible alarm and volt free alarm relays the detector can either be used as a standalone device or connected to a management system via the RS485 network interface. If an analogue output is required to monitor the gas concentration the options are 0 to 10 volt and 0 to 20mA. Each leak detector is supplied fully configured to suit the target refrigerant with the ability to operate at ambient conditions between -40°C and 40°C without loss of performance.
Each detector is supplied in an IP65 rated polycarbonate encloure with high intensity LED’s to confirm operational and alarm status. Available to operate from either a 24 volt AC or 230 volt AC supply the SP-ir is supplied fully configured and ready to monitor your refrigeration system. 4 fixing screws and a power supply are required and 60 seconds later the warm-up is completed and the SP-ir is ready to detect leaking refrigerant.
Cross sensitivity and poor accuracy often associated with other technologies are overcome with the SP-ir detector to enable users to set low alarm thresholds with confidence. Fitted with an integral audible alarm and volt free alarm relays the detector can either be used as a standalone device or connected to a management system via the RS485 network interface. If an analogue output is required to monitor the gas concentration the options are 0 to 10 volt and 0 to 20mA. Each leak detector is supplied fully configured to suit the target refrigerant with the ability to operate at ambient conditions between -40°C and 40°C without loss of performance.
RD-em - Refrigerant Leak Detector
The RD-em provides a discreet and stylish product ideally suited to identification of refrigerant leaks in hotel rooms, offices and residential properties.
The RD-em sits inside a flush mount electrical back box with a range of cover plates to compliment the electrical switches and sockets fitted in the room. Each microprocessor controlled RD-em is provided fully configured ready to monitor the environment for refrigerant leaks before health and safety limits are exceeded.
A unique feature of the RD-em is its dual alarm operation which enables it to fulfil the requirements of EN378:2008 and the long term exposure limits outlined in the COSSH data sheets for refrigerant 410a, which is typically employed in modern air-conditioning applications. For safety purposes the alarm relay in the RD-em is energised during normal operation and de-energised in the event of a fault or alarm to provide a fail-safe feature.
The RD-em sits inside a flush mount electrical back box with a range of cover plates to compliment the electrical switches and sockets fitted in the room. Each microprocessor controlled RD-em is provided fully configured ready to monitor the environment for refrigerant leaks before health and safety limits are exceeded.
A unique feature of the RD-em is its dual alarm operation which enables it to fulfil the requirements of EN378:2008 and the long term exposure limits outlined in the COSSH data sheets for refrigerant 410a, which is typically employed in modern air-conditioning applications. For safety purposes the alarm relay in the RD-em is energised during normal operation and de-energised in the event of a fault or alarm to provide a fail-safe feature.
E2 - Refrigeration Control, Monitoring & System Management
The E2 refrigeration control & temperature monitoring system is a versatile platform for a modular system able to offer monitoring and/or control for refrigeration applications.
A QWERTY keyboard and backlit LCD screen enables users to easily navigate though the status, alarm, logs and configuration pages.
In the simplest form the E2 can be the heart of a temperature and condition monitoring system with extensive alarm and logging features.
A QWERTY keyboard and backlit LCD screen enables users to easily navigate though the status, alarm, logs and configuration pages.
In the simplest form the E2 can be the heart of a temperature and condition monitoring system with extensive alarm and logging features.
Imec - Analogue & Digital Input Monitoring
Digital and Analogue alarm monitoring with easy to view display and ethernet interface.
The Imec is a simple and effective monitoring device for up to 32 digital inputs and 3 analogue inputs with an ethernet interface which can be remotely viewed from a web browser.
The display provides clear visual indication of the status of each digital input from the red/green high intensity LED's and can be either surface or flush mounted.
The 3 analogue inputs can be individually configured with individual alarm thresholds and time delays. Unused channels can be switched off.
The Imec is a simple and effective monitoring device for up to 32 digital inputs and 3 analogue inputs with an ethernet interface which can be remotely viewed from a web browser.
The display provides clear visual indication of the status of each digital input from the red/green high intensity LED's and can be either surface or flush mounted.
The 3 analogue inputs can be individually configured with individual alarm thresholds and time delays. Unused channels can be switched off.
IMEC-RAD - Simple Gas Leak Alarm Monitoring
The IMEC-RAD provides alarm monitoring and power for multiple refrigerant leak detectors together with an easy to view display and Ethernet interface for remote monitoing.
The IMEC−RAD is a simple and effective monitoring device for up to 32 or 64 remote refrigerant gas leak detectors. The IMEC-RAD provides a 24 volt AC supply to each RD-em refrigerant leak detector and monitors their alarm status. An Ethernet interface provides access to view and configure the IMEC-RAD using a web browser. The front fascia can be customised to provide site specific infor-mation to suit the application.
The display fascia provides clear visual indication of the alarm status of each remote gas leak detector from the red/green high intensity LED’s with unused channels being switched off. A green LED indi-cates a healthy status, red LED indicates an alarm condition and a flashing red LED signifies a latched alarm which has returned to its normal condition. Depressing the reset button inside the enclosure will return the alarm to its normal condition.
The IMEC−RAD is a simple and effective monitoring device for up to 32 or 64 remote refrigerant gas leak detectors. The IMEC-RAD provides a 24 volt AC supply to each RD-em refrigerant leak detector and monitors their alarm status. An Ethernet interface provides access to view and configure the IMEC-RAD using a web browser. The front fascia can be customised to provide site specific infor-mation to suit the application.
The display fascia provides clear visual indication of the alarm status of each remote gas leak detector from the red/green high intensity LED’s with unused channels being switched off. A green LED indi-cates a healthy status, red LED indicates an alarm condition and a flashing red LED signifies a latched alarm which has returned to its normal condition. Depressing the reset button inside the enclosure will return the alarm to its normal condition.
IMEC-M - Refrigerant Leak Alarm Monitoring
The IMEC-M provides an easy to use alarm and status display for up to 256 RD-em refrigerant leak detectors and is typically used in hotel and large office installations.
In the event of a refrigerant leak an audible alarm and red LED will prompt staff to view the backlit LCD screen, which will provide details of the room in fault/alarm, so further action can be taken. An Ethernet port also enables the status and configuration to be viewed remotely via a web browser.
The IMEC-M operates in conjunction wi.th up to 8 x 32 channel IMEC -Smart's which provide power and monitor the volt free alarm contacts within the RD-em refrigerant leak detector. A network cable communicates alarm and status details of each refrigerant leak detector from the IMEC-Smart monitoring panel to the IMEC-M.
In the event of a refrigerant leak an audible alarm and red LED will prompt staff to view the backlit LCD screen, which will provide details of the room in fault/alarm, so further action can be taken. An Ethernet port also enables the status and configuration to be viewed remotely via a web browser.
The IMEC-M operates in conjunction wi.th up to 8 x 32 channel IMEC -Smart's which provide power and monitor the volt free alarm contacts within the RD-em refrigerant leak detector. A network cable communicates alarm and status details of each refrigerant leak detector from the IMEC-Smart monitoring panel to the IMEC-M.
Gas-Mate - Combustible Gas Leak Detector
GAS-Mate is perfect for pinpointing leaks in residential and commercial combustion appliances as well as Industrial Refrigeration equipment.
The Gas Mate can detect a range of combustible gases which includes natural gas, propane, butane, ammonia and all hydrocarbon based refrigerants such as R290, R1270, R600 etc.
GAS-Mate uses leading edge technology to detect hydrocarbons and other gases with twice the sensitivity of competing models. GAS-Mate is a precision Instrument of rugged construction and is supplied in a high-impact case.
The Gas Mate can detect a range of combustible gases which includes natural gas, propane, butane, ammonia and all hydrocarbon based refrigerants such as R290, R1270, R600 etc.
GAS-Mate uses leading edge technology to detect hydrocarbons and other gases with twice the sensitivity of competing models. GAS-Mate is a precision Instrument of rugged construction and is supplied in a high-impact case.
Tek-Mate - Portable Low Cost Leak Detector
A portable low cost hand detector of CFCs, HCFCs and HFCs with an automatic background contamination compensator. The TEK-Mate is efficient and reliable in finding leaks even in harsh and damp conditions.
The TEK-Mate uses a high / low sensitivity switch, variable intensity audible alarm and a variable frequency flashing LED to assist the user in pin pointing leaks.
The lightweight, simple operation and long lasting performance on two D-size batteries have helped make the TEK-Mate a favourite amongst portable detectors.
The TEK-Mate uses a high / low sensitivity switch, variable intensity audible alarm and a variable frequency flashing LED to assist the user in pin pointing leaks.
The lightweight, simple operation and long lasting performance on two D-size batteries have helped make the TEK-Mate a favourite amongst portable detectors.
D-Tek Select - Refrigerant Leak Detector
As the first accurate, reliable, highly sensitive, cordless refrigerant leak detector, the original D-TEK revolutionised the field. Now we have built on that technology leadership to create the D-TEK Select.
This next-generation of refrigerant leak detector uses an innovative infrared absorption sensing cell that is extremely sensitive to all HFC and HCFC refrigerants and even the new generation HFO's such as R1234YF.
D-TEK Select maintains that sensitivity over time for consistent, accurate and reliable performance, even with the newer refrigerant blends. Best of all, the sensing cell lasts for approximately 1000 hours - almost 10 times longer than the original D-TEK sensor - to lower your cost of ownership and improve job site productivity.
This next-generation of refrigerant leak detector uses an innovative infrared absorption sensing cell that is extremely sensitive to all HFC and HCFC refrigerants and even the new generation HFO's such as R1234YF.
D-TEK Select maintains that sensitivity over time for consistent, accurate and reliable performance, even with the newer refrigerant blends. Best of all, the sensing cell lasts for approximately 1000 hours - almost 10 times longer than the original D-TEK sensor - to lower your cost of ownership and improve job site productivity.
D-Tek CO2 - CO2 Refrigerant Leak Detector
A handheld detector to provide consistent, reliable & accurate detection of CO2. The D-TEK CO2, is a hand-held refrigerant leak detector designed especially to pinpoint the source of the leak.
The D-TEK CO2 uses an innovative infrared absorption sensing cell which is extremely selective to carbon dioxide, yet it's circuitry allows the instrument to equalize to the CO2 present in the atmosphere, so there is minimal risk of false alarms.
D-TEK CO2 maintains its sensitivity over time for consistent, accurate and reliable performance. It's specialized infrared sensor cell lasts for approximately 1000 hours, so you buy fewer replacement parts. Additional features include a charging status indicator, sensor failure indication, sensor test mode and rechargeable NiMH (nickel metal hydride) batteries.
The D-TEK CO2 uses an innovative infrared absorption sensing cell which is extremely selective to carbon dioxide, yet it's circuitry allows the instrument to equalize to the CO2 present in the atmosphere, so there is minimal risk of false alarms.
D-TEK CO2 maintains its sensitivity over time for consistent, accurate and reliable performance. It's specialized infrared sensor cell lasts for approximately 1000 hours, so you buy fewer replacement parts. Additional features include a charging status indicator, sensor failure indication, sensor test mode and rechargeable NiMH (nickel metal hydride) batteries.
Whisper - Ultrasonic Handheld Leak Detector
Whisper Ultrasonic handheld Leak Detector is ideal for detecting and locating sources of pressre and vaccum leaks where 'sniffer' style detectors are not suitable.
The Whisper Ultrasonic Leak Detector is ideal for detecting and locating sources of ultrasonic sound through the use of sophisticated electronic circuitry.
Unaffected by audible noise, Whisper incorporates an Internal Noise Control allowing for use in extremely noisy environments, such as mechanical plant rooms, and around operating chillers.
Because Whisper is designed to detect ultrasound at 40.5 kHz, not even a murmur will escape detection.
Use the optional transmitter for quick and accurate leak checking in walk-in coolers / freezers, wall and ceiling joints, around doors, windows, ducts, etc.
The Whisper Ultrasonic Leak Detector is ideal for detecting and locating sources of ultrasonic sound through the use of sophisticated electronic circuitry.
Unaffected by audible noise, Whisper incorporates an Internal Noise Control allowing for use in extremely noisy environments, such as mechanical plant rooms, and around operating chillers.
Because Whisper is designed to detect ultrasound at 40.5 kHz, not even a murmur will escape detection.
Use the optional transmitter for quick and accurate leak checking in walk-in coolers / freezers, wall and ceiling joints, around doors, windows, ducts, etc.
About us
CPC UK based in Egham, Surrey have almost 20 years’ experience in the supply, installation, servicing and maintenance of Refrigeration systems, HVAC & lighting controllers, refrigerant leak detectors and temperature/condition monitoring.
CPC UK offer a full comprehensive service from design and manufacture through to project management, installation, commissioning and maintenance. We offer solutions to a wide range of clientele and at the same time ensure high levels of customer service are provided.
We have helped chilled/frozen distribution centres, office blocks, nightclubs, museums and libraries, supermarkets, hotels, banks, pharmaceutical storage/manufacturing, hospitals, ships, food production & industrial processing.
The Benefits of Our Products are:
• Carbon Reduction
• Energy Reduction
• Refrigerant loss
• Cost Saving
CPC UK offer a full comprehensive service from design and manufacture through to project management, installation, commissioning and maintenance. We offer solutions to a wide range of clientele and at the same time ensure high levels of customer service are provided.
We have helped chilled/frozen distribution centres, office blocks, nightclubs, museums and libraries, supermarkets, hotels, banks, pharmaceutical storage/manufacturing, hospitals, ships, food production & industrial processing.
The Benefits of Our Products are:
• Carbon Reduction
• Energy Reduction
• Refrigerant loss
• Cost Saving
Images
